• Rakendustüüp: elektriline
• Sõidukivarustus: sõidukitele ilma ksenoontuleta
• Versioon: AL/BOSCH/MAGNETI MA.
• Manufacturer: JP GROUP
• Lisainfo: Motor for headlamp levelling
• Additional information: Motor for headlamp levelling

• Rakendustüüp: elektriline
• Sõidukivarustus: sõidukitele ilma ksenoontuleta
• Lisainfo: Motor for headlamp levelling
• Additional information: Motor for headlamp levelling

• Construction Year from: 05.2008
• Installatsiooni pool: Esisild
• Anduritüüp: Hebelgeber
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Manufacturer: JP GROUP
• Lisainfo: Sensor, Xenon light (headlight range adjustment)
• Additional information: Sensor, Xenon light (headlight range adjustment)

• Width [mm]: 67
• Height [mm]: 60
• Operating Mode: Electric
• Fabrication Number: ECX-AU-004
• Manufacturer: NTY
• Name: NTY ECX-AU-004

• Styling: for dual headlight
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for PR number: 8BG
• Manufacturer Restriction: AL
• Installatsiooni pool: kahepoolne
• Rakendustüüp: elektriline
• Pistikkontaktide arv: 3
• Korpuse materjal: Plastik
• Manufacturer: TOPRAN

Sõidukivarustus: sõidukitele ilma ksenoontuleta, tulekaugusregulaatoriga sõidukitele Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer Restriction: Valeo, VISTEON
• Installatsiooni pool: Esitulele, kahepoolne
• Rakendustüüp: elektriline
• Pistikkontaktide arv: 3
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass)
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele (mehaaniline)
• Montaaživiis: Bajonett
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Electric
• Voltage [V]: 12
• Fabrication Number: ECX-PL-002
• Manufacturer: NTY
• Name: NTY ECX-PL-002

• Operating Mode: Electric
• Fabrication Number: ECX-AU-006
• Manufacturer: NTY
• Name: NTY ECX-AU-006

• Styling: for dual headlight
• for PR number: 8BG, 8BK
• Manufacturer Restriction: HELLA
• Installatsiooni pool: kahepoolne
• Rakendustüüp: elektriline
• Pistikkontaktide arv: 3
• Materjal: Polyamid 6
• Korpuse materjal: Plastik
• Manufacturer: TOPRAN HANS PRIES

Sõidukivarustus: tulekaugusregulaatoriga sõidukitele, sõidukitele ilma ksenoontuleta Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer Restriction: AL
• Light Design: Halogen
• Operating Mode: Electric
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV936

• Rakendustüüp: elektriline
• Nominaalpinge (V): 12
• Lisainfo: Control, headlight range adjustment
• Additional information: Control, headlight range adjustment

• Manufacturer Restriction: VISTEON
• Light Design: Halogen
• Operating Mode: Electric
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV935

• Operating Mode: Electric
• Manufacturer Restriction: HELLA
• Vehicle Equipment: for vehicles without xenon light
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV946

• Operating Mode: Electric
• Manufacturer Restriction: HELLA
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Version: AL-system
• Rakendustüüp: elektriline
• Manufacturer: TYC

• Operating Mode: Electric
• Fitting Position: Left, Right
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Vehicle Equipment: for vehicles with Xenon light
• Rakendustüüp: elektriline
• Manufacturer: TYC
• Additional information: 20-11257-MA-1
• Lisainfo: 20-11257-MA-1

• Light Design: Halogen
• Manufacturer Restriction: AL
• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 250
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Light Design: Halogen
• Manufacturer Restriction: BOSCH, System BOSCH
• Operating Mode: Electric
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Rakendustüüp: elektriline
• Versioon: H-System
• Manufacturer: TYC

• Version: VIST-system
• Rakendustüüp: elektriline
• Manufacturer: TYC

• Tootja piirang: VAG
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 200
• Kaabli ristlõige [mm²]: 0,75
• Kokkupuutepind: kullatud
• Asetuslaius (mm): 1,6
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihendiga
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Name: Headlamp adjustment motor
• Quality class: PJ

Lisainfo: "Tootja: TYC
VW BORA, 11.98-
(kvaliteediklass: PJ)"

• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 250
• Kaabli ristlõige alates [mm²]: 0,5
• Kaabli ristlõige kuni [mm²]: 0,5
• Piirangutega toode/piirangu info: termokahaneva jooteühendusega
• OE-numbri jaoks: 242140116
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info: ilma kinnituseta
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• OE-numbri jaoks: 1T0907503B
• Pistikkontaktide arv: 4
• Installatsiooni pool: taga
• Manufacturer: KAMOKA

• Pistikkontaktide arv: 4
• Installatsiooni pool: ees
• Manufacturer: KAMOKA

• Installatsiooni pool: ees, paremal
• Manufacturer: KAMOKA

• Version: AL-system
• Rakendustüüp: elektriline
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Front Axle
• Production date to: 26.05.2008
• Block Separation:
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Korpusevärv: must
• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Anduritüüp: Hebelgeber
• Piirangutega toode/piirangu info: koos hoidjaga
• Piirangutega toode/piirangu info 2: ilma otsavardata
• Manufacturer: TOPRAN

Korpuse materjal: Polyamid 6.6, GFK (klaaskiuga tugevdatud plastmass) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: Headlamp adjustment motor
• Quality class: Q

Lisainfo: "Tootja: HELLA
VW GOLF IV, 97-
(kvaliteediklass: Q)"

• Number of pins: 4
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with headlight levelling
• Fabrication Number: ECX-VW-001
• Manufacturer: NTY
• Name: NTY ECX-VW-001

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV372

• Installatsiooni pool: taga
• Manufacturer: KAMOKA

• Pistikkontaktide arv: 4
• Installatsiooni pool: ees
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Required quantity: 1
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with coupling rod, with holding frame
• Fabrication Number: ECX-VW-008
• Manufacturer: NTY
• Name: NTY ECX-VW-008

• Number of pins: 4
• Fabrication Number: ECX-VW-009
• Manufacturer: NTY
• Name: NTY ECX-VW-009

• Supplementary Article/Supplementary Info: with holder
• Fitting Position: Rear Axle
• Number of pins: 4
• Vehicle Equipment: for vehicles with headlight levelling
• Fabrication Number: ECX-VW-001A
• Manufacturer: NTY
• Name: NTY ECX-VW-001A

• Fitting Position: Front Axle
• Number of pins: 4
• Supplementary Article/Supplementary Info: with holder
• Vehicle Equipment: for vehicles with headlight levelling
• Fabrication Number: ECX-VW-007
• Manufacturer: NTY
• Name: NTY ECX-VW-007

• Construction Year from: 05.2008
• Installatsiooni pool: Esisild
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Piirangutega toode/piirangu info: koos hoidjaga
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos stabilisaatori otsavardaga
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Installatsiooni pool: Tagasild
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Piirangutega toode/piirangu info: koos hoidjaga
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos stabilisaatori otsavardaga
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Front Axle
• Fabrication Number: ECX-AU-020
• Manufacturer: NTY
• Name: NTY ECX-AU-020

• Installatsiooni pool: ees
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Drive Type: Front-Wheel Drive
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Installatsiooni pool: vasakul, paremal
• Rakendustüüp: elektriline
• Name: SEADEELEMENT,TULEDE KORGUSE REGUL.
• Manufacturer: VAL

• Installatsiooni pool: vasakul, paremal
• Name: REGULAATOR,TULEDE KORGUSE REG.
• Manufacturer: MAG

• Number of pins: 4
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Version: AL-system
• Laius (mm): 66,6
• Kõrgus (mm): 60
• Rakendustüüp: elektriline
• valikuliselt:
• Sügavus (mm): 30
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.29
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV438

• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV371
• Manufacturer: ESEN SKV

• Production date to: 26.05.2008
• Fitting Position: Front Axle
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV465

Supplementary Article/Info 2: with coupling rod, with holder, alternator regulator

• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• for OE number: 1K0941273L
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with Xenon light
• Rakendustüüp: elektriline
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• General Information: Height level sensor; front
• Manufacturer: VIKA

• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

Vehicle Equipment: for vehicles with Xenon light, for vehicles with headlight levelling (automatic) General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Production date to: 26.05.2008
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6.6
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Production date from: 27.05.2008
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Installatsiooni pool: Esisild, paigaldatud ainult ühel pool
• Korpusevärv: must
• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Korpuse materjal: Plastik, GFK (klaaskiuga tugevdatud plastmass)
• Anduritüüp: Hebelgeber
• Piirangutega toode/piirangu info: koos hoidjaga, ühendusega
• Piirangutega toode/piirangu info 2: koos stabilisaatori otsavardaga
• Montaaživiis: ettemonteeritud
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: Headlamp adjustment motor
• Quality class: Q

Lisainfo: "Tootja: VALEO
VW GOLF IV, 97-
(kvaliteediklass: Q)"

• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• for OE number: 1K0 941 273 L
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Installatsiooni pool: Tagasild
• Korpusevärv: must
• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Anduritüüp: Hebelgeber
• Veoülekande liik: Esivedu
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass)
• Piirangutega toode/piirangu info: koos hoidjaga, ühendusega
• Piirangutega toode/piirangu info 2: koos stabilisaatori otsavardaga
• Montaaživiis: ettemonteeritud
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date to: 26.05.2008
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Installatsiooni pool: Esisild
• Korpusevärv: must
• Pistikkontaktide arv: 4
• Pistikukatte kuju: D-kuju
• Anduritüüp: Hebelgeber
• Piirangutega toode/piirangu info: koos hoidjaga, ühendusega
• Piirangutega toode/piirangu info 2: koos stabilisaatori otsavardaga
• Montaaživiis: ettemonteeritud
• Manufacturer: TOPRAN

Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass), Polyamid 6.6 Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• for OE number: 1K0941274C
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• General Information: Height level sensor; front
• Manufacturer: VIKA

• Fitting Position: Rear
• General Information: Height level sensor; rear
• Manufacturer: VIKA

• Construction Year to: 05.2008
• Fitting Position: Front Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV369

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front
• General Information: Height level sensor; front
• Manufacturer: VIKA

• Fitting Position: Rear
• General Information: Height level sensor; rear
• Manufacturer: VIKA

• Fitting Position: Left Rear
• Number of connectors: 4
• Manufacturer: ERA

• Production date from: 26.05.2008
• for PR number: 8Q3
• Installatsiooni pool: Esisild
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Piirangutega toode/piirangu info: koos hoidjaga
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos stabilisaatori otsavardaga
• Pistikukatte kuju: D-kuju
• Manufacturer: VEMO GERMANY

Üldine informatsioon: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.