• Fitting Position: Rear Axle
• Height [mm]: 160
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• for PR number: G09, G10, G16
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 162
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Fitting Position: Rear Axle
• Weight [kg]: 0.041
• Required quantity: 2
• General Information: protective pipe; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Height [mm]: 160
• Required quantity: 2
• Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T.
• Manufacturer: MAX

• for PR number: G25, G26
• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 221.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Manufacturer: GSP

• Fitting Position: Front Axle
• Height [mm]: 206
• Manufacturer: MAX
• Lisainfo: 72-2185
• Additional information: 72-2185

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• for PR number: G09, G10
• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• for PR number: 1JH, 1JP
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for PR number: G23, G25, G26
• Block Separation:
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Height [mm]: 160
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid SKODA T OCTAVIA

• for PR number: G23, G25, G26
• Block Separation:
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Name: SW 30 60 0038
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Material: Thermoplast
• Required quantity: 2
• Outer Diameter [mm]: 68, 80
• General Information: protective pipe; front
• Manufacturer: VIKA

• Length [mm]: 160
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.041
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/BORA

• Vehicle Identification Number (VIN) from: ******5Z*54016001
• Suspension: for vehicles with sports suspension
• for PR number: 1BD
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Manufacturer: FEB
• Additional information: F22142
• Lisainfo: F22142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT 05-/TIGUAN/TOURAN/SUPERB 08-

• for OE number: 6N0413175A
• Fitting Position: Front Axle
• Height [mm]: 193
• Material: Thermoplast
• Weight [g]: 68
• Diameter 1 [mm]: 63.6
• Diameter 2 [mm]: 74
• Name: IM 37485
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Manufacturer: BORSEHUNG

• Inner Diameter 2 [mm]: 72
• Inner Diameter 1 [mm]: 63
• Height [mm]: 198
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Required quantity: 2
• Manufacturer: TEDGUM

• for PR number: G09, G10, G16
• Block Separation:
• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 206
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• for PR number: G09, G10, G16
• Block Separation:
• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for combined PR number: G09,G10,G16
• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Height [mm]: 200
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: FAST

• for PR number: 1BD
• Fitting Position: Rear Axle
• Weight [kg]: 0.183
• Packaging length [cm]: 27.4
• Packaging width [cm]: 5.6
• Packaging height [cm]: 5.6
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with standard suspension
• Manufacturer: KAMOKA AMORTYZATORY

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"

• Fabrication Number: A-VW-039
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Observe technical data:
• Replace in pairs only:

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Top pin
• Manufacturer: KAVO PARTS

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2424
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 454345
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Diameter [mm]: 25
• Length 1 [mm]: 418
• Length 2 [mm]: 655
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK118, PK078
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE
• Additional information: 23890 MONROE
• Lisainfo: 23890 MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-AU-016
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Length [mm]: 649
• Length 2 [mm]: 404
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2001047 KAMOKA
• Lisainfo: 2001047 KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 741 0111
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle
• for PR number: G09, G25
• Shock Absorber Mounting Type: Bottom Clamp, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Piston Rod Diameter [mm]: 22
• Net weight [kg]: 3.85
• Manufacturer: NK

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMJ0144, SMJ0145
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A2/POLO/FABIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A2/POLO/FABIA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0144, SMA0145
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: OYODO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

• Block Separation:
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 212
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: AK-735004, AK-735410
• Suspension Strut Outer Diameter [mm]: 50
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0008, 100 412 2038/S, 100 412 2038
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 3.9
• Bore Diameter [mm]: 32
• Length 1 [mm]: 360
• Length 2 [mm]: 510
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK156, PK012
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with comfort suspension
• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 507
• min. length [mm]: 353
• Standpipe Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Piston Rod Thread: M14X150
• Name: SN SA65443.18
• Manufacturer: SNR

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 334835

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• for PR number: G09, G10
• Parameter: SF32/22X150A
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 4311G

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-156699
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI A3, 97-
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI A2/POLO/FABIA
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 507
• min. length [mm]: 353
• Standpipe Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Piston Rod Thread: M14X150
• Manufacturer: SNR AMORTYZATORY

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 12
• Packaging length [cm]: 50
• Packaging width [cm]: 18
• Packaging height [cm]: 17
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-052173
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI/SEAT/SKODA
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI/SEAT/SKODA
(kvaliteediklass: Q)"

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-052180
• Manufacturer: BILSTEIN
• Quality class: Q

Additional information: "Tootja: BILSTEIN
VW POLO (9N/)
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW POLO (9N/)
(kvaliteediklass: Q)"