• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 90
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Material: Plastic
• Colour: black
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: Plastic
• Fitting Position: Rear Axle
• Manufacturer: MAX
• Lisainfo: 102831DE5
• Additional information: 102831DE5

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/V

• new version:
• Length [mm]: 84
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 75, 67
• Colour: black
• Material: Plastic
• Fitting Position: Front Axle
• Weight [kg]: 0.032
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Thermoplast
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Rear Axle
• Weight [kg]: 0.03
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 90
• Material: Plastic
• Fitting Position: Rear Axle
• Weight [kg]: 0.03
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/VENTO

• for OE number: 191412135
• Fitting Position: Front Axle
• Colour: black
• Material: Plastic
• Weight [g]: 47
• Inner Diameter [mm]: 53
• Manufacturer: IMPERGOM

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-2003
• Additional information: MGA-2003

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with spring seat
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles without heavy duty suspension
• Article number of recommended accessories: MK133, PK017
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Max. Length [mm]: 636
• Name: CFD 529995
• Manufacturer: DACO

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Name: CFD 559995
• Manufacturer: DACO

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom Yoke
• Manufacturer: DENCKERMANN AMORTYZATORY

• Name: Oil shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II /III
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: JP GROUP
• Lisainfo: Shock absorber, rear
• Additional information: Shock absorber, rear

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)"

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: JP GROUP
• Lisainfo: Shock absorber, rear, heavy duty
• Additional information: Shock absorber, rear, heavy duty

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 740 0017, 100 512 0008, 100 512 0007
• replacement in pairs recommended:
• Name: Amort
• Manufacturer: MEY

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-0317, 72-0224
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Lisainfo: Shock absorber, rear, gas
• Additional information: Shock absorber, rear, gas

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut Insert
• Article number of recommended accessories: SMJ0133
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: SMJ0242
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY
• Lisainfo: 2000198 KAMOKA
• Additional information: 2000198 KAMOKA

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JP GROUP
• Lisainfo: Suspension strut, complete, front
• Additional information: Suspension strut, complete, front

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Lisainfo: Suspension strut, complete, front
• Additional information: Suspension strut, complete, front

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Name: CFD 424786
• Manufacturer: DACO

• Fitting Position: Front Axle
• Article number of recommended accessories: MK033, PK001
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 429950
• Manufacturer: DACO

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694705
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Oil Pressure
• Article number of recommended accessories: SMJ0242
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

• Name: Oil shock absorber
• Quality class: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
VW GOLF III 90-91
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut Insert
• Article number of recommended accessories: SM0133
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0010, 100 412 0000/S, 100 412 0000
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
VW GOLF/JETTA/VENTO
(kvaliteediklass: Q)"

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 454786
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Suspension: for vehicles without heavy duty suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 2.2
• Bore Ø [mm]: 25
• Length 1 [mm]: 423
• Length 2 [mm]: 636
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK133, PK017
• Packaging length [cm]: 62
• Packaging width [cm]: 13.8
• Packaging height [cm]: 13.8
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Suspension: for vehicles without heavy duty suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length [mm]: 528
• Weight [kg]: 3.39
• Fitting Position: Rear Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Suspension: for vehicles without heavy duty suspension
• Specification: Sport
• Article number of recommended accessories: MK033, PK001
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 459950
• Manufacturer: DACO

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Article number of recommended accessories: SM0133
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0133, SMJ0143, SMJ0145, SMJ0168
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Name: Oil shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)"

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SXOV25/12.5X214
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: Amort
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Name: MM 1421G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0133, SMJ0143, SMJ0145, SMJ0168
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Vehicle Equipment: for vehicles with screwed spring strut
• Parameter: FE30X170A
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 412 0016/S, 100 412 0000, 100 412 0000/S
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 3.8
• Bore Ø [mm]: 27
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: MK033, PK001
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Name: Oil shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW GOLF II/III
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• reinforced version:
• Alternatively:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Parameter: SXOV26X212A
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• reinforced version:
• Alternatively:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles without heavy duty suspension
• Specification: Sport
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 2.2
• Bore Ø [mm]: 25
• Length 1 [mm]: 419
• Length 2 [mm]: 613
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK133, PK017
• Packaging length [cm]: 62
• Packaging width [cm]: 13.8
• Packaging height [cm]: 13.8
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Technical Information: SP-001 is available to replace the old spring seat if damaged or unable to be reused.

• Quantity: 2
• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: shock absorber; rear; gas
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW GOLF II/III /SEAT
(kvaliteediklass: Q)"

• Quantity: 2
• Shock Absorber Type: Oil Pressure
• Fitting Position: Front Axle
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber Design: Suspension Strut
• General Information: shock absorber; front; oil
• Manufacturer: VIKA

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: KYB

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
VW GOLF III/VENTO
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694701
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694701
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Parameter: SF30/20X170A
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 2.22
• Bore Ø [mm]: 25
• Length 1 [mm]: 444
• Length 2 [mm]: 661
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK133, PK017
• Packaging length [cm]: 62
• Packaging width [cm]: 13.8
• Packaging height [cm]: 13.8
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

• Name: Oil shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SEAT/VW 96-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW GOLF II/III(KOL.)
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Suspension: for vehicles without heavy duty suspension
• Specification: Sport
• Article number of recommended accessories: PK001, MK033, PK052
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 3.7
• Bore Ø [mm]: 27
• Piston Rod Diameter [mm]: 20
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW GOLF II, GTI
(kvaliteediklass: Q)"