• Fitting Position: Front Axle
• Brake Type: Disc Brake
• for PR number: 1LC
• Length [mm]: 440
• Number of wear indicators [per axle]: 2
• Net weight [kg]: 0.01

• Cable Length [mm]: 1,025
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-007
• Manufacturer: NTY
• Name: NTY HCA-AU-007

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 112
• for brake disc diameter [mm]: 280, 288
• Manufacturer: JP GROUP
• Lisainfo: Splash shield, front, left
• Additional information: Splash shield, front, left

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 112
• for brake disc diameter [mm]: 280, 288
• Manufacturer: JP GROUP
• Lisainfo: Splash shield, front, right
• Additional information: Splash shield, front, right

• for PR number: 1LT, 1ZG
• Production date to: 31.03.2003
• for brake disc diameter [mm]: 312, 321
• for brake disc thickness [mm]: 25, 30
• Block Separation:
• Vehicle Identification Number (VIN) from: 3B-3-000001
• Vehicle Identification Number (VIN) to: 3B-3-450000
• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 310
• Inner Diameter [mm]: 150

• for PR number: 1LT, 1ZG
• Production date to: 31.03.2003
• for brake disc diameter [mm]: 312, 321
• for brake disc thickness [mm]: 25, 30
• Block Separation:
• Vehicle Identification Number (VIN) from: 3B-3-000001
• Vehicle Identification Number (VIN) to: 3B-3-450000
• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 310
• Inner Diameter [mm]: 150

• Braking/Drive Dynamics: for vehicles with ESP
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Inductive Sensor
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Rear Axle
• Brake System: LUCAS/TRW
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Weight [kg]: 0.015
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Brake System: LUCAS/TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT
• Additional information: D42342A AUT
• Lisainfo: D42342A AUT

• for brake disc thickness [mm]: 32
• for brake disc diameter [mm]: 334
• for PR number: 1LC
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 440
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• for brake disc thickness [mm]: 10, 22
• for brake disc diameter [mm]: 245, 256, 269
• for PR number: 1KD, 1KF, 1KE, 1KW
• Block Separation:
• Fitting Position: Rear Axle
• Weight [kg]: 0.035
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: TRW
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• for PR number: 1LC
• Brake Type: Disc Brake
• Length [mm]: 440
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 2
• Manufacturer Restriction: ATE
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Quality: WP
• for brake disc diameter [mm]: 312, 321

• for brake disc thickness [mm]: 32
• for brake disc diameter [mm]: 334
• for PR number: 1LC
• Length [mm]: 245
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.015
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc thickness [mm]: 32
• for brake disc diameter [mm]: 334
• for PR number: 1LC
• Length [mm]: 245
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.015
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1KD, 1KE, 1KF, 1KW
• Fitting Position: Rear Axle
• Brake System: Lucas / TRW
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: ATE
• Lisainfo: 13.0460-0072.2
• Additional information: 13.0460-0072.2

• Fitting Position: Rear Axle
• Brake System: LUCAS/TRW
• Manufacturer: ERT

• Fitting Position: Rear Axle
• Quantity: 4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0307
• Quality class: PJ

Additional information: "Tootja: DELPHI
AUDI/FIAT/RENAULT/VW
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
AUDI/FIAT/RENAULT/VW
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake System: ATE
• Name: SE D4-3041A
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• for PR number: 1KE, 1KW
• Brake System: Lucas
• Number of Parts [parts]: 4
• Packaging length [cm]: 18.5
• Packaging width [cm]: 12.5
• Packaging height [cm]: 1
• Weight [kg]: 0.085
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• for PR number: 1KE, 1KW
• Brake System: Trw-Lucas
• Name: BR A 02 205
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Special Purpose Vehicle: not for armoured vehicles
• for PR number: 1ZF, 1ZG
• Length [mm]: 235
• Brake Type: Disc Brake
• Manufacturer: LPR

• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• for OE number: 8D0615311E
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 280, 288
• Fabrication Number: HTO-VW-040
• Manufacturer: NTY
• Name: NTY HTO-VW-040

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 280, 288
• Fabrication Number: HTO-VW-041
• Manufacturer: NTY
• Name: NTY HTO-VW-041

• for PR number: 1LC
• Fitting Position: Front Axle
• Brake System: Teves
• Weight [kg]: 0.103
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,025
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Left, Front Axle, Front Axle Left
• Diameter 1/ Diameter 2 [mm]: 300/112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• Name: CFD 610210
• Manufacturer: DACO

• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 112
• Outer Diameter [mm]: 300
• for brake disc diameter [mm]: 280
• paired article number: 131-07-141
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Article number of recommended accessories: 231-03-014
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Right, Front Axle, Front Axle Right
• Diameter 1/ Diameter 2 [mm]: 300/112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• Name: CFD 610211
• Manufacturer: DACO

• Special Purpose Vehicle: for armoured vehicles
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-008
• Rim Size [inch]: 18.0
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 112
• Outer Diameter [mm]: 300
• for brake disc diameter [mm]: 280
• paired article number: 131-07-142
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Article number of recommended accessories: 231-03-014
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• for brake disc diameter [mm]: 312, 321
• for OE number: 8D0615311G
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• for brake disc diameter [mm]: 312, 321
• for OE number: 8D0615312G
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 312, 321
• Fabrication Number: HTO-VW-046
• Manufacturer: NTY
• Name: NTY HTO-VW-046

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 312, 321
• Fabrication Number: HTO-VW-047
• Manufacturer: NTY
• Name: NTY HTO-VW-047

• paired article number: 19-3453
• for brake disc diameter [mm]: 288
• Fitting Position: Front Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paired article number: 19-3454
• for brake disc diameter [mm]: 288
• Fitting Position: Front Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Model Year from: 2001, 2003
• Model Year to: 2003
• for PR number: 1ZC, 1LE
• for brake disc diameter [mm]: 282
• for brake disc thickness [mm]: 25
• Block Separation:
• Manufacturer Restriction: ATE
• Vehicle Identification Number (VIN) from: J
• Vehicle Identification Number (VIN) to: 3B-3E405 449, 3B-3P432 812
• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: V10-3903
• Weight [kg]: 0.219
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year from: 2001, 2003
• Model Year to: 2003
• for PR number: 1ZC, 1LE
• for brake disc diameter [mm]: 282
• for brake disc thickness [mm]: 25
• Block Separation:
• Manufacturer Restriction: ATE
• Vehicle Identification Number (VIN) from: J
• Vehicle Identification Number (VIN) to: 3B-3E405 449, 3B-3P432 812
• Fitting Position: Front Axle Left
• paired article number: V10-3904
• Material: Sheet Steel
• Surface: Zinc-coated
• Weight [kg]: 0.219
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• paired article number: 11126
• Weight [kg]: 0.15
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• paired article number: 11125
• Weight [kg]: 0.15
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 312
• paired article number: 131-07-188
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 312
• paired article number: 131-07-187
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Special Purpose Vehicle: for armoured vehicles
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Left, Front Axle
• for brake disc diameter [mm]: 312, 321
• Name: CFD 614238
• Manufacturer: DACO

• Model Year from: 2001, 2003
• Model Year to: 2003
• for PR number: 1ZC, 1LE
• for brake disc diameter [mm]: 282
• for brake disc thickness [mm]: 25
• Block Separation:
• Manufacturer Restriction: ATE
• Vehicle Identification Number (VIN) from: J
• Vehicle Identification Number (VIN) to: 3B-3E405 449, 3B-3P432 812
• Fitting Position: Front Axle Left
• paired article number: 6115216
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Model Year from: 2001, 2003
• Model Year to: 2003
• for PR number: 1ZC, 1LE
• for brake disc diameter [mm]: 282
• for brake disc thickness [mm]: 25
• Block Separation:
• Manufacturer Restriction: ATE
• Vehicle Identification Number (VIN) from: J
• Vehicle Identification Number (VIN) to: 3B-3E405 449, 3B-3P432 812
• Fitting Position: Front Axle Right
• paired article number: 6115215
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 280, 288
• paired article number: 8125 29114
• Diameter 1/ Diameter 2 [mm]: 300/112
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Special Purpose Vehicle: not for armoured vehicles
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,025
• for OE number: 8D0 927 803 B
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Name: Brake dust shield right
• Quality class: PJ

Lisainfo: AUDI A4, 94- (kvaliteediklass PJ)

• Fitting Position: Front Axle
• for PR number: 1LC
• Brake Type: Disc Brake
• Manufacturer Restriction: ATE
• Length [mm]: 440
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Name: Brake dust shield left
• Quality class: PJ

Lisainfo: AUDI A4, 94- (kvaliteediklass PJ)

• paired article number: 19-3246
• for brake disc diameter [mm]: 245
• Fitting Position: Rear Axle Right
• Name: PLEKK,PIDURIKETAS
• Manufacturer: MAX

• paired article number: 19-3247
• for brake disc diameter [mm]: 245
• Fitting Position: Rear Axle Left
• Name: PLEKK,PIDURIKETAS
• Manufacturer: MAX

• for OE number: 8D0 615 311 E
• Fitting Position: Front Axle Left
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle
• Resistor [Ohm]: 1,650
• Cable Length [mm]: 1,090
• for OE number: 3B0927807B
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI

• for OE number: 8D0 615 312 E
• Fitting Position: Front Axle Right
• Manufacturer: TRUCKTEC

• for brake disc diameter [mm]: 288
• Diameter 1/ Diameter 2 [mm]: 300/112
• Fitting Position: Front Axle Left
• Net weight [kg]: 0.22
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• for brake disc diameter [mm]: 288
• Diameter 1/ Diameter 2 [mm]: 300/112
• Fitting Position: Front Axle Right
• Net weight [kg]: 0.22
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 965
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 245
• Fitting Position: Rear Axle Right
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-1018L
• Manufacturer: OPTIMAL ZAWIESZENIE

• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 985
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Sensor Type: Passive sensor
• Number of pins: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 980
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0031

• Sensor Type: Passive sensor
• Number of pins: 4
• Cable Length [mm]: 980
• Fitting Position: Front Axle Right, Front Axle Left
• Name: SE DS0012
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle Left
• Quality: WP
• for brake disc diameter [mm]: 312, 321

• Required quantity: 2
• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

Vehicle Equipment: for vehicles without headlight levelling (automatic)

• Special Purpose Vehicle: for special-purpose vehicles
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Special Purpose Vehicle: for armoured vehicles
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 55542
• Diameter 1/ Diameter 2 [mm]: 80 / 300
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 55541
• Diameter 1/ Diameter 2 [mm]: 80 / 300
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,120
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0037

• for PR number: 1ZF, 1ZG
• Special Purpose Vehicle: not for armoured vehicles
• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 235
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front
• Length [mm]: 1,000
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: red/black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV009

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Front Axle Right
• Diameter 1/ Diameter 2 [mm]: 300/112
• for brake disc diameter [mm]: 280, 288
• Surface: Zinc-coated

• Vehicle Identification Number (VIN) to: 3B-3-450 000
• for PR number: 1LT, 1ZG
• Block Separation:
• paired article number: 175285
• Fitting Position: Front Axle Left
• Weight [kg]: 0.223
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3B-3-450 000
• for PR number: 1LT, 1ZG
• Block Separation:
• paired article number: 175284
• Fitting Position: Front Axle Right
• Weight [kg]: 0.223
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• General Information: cover plate for brake disc; front left
• Manufacturer: VIKA

• Fitting Position: Front Axle Right
• General Information: cover plate for brake disc; front right
• Manufacturer: VIKA

• Special Purpose Vehicle: for armoured vehicles
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front
• Length [mm]: 990
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: red/black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV015
• Manufacturer: ESEN SKV