• Fitting Position: Upper, Rear, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: for control arm
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

Lisainfo: Rubber mount for wishbone, front, outer

Lisainfo: Rubber mount for wishbone, front

• Quantity per packing unit: 5
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Fitting Position: inner, Upper, Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.118
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Right, Left, Front Axle
• Required quantity: 4
• Manufacturer: CORTECO
• Name: COC 80004742

• Fitting Position: Front Axle, inner, Upper, Lower, Front, Rear
• Construction Year to: 03.2008
• Vehicle Identification Number (VIN) to: 3D8005000, 3D8005001
• Block Separation:
• Construction Year from: 04.2008
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 40
• Manufacturer: DELPHI
• Name: DE TD437W

• Fitting Position: Upper, Front Axle
• Manufacturer: GSP

• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 47
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Name: Puks - K„„ndmik VW P. A4/A6/A8 LE/PR PRZEDNIA
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: for control arm
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"

• Outer Diameter [mm]: 55.2
• Fitting Position: Front Axle, both sides, Front, inner, Lower
• Required quantity: 2
• Weight [kg]: 0.165
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM_TD

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Upper, both sides, Front, Rear, inner
• Length [mm]: 40
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.4
• Quantity per axle: 4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 47
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Name: SW 32 93 0696
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper Front Axle, inner
• Material: Rubber/Metal
• Outer Diameter [mm]: 46
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A4/A6/A8 LE/PR PRZEDNIA
• Manufacturer: MAX

• Outer Diameter [mm]: 46.4
• Weight [kg]: 0.08
• Required quantity: 2
• Fitting Position: Front, Rear, Upper Front Axle, both sides
• Inner Diameter [mm]: 10
• Manufacturer: TEDGUM

• Fitting Position: outer, Lower, Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 44
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 45
• Manufacturer: BGA

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Width [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 46.4
• Inner Diameter [mm]: 10
• Length [mm]: 40
• Weight [kg]: 0.088
• Manufacturer: RTS

• Fitting Position: inner, Lower Front Axle
• for OE number: 4E0407181D
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Height [mm]: 60
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 55.3
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.16
• Name: DY 37-06164-5
• Manufacturer: DYS

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: outer, Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331028
• Length [mm]: 45
• Height [mm]: 43.8
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 43.8
• Name: SK VKDS331028
• Manufacturer: SKF

• Model Year to: 2009
• Fitting Position: in front of axle, outer, Lower Front Axle
• Weight [kg]: 0.112
• Packaging length [cm]: 4.9
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right, Front Axle Left, Upper
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A4/A6/A8 LE/PR PRZEDNIA
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Model Year to: 2009
• Fitting Position: Front, Rear, Upper Front Axle, outer
• Weight [kg]: 0.135
• Packaging length [cm]: 4.6
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 4
• Name: Puks - K„„ndmik VW P. A4/A6/A8 LE/PR PRZEDNIA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 43.8
• Length [mm]: 45
• paired article number: 270762
• Weight [kg]: 0.11
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, outer, Lower

• Construction Year to: 11.2014
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 44, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, Centre, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.169
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW T. A8/S8/PHATEON 02- WEW. 44X24MM

• Fitting Position: Front Axle, outer, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 44
• Thickness 1 [mm]: 45
• Manufacturer: DELPHI
• Name: DE TD723W

• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 55, 28
• Material: Rubber/Metal
• Weight [kg]: 0.199
• Name: Puks - K„„ndmik VW P. A6/A8 DOLNEG
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 4E0407151K
• Required quantity: 2
• Fitting Position: in front of axle, inner, Lower Front Axle
• Weight [kg]: 0.183
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right, Front Axle Left, Lower, Rear
• Height [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A4 04-
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: inner, Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331075
• Name: SK VKDS331075
• Manufacturer: SKF

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, both sides, Front, inner
• Manufacturer: TRW

for OE number: 4F0407151, 4F0407151A, 4E0407151K, 4E0407151J, 4E0407151E, 4E0407151L, 4E0407151G SVHC: No information available, please contact the manufacturer!

• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A6/A8 DOLNEG
• Manufacturer: MEY

Fitting Position: inner, Front, Lower, Front Axle Left, Front Axle Right General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Front Axle, inner, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 55
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD1240W

• Fitting Position: Rear Axle Right, Rear Axle Left
• Name: COC 49398219
• Manufacturer: CORTECO

• Fitting Position: Front Axle, Lower, Rear
• Fabrication Number: ZTP-AU-035

• Model Year to: 2009
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.11
• Packaging length [cm]: 5.1
• Packaging width [cm]: 5.1
• Packaging height [cm]: 2.9
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, both sides, Front, inner
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 39097 01
• Observe service information:
• Name: Puks - K„„ndmik VW P. A6/A8 DOLNEG
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• for OE number: 4E0407693N, 4E0407694N
• Fitting Position: Rear, Lower, Front Axle Right, Front Axle Left
• Height [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Manufacturer: MAX

Name: Puks - K„„ndmik VW P. A6/A7 1,8TFSI/2,0TFSI/2,0TDI/2,8FSI/3,0TFSI/3,0TDI/RS TY 10-

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Height [mm]: 80
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 75
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Rear, inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331074
• Mounting Type: Hydro Mount
• Name: SK VKDS331074
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.12
• Name: DY 37-23487
• Manufacturer: DYS

• Construction Year to: 11.2014
• Thickness [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44, 25
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.097
• Manufacturer: FEB
• Additional information: NRF31756
• Lisainfo: NRF31756

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW T. A8/S8/PHATEON 02- ZEW. 44X25MM

• Fitting Position: Front Axle Right, Front Axle Left, Lower, Rear
• Height [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A6/A8/PHAETON
• Manufacturer: MEY

General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.

• Fitting Position: Front Axle, inner, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 75
• Thickness 1 [mm]: 80
• Manufacturer: DELPHI
• Name: DE TD1247W

• Fitting Position: Front Axle, both sides
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Mounting Type: Hydro Mount
• Axle alignment required after fitting:
• Width [mm]: 75
• Weight [kg]: 0.499
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year to: 2009
• Fitting Position: Rear Axle Lower, Rear, inner
• Weight [kg]: 0.267
• Packaging length [cm]: 6.1
• Packaging width [cm]: 6.1
• Packaging height [cm]: 6.1
• Manufacturer: FEBEST

• Length [mm]: 80
• Width [mm]: 75
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 75
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.71
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, both sides, Lower, Rear
• Quantity per axle: 2
• Manufacturer: LMI
• Lisainfo: 30723 01 LEM
• Additional information: 30723 01 LEM

SVHC: No information available, please contact the manufacturer! Name: Puks - K„„ndmik VW P. A8/PHAETON 03- LE/PR DOLNA TYLNA