• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Lisainfo: Fuel filter
• Additional information: Fuel filter

Lisainfo: Brake pad set, front, 19.7 mm PR 1LQ 1LS 1LR

Lisainfo: Brake Pad Set, disc brake

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 36
• Inner Diameter [mm]: 6
• Height [mm]: 105
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)"

• Outer Diameter [mm]: 31.5
• Length [mm]: 140
• Width [mm]: 95
• Height [mm]: 142
• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 37
• Weight [kg]: 0.104
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Outer Diameter [mm]: 36
• Overall Length [mm]: 136
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 125
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: KAMOKA FILTRY PALIWA

• Construction Year to: 08.1982
• Engine Code: EH,GH,JB
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: In-Line Filter
• Length [mm]: 97
• Outer Diameter [mm]: 49
• Diameter 1/ Diameter 2 [mm]: IN/OUT: 8
• Manufacturer: JAPKO

• Height [mm]: 119
• Outer Diameter [mm]: 53
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 6.3
• Outlet Ø [mm]: 6.3
• Packaging length [cm]: 5.8
• Packaging width [cm]: 5.8
• Packaging height [cm]: 11.6
• Name: CH CFF100101
• Manufacturer: CHAMPION

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Height [mm]: 142
• Outer Diameter [mm]: 31.5
• Outer Diameter 1 [mm]: 37
• Outlet Ø [mm]: 6.5
• Inlet Ø [mm]: 8.4
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Manufacturer: KNECHT
• Name: KN KL15OF

• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outlet Ø [mm]: 6
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Engine Code: JB
• Height [mm]: 118
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 6
• Outer Diameter [mm]: 48
• Manufacturer: MAGNETI MARELLI

• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Driven Units: Camshaft
• Trim Level: CR
• Number of Teeth: 121
• Width [mm]: 18
• Manufacturer: DAYCO
• Name: DA 94017

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Manufacturer: GATES

• Supplementary Article/Supplementary Info: without accessories
• Width [mm]: 24
• Outer Diameter [mm]: 72
• Manufacturer: KAMOKA

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Driven Units: Camshaft
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH
• Name: CT 637

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with lever
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Width [mm]: 20
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.3
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.1983
• Diameter [mm]: 180
• Width [mm]: 31
• Fitting Position: Rear Axle
• Brake System: VAG
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Width [mm]: 20.4
• Outer Diameter [mm]: 72
• Weight [kg]: 0.38
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Width [mm]: 31
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 180
• Manufacturer: BREMBO
• Name: BR S 85 507

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Width [mm]: 31
• Brake System: Ate/Teves
• Inner brake drum diameter [mm]: 180
• Weight [kg]: 1.03
• Manufacturer: TOMEX BRAKES

• Width [mm]: 31
• Outer Diameter [mm]: 180
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Weight [kg]: 1.14
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Driven Units: Camshaft
• Surface: Smooth
• Material: Metal
• Outer Diameter [mm]: 70
• Width [mm]: 24
• Manufacturer: GATES

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Weight [kg]: 1.14
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Brake Caliper Type: Fist-type Caliper
• Fitting Position: Front Axle
• Thickness [mm]: 19.5
• Wear Warning Contact: excl. wear warning contact
• Brake System: Kelsey-Hayes
• Lisainfo: Brake pad set, front, 19.5 mm
• Additional information: Brake pad set, front, 19.5 mm

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with lever
• Test Mark: E1 90R-011043/034
• MAPP code available:
• Article number of recommended accessories: 03.0137-9008.2
• Observe dimensions:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Volkswagen
• Width [mm]: 138
• Height 1 [mm]: 49
• Height 2 [mm]: 51
• Thickness [mm]: 19
• for OE number: 425314
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 07.1983
• Transmission Type: Manual Transmission
• Fitting Position: Rear Axle
• Width [mm]: 31
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Name: LPR 00140
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Construction Year to: 10.1983
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Name: DE LS1276
• Manufacturer: DELPHI

• Brake Caliper Type: Fist-type Caliper
• for brake disc thickness [mm]: 12
• for brake disc diameter [mm]: 239
• Length [mm]: 137.8
• Width [mm]: 51.2, 49
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 19.7
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.336
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.1979
• Construction Year to: 07.1983
• Brake Caliper Type: Fist-type Caliper
• Fitting Position: Front Axle
• Width [mm]: 137.8
• Height 1 [mm]: 48.9
• Height 2 [mm]: 51.5
• Thickness [mm]: 19.7
• Brake System: Volkswagen
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

Lisainfo: Brake shoe set, without E-mark, 180x30 mm

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Manufacturer: SKF

• Brake Caliper Type: Fist-type Caliper
• for brake disc thickness [mm]: 12
• for brake disc diameter [mm]: 239
• Length [mm]: 138
• Width [mm]: 51, 49
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.336
• Supplementary Article/Info 2: with fastening material
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Caliper Type: Fist-type Caliper
• Fitting Position: Front Axle
• Thickness [mm]: 19.7
• Width [mm]: 137.8
• Height 1 [mm]: 51.2
• Height 2 [mm]: 49
• Supplementary Article/Supplementary Info: with accessories
• Brake System: VAG
• Weight [kg]: 1.22
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake System: ATE
• Supplementary Article/Supplementary Info: with lever
• Width [mm]: 31
• Inner brake drum diameter [mm]: 180
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 07.1983
• Fitting Position: Front Axle
• Brake Caliper Type: Fist-type Caliper
• Supplementary Article/Info 2: with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20887
• Number of springs: 4
• Thickness [mm]: 19.2
• Width [mm]: 137.8
• Height [mm]: 48.3
• Height 2 [mm]: 50.2
• Manufacturer Restriction: Kelsey-Hayes System
• Manufacturer: BOSCH

• Construction Year to: 07.1979
• Fitting Position: Front Axle
• Brake System: KELSEY HAYES
• Width [mm]: 138
• Height [mm]: 51.2
• Thickness [mm]: 19.5
• Width 2 [mm]: 138
• Height 2 [mm]: 48.8
• Thickness 2 [mm]: 19.5
• WVA Number: 20887, 20888
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.28
• Manufacturer: VALEO

• Construction Year to: 07.1983
• Fitting Position: Front Axle
• Brake Caliper Type: Floating Caliper
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20228
• Thickness [mm]: 15
• Width [mm]: 61.9
• Height [mm]: 56.5
• Brake System: ATE
• Manufacturer: BOSCH

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 531006310

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake Pad: with lining
• Manufacturer: BOSCH

• Construction Year from: 09.1979
• Construction Year to: 07.1983
• Brake Caliper Type: Fist-type Caliper
• Fitting Position: Front Axle
• Width [mm]: 137.8
• Height 1 [mm]: 48.9
• Height 2 [mm]: 51.5
• Thickness [mm]: 19.7
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Volkswagen
• Test Mark: E9 90R-02A1251/4447
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Brake Caliper Type: Fist-type Caliper
• Width [mm]: 138
• Thickness [mm]: 20
• Height 1 [mm]: 48
• Height 2 [mm]: 49
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Kelsey Hayes
• WVA Number: 20887, 20888
• Manufacturer: BREMBO
• Name: BR P 85 012

• Fitting Position: Front Axle
• Construction Year to: 07.1983
• Manufacturer Restriction: VAG
• Width [mm]: 137.8
• Height [mm]: 49
• Thickness [mm]: 19.7
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01024/373
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Construction Year to: 07.1983
• Manufacturer Restriction: VAG
• Test Mark: E1 90R 01195/017
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Caliper Type: Fist-type Caliper
• Width [mm]: 137.8
• Height [mm]: 50
• Thickness [mm]: 19.7
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887
• Brake System: Kelsey-Hayes
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.2
• Manufacturer: MINTEX

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth 1: 121
• Manufacturer: SNR
• Name: SN KD457.01

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 121
• Width [mm]: 18
• Length [mm]: 1,153
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.6
• Manufacturer: DAYCO
• Name: DA KTB265

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth 1: 121
• Manufacturer: SNR
• Name: SN KD457.05

• Number of Teeth 1: 121
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530016210

• Fitting Position: Front Axle
• Brake Caliper Type: Fist-type Caliper
• Width [mm]: 137.8
• Height [mm]: 50
• Thickness [mm]: 19.7
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887
• Brake System: Kelsey-Hayes
• Weight [kg]: 1.2
• Name: HE 8DB355017521
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Brake Disc Type: solid
• Manufacturer Restriction: KELSEY HAYES
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 20887, 20888
• Test Mark: E1 90R-01813/030
• Length [mm]: 137.7
• Thickness [mm]: 19.7
• Height [mm]: 48.6
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Belt Width [mm]: 18
• Colour: black
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Manufacturer: SKF
• Name: SK VKMA01000

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Manufacturer: GATES

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.64
• Number of Teeth: 121
• Width [mm]: 18
• contains more articles than the OE kit (art. no.): 056 198 119
• Manufacturer: CONTITECH

• Fitting Position: Front Axle
• Brake Caliper Type: Fist-type Caliper
• Thickness [mm]: 19.7
• Test Mark: R90 Homologated
• Width [mm]: 138
• Height [mm]: 50
• Weight [kg]: 1.4
• Height 1 [mm]: 50
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Kelsey-Hayes
• Packing Type: Box
• WVA Number: 20887
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Manufacturer: JURID

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Width [mm]: 146
• Height [mm]: 54.7
• Thickness [mm]: 19.5
• Wear Warning Contact: not prepared for wear indicator
• Test Mark: E9 90R - 01107/2852
• Article number of recommended accessories: ST1657
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear indicator
• Width [mm]: 146
• Height [mm]: 54.7
• Thickness [mm]: 19.8
• Test Mark: E9 90R-02A1062/1183
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Construction Year from: 12.1979
• Construction Year to: 07.1983
• Number of Teeth: 121
• Width [mm]: 18
• Number of belts: 1
• Weight [kg]: 0.56
• for article number: KD122
• Manufacturer: DOLZ

• Construction Year to: 07.1983
• Braking System: for vehicles with brake force regulator
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories
• Piston Diameter [mm]: 17.5
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake System: Volkswagen
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Width [mm]: 31
• Brake System: VAG
• Inner brake drum diameter [mm]: 180
• Mounting Type: Pre-assembled
• Adjustment: with manual adjustment
• Bore Ø [mm]: 14
• Manufacturer: BREMBO

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Mounting Type: Pre-assembled
• Adjustment: with automatic adjustment
• Supplementary Article/Supplementary Info: with accessories, with wheel brake cylinder
• Brake Pad: with lining
• Inner brake drum diameter [mm]: 180
• Width [mm]: 30
• Piston Diameter [mm]: 17.46
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width [mm]: 31
• Brake System: VAG
• Inner brake drum diameter [mm]: 180
• Mounting Type: Pre-assembled
• Adjustment: with manual adjustment
• Bore Ø [mm]: 17
• Name: BR K 85 010
• Manufacturer: BREMBO

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Brake System: ATE
• Mounting Type: Pre-assembled
• Adjustment: with automatic adjustment
• Supplementary Article/Supplementary Info: with accessories, with wheel brake cylinder
• Brake Pad: with lining
• Inner brake drum diameter [mm]: 180
• Width [mm]: 30
• Piston Diameter [mm]: 14.3
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Construction Year from: 08.1980
• Vehicle Identification Number (VIN) from: 17-C-630 001
• Number of Teeth 1: 121
• Width 2 [mm]: 18
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA

• Construction Year to: 07.1983
• Braking System: for vehicles with brake force regulator
• Fitting Position: Rear Axle
• Mounting Type: Pre-assembled
• Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories
• Piston Diameter [mm]: 17.5
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake System: Volkswagen
• Test Mark: E1 90R-011043/034
• MAPP code available:
• Manufacturer: ATE

• Construction Year to: 07.1983
• Braking System: for vehicles with brake force regulator
• Fitting Position: Rear Axle
• Brake System: VAG
• Brake Pad: Standard Size
• Mounting Type: Pre-assembled
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Piston Diameter [mm]: 17
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

Supplementary Article/Supplementary Info: with wheel brake cylinder, Photo corresponds to scope of supply