• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Suspension Strut Support Bearing
• Additional information: Suspension Strut Support Bearing

• Fitting Position: Front Axle
• Fabrication Number: AD-VW-032
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 3B-1-300 000*
• Fitting Position: Upper
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 72
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 12
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Vehicle Identification Number (VIN) to: 3B-1-300000
• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Fabrication Number: AD-VW-040

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-022
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 4D0 412 377 D
• Manufacturer: GSP

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• for OE number: 4D0412377F
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.44
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.44
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 54 0017

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Vehicle Identification Number (VIN) from: 3B-1-3000 001
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Height [mm]: 38
• Required quantity: 2
• Material: Rubber/Metal
• Outer Diameter [mm]: 87
• Centering Diameter [mm]: 12
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 3B-1-300001
• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 3B-1-3000 000
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• for OE number: 4D0412377F
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Weight [g]: 209
• Name: IM 35005
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Fitting Position: Upper, Front Axle both sides
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Weight [kg]: 0.2
• Supplementary Article/Info 2: without bearing
• Warranty: 5 years warranty
• Packaging length [cm]: 9.6
• Packaging width [cm]: 8.3
• Packaging height [cm]: 8.2
• Manufacturer: MONROE

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: AD-VW-008
• Manufacturer: NTY

• Construction Year to: 02.2005
• Vehicle Identification Number (VIN) from: 3B-1-300001
• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• for OE number: 3B7 412 377, 3B7 412 377 A
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Quality class: PJ
• Name: Suspension strut support bearing left, right

• Vehicle Identification Number (VIN) to: 3B-1-300000
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Housing Type: Aluminium Housing
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 3B...1...300000
• SVHC: No SVHC present!
• Name: LU 814010110
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 3B-1-300000
• Construction Year to: 03.2001
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Support for shock absorber, rear
• Additional information: Support for shock absorber, rear

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 229
• Name: IM 37668
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR
• Name: SN KB957.06
• Additional information: KB957.06 SNR
• Lisainfo: KB957.06 SNR

• Vehicle Identification Number (VIN) to: 3B-1-3000 000
• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Construction Year to: 02.2005
• Vehicle Identification Number (VIN) to: 3B1300000
• Fitting Position: Rear Axle
• for OE number: 8E0513353B
• Manufacturer: SASIC

• for OE number: 8D0412065
• Fitting Position: Front Axle
• Weight [g]: 525
• Supplementary Article/Info 2: without bearing
• Name: IM 37426
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Required quantity: 2
• Name: TG 00726407
• Manufacturer: TEDGUM

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.024
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI
• Additional information: F23470
• Lisainfo: F23470

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle
• Material: Rubber/Metal
• Weight [kg]: 0.024
• Required quantity: 2
• General Information: suspension strut storage; front
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.42
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO
• Name: COC 80000245

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Special Purpose Vehicle: not for armoured vehicles
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3B-1-300000
• Fitting Position: Rear Axle
• Material: Rubber/Metal
• Manufacturer: BILSTEIN
• Name: BI 12-228720
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Rear Axle
• Weight [kg]: 0.473
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 3B-1-3000 001
• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Vehicle Identification Number (VIN) from: 3B...1...300001
• Fitting Position: Rear Axle
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814015610

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Name: COC 80001593
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) to: 3B-1-3000 000
• Fitting Position: Front Axle
• Technical Information: mounting (x1)
• Manufacturer: KAYABA
• Name: KY SM5236

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Special Purpose Vehicle: not for armoured vehicles
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 93 2147
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-1-3000 001
• Fitting Position: Front Axle
• Manufacturer: KAYABA
• Name: KY SM5380

Technical Information: bushing (x1) / / / Fastenings : suspension mounting nut (x2)

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• for OE number: 8E0 513 253 B, 8E0 513 353 B, 8E0 513 353 C
• Fitting Position: Rear Axle both sides
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A6; VW PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A6; VW PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 3B...1...299999
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814008010

• Vehicle Identification Number (VIN) to: 3B-1-3000 000
• Fitting Position: Rear Axle
• Technical Information: Suspension mounting only (no bearing)
• Manufacturer: KYB
• Name: KY SM9706

• Vehicle Identification Number (VIN) to: 3B13000000
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• for OE number: 8E0 513 253 B, 8E0 513 353 B, 8E0 513 353 C
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• for OE number: 8E0 513 253 B, 8E0 513 353 B, 8E0 513 353 C
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for OE number: 4D0412377D
• Manufacturer: KAMOKA AMORTYZATORY

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 3B7 412 377, 3B7 412 377 A
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER
• Name: LMI 2681601

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 3B7 412 377, 3B7 412 377 A
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 02.2005
• Vehicle Identification Number (VIN) from: 3B1300001
• Fitting Position: Rear Axle
• for OE number: 3B0513353
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.024
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO
• Name: COC 80001570

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• for OE number: 8D0412065G
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.68
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.55
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-1-3000 001
• Fitting Position: Rear Axle
• Manufacturer: KYB
• Name: KY SM5379

Technical Information: Suspension mounting only (no bearing) / / / Fastenings : suspension mounting washer (x2), suspension mounting bolt/screw (x2)

• Construction Year to: 04.2001
• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Fitting Position: Rear Axle
• Drive Type: Front-Wheel Drive
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: SK VKDA40110
• Manufacturer: SKF

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.55
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 92 6725

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 3B0 513 353
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 04.2001
• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Material: Aluminium
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 3B-1-300001
• Fitting Position: Rear Axle
• Name: BI 12-272334
• Manufacturer: BILSTEIN

• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 3B0 513 353
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Weight [kg]: 0.5
• Supplementary Article/Info 2: without bearing
• Warranty: 5 years warranty
• Packaging length [cm]: 13.2
• Packaging width [cm]: 11
• Packaging height [cm]: 10.7
• Manufacturer: MONROE

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB657.12

• Construction Year to: 04.2001
• Vehicle Identification Number (VIN) to: 3B-1-300 000
• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF
• Name: SK VKDA35118

• Fitting Position: Rear Axle
• Weight [kg]: 0.55
• Required quantity: 2
• General Information: shock absorber bearing; upper
• Manufacturer: VIKA

• for OE number: 8D0412065G
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Weight [g]: 801
• Supplementary Article/Info 2: with ball bearing
• Name: IM 35058
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) to: 3B-1-300000
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Manufacturer: BILSTEIN
• Name: BI 12-117642

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Construction Year from: 05.2001
• Vehicle Identification Number (VIN) from: 3B-1-300 001
• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: SK VKDA35124
• Manufacturer: SKF

• Fitting Position: Right, Left, Front Axle
• Outer Diameter 1 [mm]: 80
• Width 1 [mm]: 50
• Inner Diameter 1 [mm]: 12
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.17

• Construction Year to: 04.2001
• Vehicle Identification Number (VIN) to: 3B-1-300000
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Manufacturer: OPTIMAL ZAWIESZENIE