Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 43.95
- Manufacturer: JP GROUP
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Inner Diameter [mm]: 57.85
- Manufacturer: JP GROUP
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Model Year from: 2001
- Inner Diameter [mm]: 58.5
-
Name: Rongastihend,
ohulaadevoolik - Manufacturer: MAX
- Model Year from: 2001
-
Name: Rongastihend,
ohulaadevoolik - Manufacturer: MAX
- Model Year from: 2001
- Weight [kg]: 0.003
- Packaging length [cm]: 5.3
- Packaging width [cm]: 5.3
- Packaging height [cm]: 0.5
- Manufacturer: FEBEST
- Inner Diameter [mm]: 57.85
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Quantity per packing unit: 5
- for OE number: 3C0145117
- Quantity Unit: Packing Unit
- Weight [g]: 4
-
Material: FKM
(fluorocarbon rubber) -
Name: Rongastihend,
ohulaadevoolik - Manufacturer: IBR
- Model Year from: 2001
- Weight [kg]: 0.005
- Inner Diameter [mm]: 58
- Packaging length [cm]: 6.9
- Packaging width [cm]: 6.9
- Packaging height [cm]: 0.5
- Manufacturer: FEBEST
- for OE number: 3C0145117J
- Weight [g]: 11
- Name: IM 20280
- Manufacturer: ORIGINAL IMPERIUM
- Model Year from: 2001
- Model Year to: 2002
- Weight [kg]: 0.038
- Inner Diameter [mm]: 42
- Packaging length [cm]: 5.1
- Packaging width [cm]: 5.1
- Packaging height [cm]: 3.5
- Manufacturer: FEBEST
- Inner Diameter [mm]: 57.85
- Shape: Ring Form
-
Material: FPM
(fluoride rubber) - Always compare old and new part (in particular OE No.):
-
Alternative Repair Kit: 2400113,
2400118, 2400119, 2400129, 2400277 - Manufacturer: METZGER
- for OE number: 3C0145117F
- Weight [g]: 12
- Name: IM 20282
- Manufacturer: ORIGINAL IMPERIUM
- Quantity per packing unit: 10
- Diameter [mm]: 44
- Weight [kg]: 0.025
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.09
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Name: CE 43SKV454
- Manufacturer: ESEN SKV
- Quantity per packing unit: 10
- Diameter [mm]: 56
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Rubber with fabric lining
- Connector Ø pressure side [mm]: 56
- Connector Ø suction side [mm]: 62
-
Fabrication Number: GPP-
VW- 017 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Material: Rubber with fabric lining
- Connector Ø pressure side [mm]: 60
- Connector Ø suction side [mm]: 65
-
Fabrication Number: GPP-
VW- 016 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity per packing unit: 5
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber) - Alternatively:
- Quantity per packing unit: 5
- Inner Diameter [mm]: 43.95
- Quantity: 5
-
Name: Rongastihend,
ohulaadevoolik - Manufacturer: DRM
- for OE number: 3B0 145 828 G
-
Fabrication Number: GPP-
VW- 000 - Manufacturer: NTY
-
Name: NTY GPP-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Upper
- Manufacturer: JP GROUP
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- for OE number: 8D0145834L
- Weight [g]: 181
- Connector Manufacturer: HENN
- Length [mm]: 146
- Inner Diameter 1 [mm]: 50
- Inner Diameter 2 [mm]: 47
- Manufacturer: IMPERGOM
- Name: IM 221863
- for OE number: 3B0 145834 P
- Fitting Position: Upper
- Length [mm]: 188
- Outer Diameter [mm]: 65
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: MAX
- for OE number: 3B0 145834 P
- Fitting Position: Upper
- Length [mm]: 188
- Outer Diameter [mm]: 65
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- Inner Diameter [mm]: 49
- Outer Diameter [mm]: 58
- Outer Diameter 1 [mm]: 65
- Manufacturer: FAST
- for OE number: 3B0 145 834 N
- Material: Rubber with fabric lining
- Connector Ø pressure side [mm]: 58
- Connector Ø suction side [mm]: 62
-
Fabrication Number: GPP-
VW- 026 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Inner Diameter [mm]: 49
- Outer Diameter [mm]: 58
- Turbocharger Line: Charge air cooler to intake manifold
-
Supplementary Article/Supplementary Info: with seal,
with quick coupling - Outer Diameter 1 [mm]: 65
- Weight [kg]: 0.18
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 05.2005
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 130
- Inner Diameter 1 [mm]: 50
- Inner Diameter 2 [mm]: 47
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
- Fitting Position: Left
-
Material: AEM
(Ethylene Acrylate Rubber) - Turbocharger Line: Cold Side
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: MEY
- Fitting Position: Lower
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- for OE number: 058145856C
- Name: Laadimisohu voolik
- Manufacturer: MD
- Weight [kg]: 0.2
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV102
- Fitting Position: Right Front
- Weight [kg]: 0.36
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV002
- Weight [kg]: 0.17
- Weight [g]: 170
- Manufacturer: METALCAUCHO
- Weight [kg]: 0.51
- Weight [g]: 510
- for RPO number: 145088007
- Manufacturer: METALCAUCHO
- Weight [kg]: 0.32
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV025
- Fitting Position: Left Rear
- Inner Diameter [mm]: 49
-
Cooling Hose: Piping to engine block,
Cold Side - Outer Diameter 1 [mm]: 58
- Outer Diameter 2 [mm]: 65
- Weight [kg]: 0.28
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- for OE number: 3B0145834P
- Manufacturer: SASIC
- for OE number: 3B0 145828 G
-
Fitting Position: Charge Air Cooler,
Lower - Length [mm]: 374
- Outer Diameter 1 [mm]: 65
- Outer Diameter 2 [mm]: 50
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: MAX
-
Fitting Position: Upper,
Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 3B0 145 834 P
-
Fitting Position: Exhaust Turbocharger,
Upper - Manufacturer: METZGER
- for OE number: 8D0145834J
- Weight [g]: 320
- Connector Manufacturer: HENN
- Length [mm]: 170
- Inner Diameter 1 [mm]: 51
- Inner Diameter 2 [mm]: 51
- Manufacturer: IMPERGOM
- Name: IM 221860
- for OE number: 3B0145828G
- Quantity Unit: Piece
- Weight [g]: 400
-
Material, 1st layer: NBR
(nitrile butadiene rubber) - Material, 2nd layer: Aramid
-
Material, 3rd layer: CR
(chloroprene rubber) - Name: Laadimisohu voolik
- Manufacturer: IBR
-
Fitting Position: Charge Air Cooler,
Inlet - Name: Laadimisohu voolik
- Manufacturer: NRF
- Fitting Position: Upper
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- for OE number: 3B0 145828 G
-
Fitting Position: Charge Air Cooler,
Lower - Length [mm]: 374
- Outer Diameter 1 [mm]: 65
- Outer Diameter 2 [mm]: 50
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- Connector Ø pressure side [mm]: 56
- Connector Ø suction side [mm]: 62
- Compression ring material: Stainless Steel
- Weight [kg]: 0.117
- Material: Rubber with fabric lining
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Charge Air Cooler,
Inlet - Manufacturer: FAST
- for OE number: 3B0145834AC
- Name: Laadimisohu voolik
- Manufacturer: MD
-
Fitting Position: Lower,
Right - Manufacturer: FAST
- for OE number: 8D0145828J
- Weight [g]: 358
- Connector Manufacturer: HENN
- Length [mm]: 270
- Inner Diameter 1 [mm]: 49
- Inner Diameter 2 [mm]: 36
- Manufacturer: IMPERGOM
- Name: IM 221837
- Fitting Position: Charge Air Cooler
- for OE number: 3B0145828G
- Name: Laadimisohu voolik
- Manufacturer: NRF
-
Fitting Position: Lower,
engine sided -
Supplementary Article/Supplementary Info: with gaskets/
seals - Hose Type: Moulded Hose
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Right Front
-
Cooling Hose: Charge air cooler to piping,
Cold Side - Weight [kg]: 0.5
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Fitting Position: Lower Right
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year to: 05.2005
-
Turbocharger Line: Hot Side,
Piping to charge air cooler -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 150
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Observe broschure:
- Manufacturer: GATES
- Construction Year to: 05.2005
-
Turbocharger Line: Hot Side,
Turbocharger to piping -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 340
- Inner Diameter 1 [mm]: 52
- Inner Diameter 2 [mm]: 38
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
-
Fitting Position: Charge Air Cooler,
Upper -
Supplementary Article/Supplementary Info: with gaskets/
seals - Hose Type: Moulded Hose
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Outlet
- for OE number: 3B0145828G
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: SAS
- for OE number: 8D0145834K
- Weight [g]: 610
- Connector Manufacturer: HENN
- Length [mm]: 422
- Inner Diameter 1 [mm]: 52
- Inner Diameter 2 [mm]: 52
- Manufacturer: IMPERGOM
- Name: IM 221847
- Fitting Position: Lower
- Weight [kg]: 0.26
- Weight [g]: 260
- Manufacturer: METALCAUCHO
-
Fitting Position: Lower,
Front - Connector type: OE PUSH CONNECTOR
- Length [mm]: 150
- Colour: black
-
Material: AEM
(Ethylene Acrylate Rubber) - Supplementary Article/Info 2: without hose clip
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Manufacturer: BORG & BECK
- Weight [kg]: 0.32
- Weight [g]: 320
- Manufacturer: METALCAUCHO
-
Fitting Position: Charge Air Cooler,
Inlet - for OE number: 3B0145834AC
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: SAS
- for OE number: 3B0145834N
- Quantity Unit: Piece
- Weight [g]: 605
-
Material, 1st layer: NBR
(nitrile butadiene rubber) - Material, 2nd layer: Aramid
-
Material, 3rd layer: CR
(chloroprene rubber) - Name: Laadimisohu voolik
- Manufacturer: IBR
- Fitting Position: Charge Air Cooler
- for OE number: 8D0145834K
- Name: Laadimisohu voolik
- Manufacturer: NRF
- Connector Ø pressure side [mm]: 46
- Connector Ø suction side [mm]: 59
- Compression ring material: Stainless Steel
- for OE number: 3B0 145 828 G
- Material: Rubber with fabric lining
- Weight [kg]: 0.39
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 3B0145834N
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: SAS
- Turbocharger Line: Piping to charge air cooler
-
Material: ACM
(Polyacrylate) -
Fitting Position: Charge Air Cooler,
Upper - Weight [kg]: 0.56
- Supplementary Article/Info 2: with quick couplers
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: FEB
- Additional information: FE101435
- Lisainfo: FE101435
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: AEM
(Ethylene Acrylate Rubber) - Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: MEY
- Fitting Position: Lower Right
- Weight [kg]: 0.338
- Required quantity: 1
- General Information: pressure hose
- Manufacturer: VIKA
- Fitting Position: Upper
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Turbocharger Line: Turbocharger to piping
-
Material: AEM
(Ethylene Acrylate Rubber) -
Fitting Position: Charge Air Cooler,
Right - Weight [kg]: 0.338
- Supplementary Article/Info 2: with quick couplers
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 05.2005
-
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 500
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Observe broschure:
- Manufacturer: GATES
-
Turbocharger Line: Hot Side,
Piping to charge air cooler - Connector Ø pressure side [mm]: 60
- Connector Ø suction side [mm]: 65
- Weight [kg]: 0.115
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector Ø pressure side [mm]: 58
- Connector Ø suction side [mm]: 62
- Compression ring material: Stainless Steel
- Material: Rubber with fabric lining
- for OE number: 3B0 145 834 N
- Weight [kg]: 0.614
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 100
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber)