• Fitting Position: Front Axle, inner, Front, Lower
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.13
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: NK

• Fitting Position: Lower Front Axle, Rear
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush sleeve left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Length [mm]: 50
• Manufacturer: DELLO AUTOMEGA

• Length [mm]: 50
• Thickness [mm]: 0.5
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Fitting Position: Front Axle
• Weight [kg]: 0.01
• Name: Puks - K„„ndmik VW USTALAJ¤CA
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Fitting Position: Right, Front Axle, Left
• Length [mm]: 50
• SVHC: No SVHC present!
• Name: Hlss, ootshoova kinnitus
• Manufacturer: FAG

• Fitting Position: Front Axle, both sides, Lower, Rear
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. GOLF/POLO/JE
• Manufacturer: TED

• Installatsiooni pool: Esisild
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right, Front Axle Left
• Length [mm]: 50
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Material: Steel
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. USTALAJ¤CA
• Manufacturer: MEY

• vajaminev tükihulk: 1
• Tootja piirang: pro Querlenker
• Kõrgus (mm): 50
• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 17
• Garantii: Garantii 3 aastat või kuni 75 000 km
• Manufacturer: METZGER

• Installatsiooni pool: esisild vasakul, esisild paremal, ees, all
• Materjal: Kumm/metall
• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33, 36
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: Esisild, kahepoolne
• Laagritüüp: Kummi-metalllaager
• Seerianumber: ZTP-VW-007A
• Manufacturer: NTY

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MAX

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 33
• Thickness 1 [mm]: 54
• Manufacturer: DELPHI

• Fitting Position: Lower, Lower Front Axle
• for OE number: 191 407 182
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 32
• Inner Diameter [mm]: 12
• Width [mm]: 28
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 19HW999000
• Fitting Position: Front, Front Axle Left, Front Axle Right
• Thickness [mm]: 54
• Height [mm]: 54
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 36
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Fitting Position: Lower Front Axle, Front
• Lisainfo: Rubber mount for wishbone, front, front
• Additional information: Rubber mount for wishbone, front, front

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Materjal: Metall, Kumm/metall
• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 36, 33
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: both sides, Lower Front Axle, Front
• Inner Diameter [mm]: 12
• Required quantity: 2
• Name: Puks
• Manufacturer: TED

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• for OE number: 357407182
• Manufacturer: SASIC

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33, 36
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front, Front Axle Right
• Weight [kg]: 0.1
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 191407182
• Fitting Position: Lower, Front, Front Axle
• Required quantity: 2
• Material: Metal
• Weight [g]: 113
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Length [mm]: 54
• Name: IM 32200
• Manufacturer: ORIGINAL IMPERIUM

• Installatsiooni pool: esisild alla
• Pikkus (mm): 54
• Kaal (kg): 0,105
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Laagritüüp: Kummi-metalllaager
• Kaal (g): 105
• Manufacturer: METALCAUCHO

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33, 36
• Material: Rubber/Metal, Metal
• Fitting Position: Front Axle Left, Front, Front Axle Right
• Weight [kg]: 0.11
• Manufacturer: SWAG
• Name: SW 30 69 0002

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Length [mm]: 54
• Inner Diameter [mm]: 12
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF 84-/PASSAT 88-97
• Manufacturer: MEY

• Fitting Position: Front, Right, Left, Front Axle, Lower
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.11
• Manufacturer: CORTECO

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild vasakul, esisild paremal, taga, all
• Materjal: Kumm/metall
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 69
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Manufacturer: MERTZ

• Quantity: 2
• Installatsiooni pool: ees
• Üldine informatsioon: bonded rubber bush; front; small
• Manufacturer: VIKA

• Fitting Position: Rear, Right, Left, Front Axle
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 17
• Total Length [mm]: 41
• Outer Diameter [mm]: 60
• Weight [kg]: 0.16
• Manufacturer: CORTECO
• Name: COC 21652141

• Fitting Position: Front Axle Left, Front Axle Right, Rear, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Version: A
• Quantity per axle: 2
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Width [mm]: 24
• for OE number: 191 407 181B
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear, Front Axle
• Vehicle Identification Number (VIN) to: 1G-N-300 000
• Vehicle Identification Number (VIN) from: 19-E-300 001
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: ees
• Üldine informatsioon: bonded rubber bush; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle both sides, Front
• Required quantity: 2
• paired article number: VKDS 331002
• Manufacturer: SKF
• Name: SK VKDS331002

• Fitting Position: Lower Front Axle, Rear
• Inner Diameter [mm]: 17
• Lisainfo: Rubber mount for wishbone, front ®17 mm inner tube
• Additional information: Rubber mount for wishbone, front ®17 mm inner tube

• Fitting Position: Lower Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.5
• Width [mm]: 55
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Lower Front Axle, Rear
• Inner Diameter [mm]: 12
• Lisainfo: Rubber mount for wishbone, ®12 mm inner tube
• Additional information: Rubber mount for wishbone, ®12 mm inner tube

• Installatsiooni pool: Esisild, all, ees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Kõrgus (mm): 54
• Name: ALT 80941AL
• Manufacturer: ALTE AUTOMOTIVE

• Material: Rubber/Metal
• Fitting Position: Front Axle, Lower, Rear
• Observe service information:
• Outer Diameter [mm]: 69, 60
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right, Rear, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Version: B
• Quantity per axle: 2
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Width [mm]: 24
• for OE number: 191 407 181E
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Rubber/Metal, Aluminium
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.142
• Supplementary Article/Info 2: with mounting sleeve
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Rubber/Metal, Aluminium
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.6
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: SWAG
• Name: SW 30 75 0002

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 69
• Weight [kg]: 0.202
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF 2 TY (Z KONIERZEM)
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, Rear, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 41
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Lower, Front Axle, both sides
• Height 1 [mm]: 26
• Height 2 [mm]: 41
• Inner Diameter [mm]: 17
• Supplementary Article/Info 2: without guide sleeve
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 68
• Manufacturer: OPTIMAL ZAWIESZENIE

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Aluminium, Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.141
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 60
• Fitting Position: both sides, Lower Front Axle, Rear
• Required quantity: 2
• Manufacturer: TEDGUM
• Name: TG 00721010

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 69, 60
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.198
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW P. GOLF 2 Z KONIERZEM KPL Z TULEJK¤ USTALAJ¤C¤

• Material: Aluminium, Rubber/Metal
• Fitting Position: Front Axle, Lower, Rear
• Observe service information:
• Outer Diameter [mm]: 60, 27
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MAX

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 69
• Weight [kg]: 0.203
• Manufacturer: SWAG
• Name: SW 30 69 0003

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Aluminium, Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.203
• Manufacturer: SWAG
• Name: SW 30 69 0001

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Materjal: Alumiinium
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 69, 60
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.6
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: SWAG
• Name: SW 30 75 0001

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Article number of recommended accessories: 44090 01, 44091 01
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF/PASSAT
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,13
• Name: DY 37-06015-6
• Manufacturer: DYS

• Fitting Position: Front Axle, inner, Rear, Lower
• Quantity Unit: Piece
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.17
• Manufacturer: NK

Name: Puks - K„„ndmik VW P. GOLF/PAS !!!Z TULEJ¤ USTALAJ¤C¤!!!

• Installatsiooni pool: esisild alla
• Jämedus/Tugevus (mm): 41
• Kaal (kg): 0,155
• vajaminev tükihulk: 2
• Materjal: Alumiinium, Kumm/metall
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 27, 60
• Laagritüüp: Kummi-metalllaager
• Kaal (g): 155
• Hooldusinfot jälgida:
• Manufacturer: METALCAUCHO

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Material: Aluminium
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MEY

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Suspension beam bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF/JETTA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF/JETTA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter 1 [mm]: 17
• Outer Diameter 1 [mm]: 61
• Thickness 1 [mm]: 41
• Manufacturer: DELPHI
• Name: DE TD243W

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle, Rear, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 41
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, Front Axle Left, Lower, Rear
• Height [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Material: Aluminium
• Supplementary Article/Supplementary Info: without holder
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: MEY

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, both sides, Rear
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW P. GOLF/PASSAT
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Pikkus (mm): 90
• Materjal: Kumm/metall
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 45
• Manufacturer: MERTZ

• Installatsiooni pool: Esisild, all, taga
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60
• Kõrgus (mm): 41
• Name: ALT 80968AL
• Manufacturer: ALTE AUTOMOTIVE

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Quality class: PJ
• Name: Control arm bush - kit left=right

• Fitting Position: Front Axle Right, Front Axle Left, Lower, Rear
• Height [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Material: Steel
• Supplementary Article/Supplementary Info: without holder
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Puks - K„„ndmik VW P. GOLF 2 KPL Z TULEJK¤ USTALAJ¤C¤

• Model Year from: 1984
• Fitting Position: Front, Lower Front Axle
• Weight [kg]: 0.12
• Packaging length [cm]: 5.4
• Packaging width [cm]: 3.6
• Packaging height [cm]: 3.6
• Manufacturer: FEBEST

• for OE number: 191 407 181 DS
• Fitting Position: Lower Front Axle
• Manufacturer: GSP

• Quantity: 2
• Fitting Position: Front Axle
• Installatsiooni pool: Tagasild
• Üldine informatsioon: bonded rubber bush; rear
• Manufacturer: VIKA

• Fitting Position: Lower Front Axle, Rear, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Lower, Front Axle both sides
• Required quantity: 2
• Supplementary Article/Info 2: without mounting sleeve
• paired article number: VKDS 331011
• Name: SK VKDS331011
• Manufacturer: SKF

• Model Year from: 1984
• Weight [kg]: 0.19
• Quantity: 2
• Packaging length [cm]: 9.2
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Manufacturer: FEBEST

• Material: PU (Polyurethane)
• Fitting Position: Lower Front Axle, both sides, Front
• Inner Diameter [mm]: 12
• Supplementary Article/Info 2: with grease cap, with mounting manual
• Required quantity: 2
• Name: Puks
• Manufacturer: TED