• Fitting Position: Rear Axle
• Height [mm]: 180
• Lisainfo: Protection sleeve for shock absorber, rear
• Additional information: Protection sleeve for shock absorber, rear

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Lisainfo: Suspension strut, complete, front
• Additional information: Suspension strut, complete, front

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Height [mm]: 160
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 221.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AXR
• Construction Year to: 06.2005
• for PR number: 1JC, UB1
• Fitting Position: Rear Axle
• Material: PP (Polypropylene)
• Height [mm]: 179
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: UB9, UC2, UC4
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: AXR
• Vehicle Identification Number (VIN) to: ******1Y*6*300000
• Suspension: for vehicles with sports suspension
• for PR number: 1JC, UB1
• Block Separation:
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Manufacturer: FEBI BILSTEIN
• Additional information: F22142
• Lisainfo: F22142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AXR
• Vehicle Identification Number (VIN) to: ******1Y*6*300000
• Suspension: for vehicles with sports suspension
• for PR number: 1JC, UB1
• Block Separation:
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Name: SW 30 92 2142
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Name: SW 30 60 0038
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0513425
• Fitting Position: Rear Axle
• Height [mm]: 162
• Required quantity: 2
• Material: Thermoplast
• Weight [g]: 57
• Diameter 1 [mm]: 36
• Diameter 2 [mm]: 56
• Name: IM 37265
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Manufacturer: BORSEHUNG

• for OE number: 1J0513425A
• Fitting Position: Rear Axle
• Height [mm]: 180
• Required quantity: 2
• Material: Thermoplast
• Weight [g]: 58
• Diameter 1 [mm]: 37
• Diameter 2 [mm]: 56
• Name: IM 37372
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Fabrication Number: AB-MZ-034
• Name: NTY AB-MZ-034
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Weight [kg]: 0.183
• Packaging length [cm]: 27.4
• Packaging width [cm]: 5.6
• Packaging height [cm]: 5.6
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0132
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA
• Lisainfo: MA-00034
• Additional information: MA-00034

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Name: CFD 564778
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV KOM.
(kvaliteediklass: PJ)"

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length 1 [mm]: 648
• Length 2 [mm]: 400
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH
• Name: GH 309915

• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Thread Size: M10x1,0
• Length 1 [mm]: 637
• Length 2 [mm]: 411
• Piston Rod Diameter [mm]: 12
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH
• Name: GH 339915

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• not for country specific design: USA, Mexico
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Ø [mm]: 25
• Length 1 [mm]: 418
• Length 2 [mm]: 655
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK118, PK078
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE
• Additional information: 23890 MONROE
• Lisainfo: 23890 MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 454710
• Manufacturer: DACO

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Model Year from: 2006
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Suspension: for vehicles with bad road version, for vehicles with standard suspension Lisainfo: "Tootja: SRL
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Spring-bearing Damper
• Manufacturer: KAYABA

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• not for country specific design: USA, Mexico
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Ø [mm]: 25
• Length 1 [mm]: 448
• Length 2 [mm]: 668
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK118, PK078
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-029429
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
S.OCTAVIA/VW GOLF IV
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Parameter: SEOV26X187A
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
AUDI A3/GOLF IV/OCTA
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-364708, GH-364709, GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-045744
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with bad road version Lisainfo: "Tootja: BILSTEIN
A3/GOLF IV/OCTAVIA
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KAYABA

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI A3, 97-
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Length 1 [mm]: 648
• Length 2 [mm]: 400
• Manufacturer: KAYABA

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 3.8
• Bore Ø [mm]: 32
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK077, PK076
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Model Year from: 2006
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Oil Pressure
• Parameter: SF32/22X178A
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
AUDI A3/VW GOLF IV
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A3/VW GOLF IV
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-140032

Additional information: "Tootja: BILSTEIN
AUDA A3 WZM. 96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDA A3 WZM. 96-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Model Year to: 2005
• Check OE number:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Parameter: SFE30/22X179A
• reinforced version:
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Name: MM 4303G
• Manufacturer: MAGNETI MARELLI

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-045751
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI A3/VW GOLF IV
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA

• Shock Absorber System: Single Tube Upside Down, Monotube
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: BILSTEIN
• Name: BI 24-026239
• Quality class: Q

Additional information: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"

• Shock Absorber System: Twin-Tube, Single Tube Upside Down, Monotube
• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: BILSTEIN
• Name: BI 24-026246
• Quality class: Q

Additional information: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-046370
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)"

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-046387
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)"