Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)



-
Supplementary Article/Info 2: with wheel hub,
with integrated ABS sensor -
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
VW- 018 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.



- Supplementary Article/Info 2: with wheel hub
-
Fabrication Number: KLP-
VW- 022 -
Article number of recommended accessories: KLP-
VW- 022- Z - Manufacturer: NTY
-
Name: NTY KLP-
VW- 022
Fitting Position: Front Axle, Front Axle Left, Front Axle Right, Rear Axle
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




-
for PR number: 1ZC,
1ZF -
Installatsiooni pool: esisild vasakul,
esisild paremal - Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga
- Veljeaukude hulk: 5
-
Lisainfo: Wheel hub for disc brake,
front, 85 mm -
Additional information: Wheel hub for disc brake,
front, 85 mm





























































- Material: Metal
-
Surface: Zinc-
coated - Name: GH 399961
-
Manufacturer: AUTO-
GH
Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower Front Axle



- Length [mm]: 70
-
External Thread [mm]: M16 x 1,
5 - Bolt Head-/Nut Design: Female Star
- Quality/ Grade: 10.9
- Fitting Position: Rear Axle both sides
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.


- Installatsiooni pool: Tagasild
- Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
- Laagriteostus: Kuullaager
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 137
- Veljeaukude hulk: 5
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX



- Inner Diameter [mm]: 30
- Supplementary Article/Info 2: with wheel hub
-
Fabrication Number: KLT-
VW- 013 - Manufacturer: NTY
-
Name: NTY KLT-
VW- 013
Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Fitting Position: Rear Axle
-
for PR number: 0FG,
1KD - Flange Diameter [mm]: 136.9
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Rim Hole Number: 5
- Manufacturer: DENCKERMANN ZAWIESZENIE






- Construction Year to: 02.2007
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 136.5
- Braking/Driving Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 2.23
- Number of Holes: 5
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV011



- Installatsiooni pool: Tagasild
- Veljeaukude hulk: 5
- Siseläbimõõt [mm]: 30
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Välisläbimõõt [mm]: 136
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX


- Fitting Position: Rear Axle
-
for PR number: 0FA,
0FC, 0FG, 0FV, 1KD, 1KE, 1KV, 1KY, 1KZ - Flange Diameter [mm]: 136.5
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 68
- Inner Diameter [mm]: 30
- Rim Hole Number: 5
- Manufacturer: DENCKERMANN ZAWIESZENIE


-
Vehicle Identification Number (VIN) from: 1K-
6- 240 001, 1K- 6- 000 001 -
for PR number: 1KD,
0FG - Installatsiooni pool: Tagasild
- Siseläbimõõt [mm]: 32
- Manufacturer: DELLO AUTOMEGA






- Construction Year to: 02.2007
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136.5
- Braking/Driving Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 2.53
- Number of Holes: 5
- Always compare old and new part (in particular OE No.):
- Name: CE 29SKV006
- Manufacturer: ESEN SKV


- Fitting Position: Rear Axle
-
for PR number: 0FG,
1KD - Rim Hole Number: 5
- Flange Diameter [mm]: 136.9
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub


- Fitting Position: Rear Axle
-
for PR number: 0FA,
0FC, 0FG, 0FV, 1KD, 1KE, 1KV, 1KY, 1KZ - Rim Hole Number: 5
- Inner Diameter [mm]: 30
- Flange Diameter [mm]: 136.5
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub


- Bolt Length [mm]: 59
- Fitting Position: Rear Axle
-
Välisläbimõõt 2 [mm]: 136,
9 - Kinnitusaukude hulk: 5
- Manufacturer: METELLI LOZYSKA KOLA PIASTY


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 32
-
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Siseläbimõõt 2 (mm): 32
- Manufacturer: GSP



- Fitting Position: Rear Axle
- Width [mm]: 67.8
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 136.5
- Manufacturer: JPN
-
Lisainfo: 20L9013-
JPN -
Additional information: 20L9013-
JPN








- Fitting Position: Front Axle
- for brake disc diameter [mm]: 288
- Laius (mm): 83
- Siseläbimõõt [mm]: 29
-
Välisläbimõõt [mm]: 136,
5 - Laius 2 (mm): 48
- Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
- Välisläbimõõt 2 [mm]: 81
- Siseläbimõõt 2 (mm): 51
- Kinnitusaukude hulk: 4
- Name: Rattalaagrikomplekt
- Manufacturer: OPT
- Additional information: 101017
- Lisainfo: 101017


- Fitting Position: Rear Axle
- Laius (mm): 69
- Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 136
- Manufacturer: DELLO AUTOMEGA





- Installatsiooni pool: Tagasild
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY



- Installatsiooni pool: Esisild
- Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Välisläbimõõt [mm]: 137
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX




-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga
- Veljeaukude hulk: 5
-
Manufacturer: JP-
GROUP -
Lisainfo: Wheel hub with bearing,
rear -
Additional information: Wheel hub with bearing,
rear


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 30
-
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Siseläbimõõt 2 (mm): 30
- Manufacturer: GSP
- Additional information: 9230082
- Lisainfo: 9230082


-
Vehicle Identification Number (VIN) from: 1K-
4P025001 - Block Separation:
-
for PR number: 1KE,
1KV, 1KY, 1KZ, 0FA, 0FC, 0FG, 0FV, 1KD -
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Hulk telje kohta: 2
- Veljeaukude hulk: 5
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 30
- Manufacturer: TOPRAN
Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos rasvakattega, koos kruviga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.




- Piirangutega toode/piirangu info 2: koos rattalaagriga
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Manufacturer: JP GROUP
- Lisainfo: Wheel Hub
- Additional information: Wheel Hub



- Fitting Position: Rear Axle
- Width [mm]: 67.7
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136.5
- Manufacturer: JPN


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 32
- Versioon: One
-
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Siseläbimõõt 2 (mm): 32
- Manufacturer: GSP





- Installatsiooni pool: Tagasild
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Siseläbimõõt 1 [mm]: 32
- Manufacturer: KAMOKA


-
Vehicle Identification Number (VIN) to: 1K-
5- 600000 -
for PR number: 1LK,
1ZD, 1ZE, 1ZM, 1ZP -
Fitting Position: Front Axle Left,
Front Axle Right -
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Manufacturer: GSP


- Fitting Position: Rear Axle
- Required quantity: 2
-
for PR number: 0FG,
1KD - Rim Hole Number: 5
- Manufacturer: DRIVE



- Installatsiooni pool: Esisild
- Kinnitusaukude hulk: 3
- Välisläbimõõt [mm]: 136
- Välisläbimõõt 1 [mm]: 80
- Välisläbimõõt 2 [mm]: 65
- Laius 2 (mm): 48
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX


- Fitting Position: Front Axle
-
for PR number: 1LJ,
1LK, 1ZD, 1ZE, 1ZM, 1ZP - Flange Diameter [mm]: 137
- Supplementary Article/Info 2: with integrated ABS sensor
- Rim Hole Number: 5
- Manufacturer: DENCKERMANN FILTRY


- Quantity: 2
- Fitting Position: Rear Axle
- Number of Holes: 5
- Weight [kg]: 2.2
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 68.5
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 136
- Bearing Type: Angular Ball Bearing
- General Information: Wheel bearing assembly; rear
- Manufacturer: VIKA


- Fitting Position: Front Axle
-
for PR number: 1LJ,
1LK, 1ZD, 1ZE, 1ZM, 1ZP - Rim Hole Number: 5
- Flange Diameter [mm]: 137
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub







- Fitting Position: Rear Axle
- Laius (mm): 69
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 137
- Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT
- Additional information: 102019A
- Lisainfo: 102019A

- Name: Wheel hub
- Quality class: PJ
Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"Tagaratta laager.


- Installatsiooni pool: Tagasild
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 137
- Ava Ø (mm): 112
- Hammastehulk ABS-rõngas: 86
- Veljeaukude hulk: 5
- Laagriteostus: Kuullaager
- Name: RATTARUMM
- Manufacturer: MEY
Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos integreeritud magnetilise anduriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.


- Fitting Position: Rear Axle
-
Laius (mm): 68,
2 - Siseläbimõõt [mm]: 30
-
Välisläbimõõt [mm]: 136,
5 -
Netokaal [kg]: 2,
27 - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK


- Quantity: 2
- Fitting Position: Rear Axle
- Number of Holes: 5
- Weight [kg]: 2.366
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bearing Type: Angular Ball Bearing
- General Information: Wheel bearing assembly; rear
- Manufacturer: VIKA


- Fitting Position: Rear Axle
- Required quantity: 2
-
for PR number: 1KE,
1KV, 1KD, 1KZ, 1KY, 0FV, 0FA, 0FC, 0FG - Rim Hole Number: 5
- Manufacturer: DRIVE






- Construction Year to: 02.2007
- Fitting Position: Front Axle
- Inner Diameter [mm]: 36
- Outer Diameter [mm]: 136.5
- Braking/Driving Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 3.72
- Number of Holes: 5
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 30
-
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
- Siseläbimõõt 2 (mm): 30
- Manufacturer: GSP
Piirangutega toode/piirangu info 2: koos kruvidega, koos integreeritud ABS-anduriga, koos kattega



- Fitting Position: Front Axle
- for PR number: 1ZF
- Flange Diameter [mm]: 136
-
Supplementary Article/Info 2: with integrated ABS sensor,
with bolts/ screws - Outer Diameter 1 [mm]: 80
- Rim Hole Number: 5
- Manufacturer: DENCKERMANN ZAWIESZENIE






- Construction Year to: 02.2007
- Fitting Position: Front Axle
- Inner Diameter [mm]: 36
- Outer Diameter [mm]: 136.5
- Braking/Driving Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 3.39
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 112
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV040


- Fitting Position: Rear Axle
-
Kaal (kg): 2,
425 - pakendi pikkus [cm]: 16
- pakendi laius [cm]: 16
- pakendi kõrgus [cm]: 11
-
Välisläbimõõt [mm]: 136,
5 - Siseläbimõõt [mm]: 32
-
Laius (mm): 67,
7 -
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: REAR LR+RE LR+RE
- for OE number: 8V0598611A
- Siseläbimõõt [mm]: 30
- Laius 1 (mm): 68
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Kinnitusaukude hulk: 5
- Name: DA KWD1002
- Manufacturer: DAYCO


-
Vehicle Identification Number (VIN) to: 1K-
5- 600000 -
for PR number: 1LK,
1ZD, 1ZE, 1ZM, 1ZP -
Fitting Position: Front Axle Left,
Front Axle Right - Versioon: One
-
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
- OE-numbri jaoks: 1K0407621C
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Manufacturer: GSP







- Fitting Position: Rear Axle
-
Laius (mm): 68,
2 - Siseläbimõõt [mm]: 30
-
Välisläbimõõt [mm]: 136,
5 - Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
- Väändejõud [Nm]: 180
- Pöördenurk [°]: 180
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT


- Fitting Position: Front Axle
- for PR number: 1ZF
- Flange Diameter [mm]: 136
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 80
- Rim Hole Number: 5
- Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL



- Fitting Position: Rear Axle
- Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
-
Välisläbimõõt [mm]: 136,
5 - Siseläbimõõt [mm]: 32
-
Laius (mm): 67,
7 - SVHC: SVHS aineid ei esine
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG


-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: REAR LR+RE LR+RE
- for OE number: 3G0598611A
- Siseläbimõõt [mm]: 32
- Laius 1 (mm): 70
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Kinnitusaukude hulk: 5
- Name: DA KWD1005
- Manufacturer: DAYCO


-
Fitting Position: Right,
Left, Rear Axle - Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kummlaagriga
- Siseläbimõõt 1 [mm]: 32
- Välisläbimõõt 1 [mm]: 136
- Laius 1 (mm): 69
- Pöördenurk [°]: 180
- Väändejõud [Nm]: 200
- Manufacturer: SNR
- Name: SN R154.54



- Laius (mm): 70
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Aukude arv: 5
- Laagriteostus: kuullaager
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Kaal (kg): 2,
366 -
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Hooldusinfot jälgida:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 23320 FEBI
- Additional information: 23320 FEBI
Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.





- Installatsiooni pool: Esisild
- OE-numbri jaoks: 1T0 498 621 SK
- Välisläbimõõt [mm]: 136
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY





- Fitting Position: Front Axle
- OE-numbri jaoks: 1T0498621
- Manufacturer: DELLO AUTOMEGA


- Installatsiooni pool: Tagasild
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Veljeaukude hulk: 5
- Laagriteostus: Kuullaager
- Name: RATTARUMM
- Manufacturer: MEY
Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos integreeritud magnetilise anduriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.




- Fitting Position: Front Axle
- OE-numbri jaoks: 1K0498621
- Manufacturer: DELLO AUTOMEGA








- Fitting Position: Rear Axle
- Laius (mm): 68
- Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 137
- Manufacturer: OPTIMAL









































- Fitting Position: Rear Axle
- Required quantity: 2
-
for PR number: 0FG,
1KD - Laius (mm): 69
- Siseläbimõõt [mm]: 32
-
Ääriku läbimõõt [mm]: 136,
9 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF





- Installatsiooni pool: Esisild
- OE-numbri jaoks: 1K0498621
- Välisläbimõõt [mm]: 136
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY


-
Fitting Position: Front Axle Left,
Front Axle Right -
Vehicle Identification Number (VIN) from: 1K-
5B162041, 1K- 5P108282, 1K- 5U027668, 1K- 5W572545 -
for PR number: 1ZC,
1ZF - Block Separation:
- Veljeaukude hulk: 5
- Hulk telje kohta: 2
- Flantsiühenduste arv: 3
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Ava Ø (mm): 112
- Manufacturer: TOPRAN
Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos kruvidega, koos integreeritud magnetilise anduriga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Fitting Position: Front Axle
- Required quantity: 2
-
for PR number: 1ZE,
1ZM, 1ZP, 1LJ, 1ZD, 1LK - Rim Hole Number: 5
- Manufacturer: DRIVE


-
Equipment Code: 1ZC,
1ZF -
Vehicle type: 1ZC,
1ZF -
Fitting Position: Front Axle Left,
Front Axle Right -
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
- OE-numbri jaoks: 1K0407621D
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Hammastehulk: 36
- Manufacturer: GSP


- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Wheel bearing assembly; rear; with dust cover
- Manufacturer: BORSEHUNG


- Fitting Position: Front Axle
- Required quantity: 2
- for PR number: 1ZF
- Rim Hole Number: 5
- Manufacturer: DRIVE



- Aukude arv: 5
- Välisläbimõõt [mm]: 137
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga -
Laius (mm): 69,
70 - Siseläbimõõt [mm]: 32
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Installatsiooni pool: Tagasild
- Manufacturer: VAICO
Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos rattalaagriga Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Fitting Position: Front Axle
- for PR number: 1ZF
- Laius (mm): 84
-
Siseläbimõõt [mm]: 27,
4 - Välisläbimõõt [mm]: 80
-
Ääriku läbimõõt [mm]: 136,
5 - Kinnitusaukude vahe (mm): 112
-
Piirangutega toode/piirangu info 2: koos ABS-
andurirõngaga -
Netokaal [kg]: 3,
25 - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK



- Laius (mm): 70
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Aukude arv: 5
- Laagriteostus: kuullaager
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Kaal (kg): 2,
366 -
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Hooldusinfot jälgida:
- Name: SW 32 92 3320
- Manufacturer: SWAG
Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Number of mounting bores: 3
- Outer Diameter [mm]: 136
- Inner Diameter [mm]: 30
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
Supplementary Article/Info 2: with integrated magnetic sensor ring, with fastening material, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.


-
Equipment Code: 1ZC,
1ZF -
Vehicle type: 1ZC,
1ZF -
Fitting Position: Front Axle Left,
Front Axle Right -
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
- OE-numbri jaoks: 1K0407621D
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos kruvidega,
koos integreeritud ABS- anduriga - Hammastehulk: 36
- Manufacturer: GSP
- Additional information: 9336004K
- Lisainfo: 9336004K




- Outer Diameter [mm]: 136
- Inner Diameter [mm]: 32
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.


-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: FRRE LR+FR LR+FR
- for OE number: 5K0498621
- Siseläbimõõt [mm]: 29
- Laius 1 (mm): 67
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Kinnitusaukude hulk: 5
- Name: DA KWD1001
- Manufacturer: DAYCO


- Fitting Position: Front
- Manufacturer: VIKA
General Information: Wheel bearing assembly; front; 4 holes; with screws


-
Vehicle type: 1ZC,
1ZF -
Fitting Position: Front Axle Left,
Front Axle Right - Versioon: Three
-
Keermemõõt: M14X1,
5 - Hammastehulk ABS-rõngas: 86
- OE-numbri jaoks: 1K0407621D
-
Välisläbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Hammastehulk: 36
- Manufacturer: GSP


- Fitting Position: Rear
- Supplementary Article/Info 2: with bolts
- General Information: Wheel bearing assembly; rear; with screws
- Manufacturer: BORSEHUNG



- Fitting Position: Front Axle
- not for PR number: 1ZF
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga -
Siseläbimõõt [mm]: 27,
5 - Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Veljeaukude hulk: 5
- Kinnitusviis: Neljapunktikinnitus
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Hammastehulk: 36
- Laagriteostus: Kuullaager
- Name: RATTARUMM
- Manufacturer: MEY
Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos integreeritud magnetilise anduriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.


- Fitting Position: Front Axle
- for PR number: 1ZF
- Rim Hole Number: 5
- Flange Diameter [mm]: 136
- Outer Diameter 1 [mm]: 80
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub


- Fitting Position: Rear Axle
- Required quantity: 2
-
for PR number: 0FA,
0FC, 0FG, 0FV, 1KD, 1KE, 1KV, 1KY, 1KZ -
Kaal (kg): 2,
258 -
pakendi pikkus [cm]: 15,
6 -
pakendi laius [cm]: 15,
4 -
pakendi kõrgus [cm]: 10,
5 -
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga -
Välisläbimõõt [mm]: 136,
5 - Siseläbimõõt [mm]: 30
- Laius (mm): 68
- Veljeaukude hulk: 5
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ



- Fitting Position: Front Axle
- Outer Diameter [mm]: 136.4
- Width 2 [mm]: 48.1
- Outer Diameter 1 [mm]: 80
- Outer Diameter 2 [mm]: 65
- Number of mounting bores: 3
- Manufacturer: JPN


-
Vehicle Identification Number (VIN): [8P-
4- 162 001;] - Siseläbimõõt 1 [mm]: 30
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kummlaagriga
- Pistikkontaktide arv: 43
- Pöördenurk [°]: 180
- Väändejõud [Nm]: 180
-
Installatsiooni pool: Tagasild paremal,
Tagasild vasakul - Manufacturer: SNR
- Name: SN R154.55


- Fitting Position: Rear Axle
- Laius (mm): 69
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 137
- Kinnitusaukude vahe (mm): 112
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga -
Netokaal [kg]: 2,
44 - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK


- Fitting Position: Rear
- General Information: Wheel bearing assembly; rear
- Manufacturer: BORSEHUNG









































- Fitting Position: Rear Axle
- Required quantity: 2
-
for PR number: 1KE,
1KD, 0FC, 0FG, 1KV, 1KY, 1KZ, 0FV, 0FA - Laius (mm): 68
- Siseläbimõõt [mm]: 30
-
Ääriku läbimõõt [mm]: 136,
5 - Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Lisainfo: VKBA 3656 SKF
- Additional information: VKBA 3656 SKF


- for PR number: 1ZF
- Kinnitusaukude hulk: 3
- Laius (mm): 85
- Siseläbimõõt [mm]: 27
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Aukude arv: 5
- Laagriteostus: kuullaager
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
365 - OE-numbri jaoks: 1K0 407 621 E SK
- Manufacturer: FEBI BILSTEIN JR.
Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Fitting Position: Rear Axle
- Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
-
Välisläbimõõt [mm]: 136,
5 - Siseläbimõõt [mm]: 30
-
Laius (mm): 67,
8 - SVHC: SVHS aineid ei esine
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG


- Fitting Position: Front Axle
- Required quantity: 2
-
for PR number: 1LJ,
1LK, 1ZD, 1ZE, 1ZM, 1ZP -
Kaal (kg): 3,
913 - pakendi pikkus [cm]: 16
- pakendi laius [cm]: 16
- pakendi kõrgus [cm]: 11
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Välisläbimõõt [mm]: 137
- Veljeaukude hulk: 5
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ



-
Fitting Position: Front Axle Left,
Front Axle Right - Width [mm]: 55
- Manufacturer: FAST


- Aukudearv 2: 4
- Aukudearv 1: 5
- Piirangutega toode/piirangu info 2: koos kummlaagriga
- Laius 1 (mm): 84
- Välisläbimõõt 1 [mm]: 136
- Pistikkontaktide arv: 43
- Pöördenurk [°]: 180
- Väändejõud [Nm]: 200
-
Installatsiooni pool: Tagasild,
Esisild - Manufacturer: SNR
- Name: SN R154.56
Vehicle Identification Number (VIN): [;1K-5-600000], [;1K-7W082500], [;5P-5-165000], [;8P-5A200 000], [;8P-5B050 000]








- Fitting Position: Front Axle
- for brake disc diameter [mm]: 280
- Laius (mm): 83
- Siseläbimõõt [mm]: 29
-
Välisläbimõõt [mm]: 136,
5, 80 - Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
- Kinnitusaukude hulk: 3
- Hammastehulk sisend: 36
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT


-
Fitting Position: Front Axle Left,
Front Axle Right -
not for PR number: 1ZC,
1ZF - Veljeaukude hulk: 5
- Hulk telje kohta: 2
- Flantsiühenduste arv: 4
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Ava Ø (mm): 112
- Manufacturer: TOPRAN
Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos kruvidega, koos integreeritud magnetilise anduriga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- for PR number: 1ZF
- Kinnitusaukude hulk: 3
- Laius (mm): 85
- Siseläbimõõt [mm]: 27
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Aukude arv: 5
- Laagriteostus: kuullaager
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
765 - OE-numbri jaoks: 5K0 498 621 A
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Quantity: 2
-
Vehicle Identification Number (VIN) from: 1K-
6- 500 001 - Fitting Position: Front Axle
- Number of Holes: 3
- Weight [kg]: 0.765
- Supplementary Article/Info 2: without bolts
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 80
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 136
- Bearing Type: Angular Ball Bearing
- General Information: Wheel bearing assembly; front; without bolts
- Manufacturer: VIKA


-
for PR number: 1ZC,
1ZF - Installatsiooni pool: Esisild
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Siseläbimõõt [mm]: 27
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Hammastehulk ABS-rõngas: 96
- Veljeaukude hulk: 5
- Kinnitusviis: Kolmepunktikinnitus
- Hammastehulk: 36
- Laagriteostus: Kuullaager
- Name: RATTARUMM
- Manufacturer: MEY
Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos integreeritud rattalaagriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.





























- Fitting Position: Front Axle
- Required quantity: 2
- for PR number: 1ZF
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 80
- Outer Diameter 2 [mm]: 136
- Manufacturer: KAVO













































- Fitting Position: Front Axle
- Required quantity: 2
-
for PR number: 1ZD,
1ZE, 1ZM, 1LK, 1LJ, 1ZP -
Technical Information: Knuckle,
number of holes 4 - Ääriku läbimõõt [mm]: 137
- Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Lisainfo: VKBA 3643 SKF
- Additional information: VKBA 3643 SKF



- Fitting Position: Rear Axle
- Inner Diameter [mm]: 32
- Always compare old and new part (in particular OE No.):
- Manufacturer Restriction: Durchmesser beachten
- Outer Diameter [mm]: 137
- Width [mm]: 69.5
- Manufacturer: METZGER
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring


- Fitting Position: Front Axle
-
not for PR number: 1ZC,
1ZF - Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
-
Välisläbimõõt [mm]: 136,
5 - Välisläbimõõt 2 [mm]: 65
- Välisläbimõõt 1 [mm]: 85
- Laius 2 (mm): 48
- Kinnitusaukude hulk: 4
- SVHC: SVHS aineid ei esine
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
- Lisainfo: 713 6106 10 FAG
- Additional information: 713 6106 10 FAG




- Fitting Position: Rear Axle
- Width [mm]: 80
- Manufacturer: FAST


- Fitting Position: Front Axle
- for PR number: 1ZF
- Number of mounting bores: 3
- Outer Diameter 1 [mm]: 136
- Outer Diameter 2 [mm]: 80
- Rim Hole Number: 5
- Manufacturer: METZGER
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring


- Fitting Position: Front Axle
- Required quantity: 2
- for PR number: 1ZF
-
Kaal (kg): 3,
273 - pakendi pikkus [cm]: 16
- pakendi laius [cm]: 16
- pakendi kõrgus [cm]: 11
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Välisläbimõõt [mm]: 136
- Välisläbimõõt 2 [mm]: 80
- Veljeaukude hulk: 5
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ


- for PR number: 1ZF
- Kinnitusaukude hulk: 3
- Laius (mm): 85
- Siseläbimõõt [mm]: 27
- Välisläbimõõt [mm]: 136
- Ava Ø (mm): 112
- Aukude arv: 5
- Laagriteostus: kuullaager
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
765 - OE-numbri jaoks: 5K0 498 621 A
- Name: SW 30 92 7342
- Manufacturer: SWAG
Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Right,
Left, Front Axle - Piirangutega toode/piirangu info 2: koos kummlaagriga
- Veljeaukude hulk: 5
- Montaaživiis: klemmitud
- Väändejõud [Nm]: 200
- Pöördenurk [°]: 180
- Manufacturer: SNR
- Name: SN R154.61
Vehicle Identification Number (VIN): [1K-6-500001;], [5P-6-000001;], [8P-6A000 001;], [8P-6B000 001;]


- Fitting Position: Front Axle both sides
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 4
- Weight [kg]: 3.12
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Width [mm]: 84.5
- Inner Diameter [mm]: 27.5
- Outer Diameter [mm]: 136
- Bearing Type: Rolling Bearing
- General Information: Wheel bearing assembly; front; 4 holes
- Manufacturer: BORSEHUNG









































- Fitting Position: Front Axle
- Required quantity: 2
- for PR number: 1ZF
-
Technical Information: Knuckle,
number of holes 3 - Ääriku läbimõõt [mm]: 136
- Veljeaukude hulk: 5
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Välisläbimõõt 1 [mm]: 80
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Lisainfo: VKBA 6556 SKF
- Additional information: VKBA 6556 SKF


- Fitting Position: Rear Axle
- Number of bores: 4
- Supplementary Article/Info 2: with bolts
- General Information: Wheel bearing assembly; rear; 4 holes; with screws
- Manufacturer: BORSEHUNG



- Fitting Position: Front Axle
-
for PR number: 1ZC,
1ZF - Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
-
Välisläbimõõt [mm]: 136,
4 - Välisläbimõõt 2 [mm]: 65
- Välisläbimõõt 1 [mm]: 80
-
Laius 2 (mm): 48,
1 - Kinnitusaukude hulk: 3
- SVHC: SVHS aineid ei esine
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG




- not for PR number: 1ZF
- Installatsiooni pool: Esisild
- Kinnitusviis: Neljapunktikinnitus
- Veljeaukude hulk: 5
- Hulk telje kohta: 2
- Laius 2 (mm): 48
- Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
- Siseläbimõõt 2 (mm): 51
- Laius (mm): 83
- Välisläbimõõt 2 [mm]: 81
- Kinnitusaukude hulk: 4
-
Välisläbimõõt [mm]: 136,
5 - Siseläbimõõt [mm]: 29
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.