Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 50
- Thickness [mm]: 4
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
- Quantity per packing unit: 25
- Thickness [mm]: 3.65
- Weight [kg]: 0.001
- Inner Diameter [mm]: 19.6
- Manufacturer: METALCAUCHO
-
Vehicle Identification Number (VIN) to: 19-
F- 017480 - Material: Paper
- Fitting Position: engine sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: MH
- Forward- /Backflow: for backflow
Lisainfo: Radiator hose, thermostat housing to intake manifold Additional information: Radiator hose, thermostat housing to intake manifold
- Engine Code: MH
- Forward- /Backflow: for foreflow
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Material: Rubber with fabric lining
- Cooling Hose: from coolant regulator housing to intake manifold
- Forward- /Backflow: for backflow
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.28
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV393
- Manufacturer: ESEN SKV
- Material: Rubber with fabric lining
- Cooling Hose: from coolant regulator housing to engine cooler
- Fitting Position: Upper
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Rubber with fabric lining
- Cooling Hose: from radiator to water pipe
- Fitting Position: Lower
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from radiator to water pipe
-
Lisainfo: Radiator hose,
upper, radiator to water pipe -
Additional information: Radiator hose,
upper, radiator to water pipe
- Construction Year from: 09.1983
- Cooling Hose: from connecting pipe to engine cooler
- Name: Jahutusvoolik
- Manufacturer: MAX
- for OE number: 026121053G
- Weight [g]: 171
- Cooling Hose: from thermostat to waterpump
- Length [mm]: 320
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 24
- Name: IM 220635
- Manufacturer: ORIGINAL IMPERIUM
- Cooling Hose: from coolant regulator housing to engine cooler
Lisainfo: Radiator hose, upper, radiator to coolant regulator housing Additional information: Radiator hose, upper, radiator to coolant regulator housing
- Construction Year to: 07.1985
- Fitting Position: Lower
- Colour: black
- Hose Length [mm]: 385
- Inner Diameter 1 [mm]: 30.5
- Inner Diameter 2 [mm]: 30.5
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year from: 08.1985
- Vehicle Identification Number (VIN) to: 1GL990 000
-
not for country specific design: Sweden,
Switzerland -
Cut-off Marking:
(1) - Fitting Position: Upper
- Cooling Hose: from thermostat to radiator
- Weight [kg]: 0.231
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Rubber with fabric lining
- Cooling Hose: from coolant regulator housing to engine cooler
- Fitting Position: Lower
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 08.1985
- Fitting Position: Upper
- Vehicle Identification Number (VIN) to: 1GL990 000
-
not for country specific design: Sweden,
Switzerland -
Cut-off Marking:
(1) - Colour: black
- Hose Length [mm]: 435
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 31
- Observe broschure:
- Manufacturer: GATES PASKI PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year from: 08.1985
-
not for country specific design: Sweden,
Switzerland -
Fitting Position: Exhaust Side,
Lower - Material: Rubber with fabric lining
- Cooling Hose: from engine cooler to water pump
- Weight [kg]: 0.26
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 030121063
- Weight [g]: 157
- Length [mm]: 187
- Name: IM 220732
- Manufacturer: ORIGINAL IMPERIUM
- Construction Year from: 09.1983
- Cooling Hose: from connecting pipe to engine cooler
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- for OE number: 3293561
- Fitting Position: Upper Right
- Weight [g]: 270
- Length [mm]: 366
- Name: Jahutusvoolik
- Manufacturer: IMP
- Fitting Position: Upper
- Cooling Hose: from radiator to water pipe
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Upper Right
- for OE number: 191121101S
- Manufacturer: SASIC
- Construction Year from: 08.1985
- Lisainfo: Water pipe
- Additional information: Water pipe
- Cooling Hose: from connecting pipe to engine cooler
- for OE number: 030121054
- Weight [g]: 234
- Number of circuits: 3
- Length [mm]: 466
- Inner Diameter 1 [mm]: 18
- Inner Diameter 2 [mm]: 18
- Inner Diameter 3 [mm]: 10
- Name: IM 220731
- Manufacturer: ORIGINAL IMPERIUM
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Material: Rubber
- Specification: flexibel
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Length [mm]: 508
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks