• Construction Year to: 04.2002
• Vehicle Identification Number (VIN) to: 2-500 000
• for OE number: 023906262
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,250
• Number of pins: 4
• Weight [g]: 160
• Gross Weight [g]: 193
• Name: DN DOX-2012
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Fitted Diameter [mm]: 20
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Engine Code: AZX
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: AZX
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Number of pins: 4
• Housing Colour: green
• Fitted Diameter [mm]: 20
• Connector Shape: round
• Manufacturer: FAE

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Number of pins: 4
• for OE number: 036 906 051 C
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• for OE number: 06B906051
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Connector Shape: D Shape
• Colour: black
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• for OE number: 06A905161A
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV489

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW GOLF III 2.9 VR6 SYNCRO 94-

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Fabrication Number: EPP-VW-010
• Manufacturer: NTY

• Construction Year from: 01.2001
• Voltage [V]: 12
• Number of connectors: 2
• Fitting Depth [mm]: 44
• Manufacturer: BERU

• Fitting Position: before catalytic converter
• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 22.6
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Construction Year from: 05.2002
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 01.2001
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.09
• Name: VA 253814
• Manufacturer: VALEO

• Construction Year to: 04.2002
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Engine Code: AZX
• Required quantity: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

Manufacturer: BOSCH

• Vehicle Identification Number (VIN) to: 2-500 000
• Engine Code: AZX
• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Length [mm]: 50
• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 9
• Number of circuits: 4
• Length [mm]: 1,731
• Conductor Number: 4
• Cable Length [mm]: 1,731
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: AZX
• Warranty: 5 years warranty
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC

• Housing Type: with housing
• Number of pins: 2
• Housing material: Plastic
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• Article number of recommended accessories: 113 883
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Construction Year from: 05.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 04.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 04.2002
• Number of pins: 5
• Overall Length [mm]: 1,510
• Lambda Sensor: Regulating Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 2
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

• Construction Year to: 04.2002
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Number of circuits: 5
• Length [mm]: 1,510
• Conductor Number: 5
• Cable Length [mm]: 1,510
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Vehicle Identification Number (VIN) to: 2-500 000
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.23
• Name: VA 368003
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Engine Code: AZX
• Construction Year to: 04.2002
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 1,500
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 04.2002
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV907

• Construction Year to: 04.2002
• Fitting Position: before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 1,500
• Number of pins: 6
• Exhaust System: before catalytic converter
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166821

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• for PR number: 0L2
• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for PR number: 0L2
• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Connector Shape: D Shape
• Cable Length [mm]: 1,360
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: Exhaust Manifold
• for article number: 81519
• Manufacturer: MEAT&DORIA

• Construction Year from: 05.2002
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 1,720
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: BOS

• Construction Year to: 04.2002
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of pins: 5
• Overall Length [mm]: 1,510
• Recommended change interval [km]: 250,000
• Manufacturer: METZGER