Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Suspension: for vehicles without bad road version
-
for PR number: 1BA,
1BE, 1BH -
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Thermoplast
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
for PR number: 1BA,
1BB, 1BF, 1BH - Fitting Position: Front Axle
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
Suspension: for vehicles with comfort suspension, for vehicles with bad road version, for vehicles with heavy duty suspension
- Fitting Position: Front Axle
- Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles without bad road version
-
for PR number: 1BA,
1BE, 1BH - Fitting Position: Rear Axle
- Material: Thermoplast
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. A80/PASSA
- Quantity: 2
- Fitting Position: Front Axle
- Thickness [mm]: 80
- Weight [kg]: 0.04
- Required quantity: 2
- General Information: protective pipe; front
- Manufacturer: VIKA
- Suspension: for vehicles without bad road version
-
for PR number: 1BA,
1BE, 1BH - Fitting Position: Rear Axle
- Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with sports suspension
- for PR number: 1BE
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Thickness [mm]: 77
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
- Suspension: for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 810003410
Suspension: for vehicles without sports suspension, for vehicles with bad road version
- for OE number: 4D0412137B
- Fitting Position: Front Axle
- Height [mm]: 80
- Material: Plastic
- Weight [g]: 38
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 63
- Name: IM 37423
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
-
for PR number: 1BA,
1BB, 1BF, 1BH - Manufacturer: DELLO AUTOMEGA
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with bad road version
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- for PR number: 1BE
- Manufacturer: DELLO AUTOMEGA
- Suspension: for vehicles without sports suspension
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 85
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 85
- for OE number: 8D0412131F
- Manufacturer: SASIC
-
for PR number: 1BA,
1BB, 1BF, 1BH -
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 136
- Replace in pairs only:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with sports suspension
-
Fitting Position: Front Axle Right,
Front Axle Left - Height [mm]: 77
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 3B-
1- 300 001 - Fitting Position: Front Axle
- Height [mm]: 51
- Outer Diameter [mm]: 81
- for OE number: 3B7412377A
- Manufacturer: DELLO AUTOMEGA
-
for PR number: 1BA,
1BB, 1BF, 1BH -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS
-
for PR number: 1BA,
1BH -
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 67
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Height [mm]: 67
- Required quantity: 2
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
- Fitting Position: Front Axle
- Height [mm]: 85
- Manufacturer: OPTIMAL ZAWIESZENIE
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: SWAG
- Name: SW 30 93 6728
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 8D0412131D
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane) - Weight [g]: 85
- Name: IM 37435
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) to: 3B-
3- 275 000 -
for PR number: 1BJ,
1BA, 1BH - Block Separation:
- Width [mm]: 58
- Thickness [mm]: 85
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.1
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- for PR number: 1BE
- Thickness [mm]: 77
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.08
-
Name: Puhver,
vedrustus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Name: PUHVER,
VEDRUSTUS - Manufacturer: LMI
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles without sports suspension SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Height [mm]: 77
- for OE number: 8D0412131E
- Manufacturer: SASIC
Fabrication Number: ZWT-VW-030SK
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Height [mm]: 77
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
Suspension: for vehicles with bad road version, for vehicles with sports suspension
- Fitting Position: Front Axle
- Height [mm]: 85
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
Suspension: for vehicles without bad road version, for vehicles without sports suspension
-
Vehicle Identification Number (VIN) from: 3B-
3- 275 001 - Suspension: for vehicles with heavy duty suspension
- for PR number: 1BJ
- Height [mm]: 100
- Fitting Position: Front Axle
- Diameter [mm]: 58
- Weight [kg]: 0.09
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Braking/Drive Dynamics: for vehicles without ABS
-
for PR number: 1KW,
1X1, F4S -
Supplementary Article/Info 2: with protect screen,
with nut - Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Height [mm]: 67
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: PU
(Polyurethane) - Weight [g]: 68
- Thickness [mm]: 67
- Name: IM 37512
- Manufacturer: ORIGINAL IMPERIUM
- for combined PR number: 1BA+1BH
- Block Separation:
- for PR number: 1BJ
- Thickness [mm]: 67
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.056
- Manufacturer: SWAG
- Lisainfo: 30 91 9282 SWA
- Additional information: 30 91 9282 SWA
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for combined PR number: 1BA+1BH
- Block Separation:
- for PR number: 1BJ
- Thickness [mm]: 67
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.056
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- not for variant code: W8
- Fitting Position: Front Axle
- for OE number: 4D0412137C
- Manufacturer: KAMOKA AMORTYZATORY
- Supplementary Article/Info 2: with protect screen
- Thread Size: M12x1.5
- Screw length below head [mm]: 95
- not for trim level: W8
- Fitting Position: Front Axle
- Name: CFD PK4711
- Manufacturer: DACO
-
Vehicle Identification Number (VIN) from: 3B-
3- 275 001 - Suspension: for vehicles with heavy duty suspension
- for PR number: 1BJ
- Thickness [mm]: 94
- Inner Diameter [mm]: 20.3
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 3B-
YE121222 - Suspension: for vehicles with bad road version
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Model Year from: 2001
- Weight [kg]: 0.163
- Packaging length [cm]: 10.5
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
for PR number: 1BA, 1BB, 1BE, 1BF, 1BH, 1KD, 1KE, 1KF, 1KW, 1X1, D3E, F0A, F4E, F4F, F4G, F4J, F4Q, F4X, M3E, M70, MC9, MK6, MR2, MT0, MT1
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
-
Lisainfo: 72-
1219 -
Additional information: 72-
1219
- Quantity: 2
-
Vehicle Identification Number (VIN) to: 3B-
3- 275 000 - Fitting Position: Front Axle
- General Information: repair kit for shock absorber; front
- Manufacturer: VIKA
- Block Separation:
- for PR number: 1BC
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
-
Lisainfo: Dust Cover Kit,
shock absorber -
Additional information: Dust Cover Kit,
shock absorber
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with sports suspension
-
Fitting Position: Front Axle,
Front Axle both sides - Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
- Model Year from: 2001
- Weight [kg]: 0.18
- Packaging length [cm]: 12.8
- Packaging width [cm]: 3.8
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
for PR number: 1BA, 1BB, 1BE, 1BF, 1BH, 1KD, 1KE, 1KF, 1KW, 1X1, D3E, F0A, F4E, F4F, F4G, F4J, F4Q, F4X, M3E, M70, MC9, MK6, MR2, MT0, MT1
- Fitting Position: Front Axle
- Name: MM APK0064
- Manufacturer: MAGNETI MARELLI
-
Vehicle Identification Number (VIN) from: 3B-
YE121222 - Suspension: for vehicles with bad road version
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- for OE number: 8D0412131F
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 202
- Component Number: 4
- Name: IM 50135
- Manufacturer: ORIGINAL IMPERIUM
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- Suspension: for vehicles with heavy duty suspension
-
for PR number: 1BB,
1BF - Block Separation:
- Thickness [mm]: 61
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- for OE number: 8D0412131F
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: AUT
- Additional information: D5096
- Lisainfo: D5096
- Model Year from: 2001
- Fitting Position: Front Axle
- Weight [kg]: 0.273
- Packaging length [cm]: 8.3
- Packaging width [cm]: 8.3
- Packaging height [cm]: 5.2
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) from: 3B-
YE121222 - Suspension: for vehicles with bad road version
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Additional information: 915708 KYB
- Lisainfo: 915708 KYB
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- Fitting Position: Front Axle
- not for trim level: W8
- Weight [kg]: 0.4
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
-
for combined PR number: 1BA+1BH,
1BB+1BF+1BJ - Block Separation:
- for PR number: 1BC
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.55
-
Name: Puhver,
vedrustus - Manufacturer: FEB
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with sports suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles without sports suspension
- Quantity per axle: 1
- Manufacturer: SKF