• Colour: black
• Lisainfo: Outer temperature sensor
• Additional information: Outer temperature sensor

• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Vehicle Identification Number (VIN) from: 2K-B-200 001
• Fitting Position: Front
• Vehicle Equipment: for vehicles with air conditioning
• Colour: black
• Number of pins: 2
• Lisainfo: Sensor, exterior temperature
• Additional information: Sensor, exterior temperature

• Number of connectors: 2
• Material: Plastic
• Lisainfo: Water level switch, washer
• Additional information: Water level switch, washer

• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Fabrication Number: ECT-AU-000
• Manufacturer: NTY

• Colour Coding: grey
• Fabrication Number: ECT-VW-000
• Manufacturer: NTY
• Name: NTY ECT-VW-000

• Fitting Position: Front
• Colour: black
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Fabrication Number: ECT-AU-001
• Manufacturer: NTY
• Name: NTY ECT-AU-001

• Quantity: 1
• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Colour: grey
• Length [mm]: 20
• Diameter [mm]: 20
• Manufacturer: DELLO AUTOMEGA

• Colour Coding: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Connector Shape: oval, D Shape
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Number of pins: 2
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Manufacturer: 3RG

• Weight [g]: 15
• Name: IM 5309
• Manufacturer: ORIGINAL IMPERIUM

• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Name: CE 17SKV703
• Manufacturer: ESEN SKV

• Number of pins: 2
• Connector Shape: rectangular
• Weight [kg]: 0.007
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: 20 mm
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER
• Additional information: WS2607
• Lisainfo: WS2607

• for OE number: 06A 919 501
• Manufacturer: TRUCKTEC

• Supplementary Article/Info 2: with clamp holder
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Cable Length [mm]: 215
• Fabrication Number: ECP-AU-009
• Manufacturer: NTY

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Manufacturer: ERA

• Engine Code: BSX
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Number of connectors: 2
• Weight [kg]: 0.05
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• General Information: ambient air temperature sensor
• Manufacturer: BORSEHUNG

• Cable Length [mm]: 250
• Number of connectors: 3
• Housing Colour: grey
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Number of connectors: 2
• Weight [kg]: 0.05
• Name: SW 30 93 7476
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Colour: grey
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI

• General Information: ambient air temperature sensor
• Manufacturer: BORSEHUNG

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Version: 2
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Name: CE 17SKV698
• Manufacturer: ESEN SKV

• Model Year to: 2011
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Colour: black
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MEY

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 2
• Housing Colour: grey
• Fitting Position: Air duct, to interior blower
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year to: 2011
• Number of connectors: 2
• Weight [kg]: 0.005
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Colour: black
• Manufacturer: METZGER

• for model code: 2K
• Construction Year to: 08.2010
• Block Separation:
• Construction Year from: 10.2010
• Sensor Type: Passive sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: grey
• Name: CZUJNIK POO½ENIA WAU KORB. VW 1,6-
• Manufacturer: BRM

• Vehicle Identification Number (VIN) from: 2K-B-200 001
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Colour: black
• Number of pins: 2
• Fitting Position: Front
• Vehicle Equipment: for vehicles with air conditioning
• Power [W]: 0.06
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 2K-B-200 000
• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: VAG
• Cable Length [mm]: 500
• Number of pins: 2
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Current carrying capacity [A]: 9
• Operating voltage [V]: 24
• for OE number: 1J6 943 021 B, 1JE 943 021, 1K8 943 021 C
• for article number: 70660022
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

• Housing Colour: black
• Number of pins: 2
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Cable Length [mm]: 190
• Number of pins: 3
• Weight [kg]: 0.06
• Resistor [Ohm]: 900
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.07
• Manufacturer: VALEO
• Name: VA 254019

• Fitting Depth [mm]: 52
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Fabrication Number: EPO-AU-001
• Manufacturer: NTY
• Name: NTY EPO-AU-001

• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Quantity: 1
• General Information: interior temperature sensor
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: with cable
• Length [mm]: 215
• Height [mm]: 24
• Resistor [Ohm]: 900
• Number of connectors: 3
• Manufacturer: VERNET

• Cable Length [mm]: 270
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Engine Code: BSX
• Vehicle Equipment: for vehicles with manual transmission
• Name: ANDUR,P™™RDED
• Manufacturer: EPS

• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 900
• Tolerance [%]: 10
• Cable Length [mm]: 215
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BSX
• Vehicle Equipment: for vehicles with manual transmission
• Name: ANDUR,P™™RDED
• Manufacturer: EPS

• Engine Code: BSX
• Length [mm]: 215
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Housing Type: Aluminium Housing
• Connector Shape: D Shape
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: MAX

• Length [mm]: 250
• Number of connectors: 3
• Weight [kg]: 0.06
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.06
• Length [mm]: 250
• Number of connectors: 3
• Required quantity: 1
• General Information: crankshaft pulse sensor
• Manufacturer: BORSEHUNG

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Number of mounting bores: 3
• Housing Type: Aluminium Housing
• Housing material: Plastic, Polyamid 6.6
• Housing Colour: black
• Vehicle Equipment: for vehicles with oil level sensor
• for OE number: 1J0 907 660F
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Plug Type: Blade Terminal
• Connector Shape: oval
• Number of connectors: 3
• General Information: oil level sensor
• Manufacturer: VIKA

• for OE number: 1J0 907 660 C
• Manufacturer: TRUCKTEC

• Number of pins: 3
• Connector Shape: D Shape
• Lisainfo: Sensor, engine oil level
• Additional information: Sensor, engine oil level

• Sensor Type: Inductive Sensor
• Cable Length [mm]: 191
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Height [mm]: 83
• Fitting Depth [mm]: 52
• for OE number: 1J0 907 660 F, 948 606 140 00
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• for OE number: 1J0 907 660 C, 1J0 907 660 F, 948 606 140 00
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Connector Shape: oval
• Number of Holes: 3
• Manufacturer: ERA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV235

Manufacturer: 3RG

• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Length [cm]: 6
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Warranty: 5 years warranty
• Manufacturer: HUCO

• Number of connectors: 3
• Plug Type: Blade Terminal
• Connector Shape: oval
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for model code: 2K, 2C
• Construction Year to: 08.2010
• Block Separation:
• Construction Year from: 10.2010
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS