• Supplementary Article/Info 2: with wheel hub, with integrated ABS sensor
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-018
• Manufacturer: NTY
• Name: NTY KLP-VW-018

• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLP-VW-022
• Article number of recommended accessories: KLP-VW-022-Z
• Manufacturer: NTY
• Name: NTY KLP-VW-022

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, Rear Axle

• Material: Metal
• Surface: Zinc-coated
• Manufacturer: AUTO-GH
• Name: GH 399961

Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower Front Axle

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Flange Ø [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Laagriteostus: Kuullaager
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Veljeaukude hulk: 5
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Veljeaukude hulk: 5
• Ava Ø (mm): 112
• Hulk telje kohta: 2
• Tsentri läbimõõt (mm): 32
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos rasvakattega, koos kruviga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 2.53
• Number of Holes: 5
• Warranty: 4 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV006
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Laius (mm): 83
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 136,5
• Laius 2 (mm): 48
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Välisläbimõõt 2 [mm]: 81
• Siseläbimõõt 2 (mm): 51
• Kinnitusaukude hulk: 4
• Name: Rattalaagrikomplekt
• Manufacturer: OPT
• Additional information: 101017
• Lisainfo: 101017

• Installatsiooni pool: Tagasild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Siseläbimõõt 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Installatsiooni pool: Esisild
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt [mm]: 137
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Required quantity: 2
• Parameter: DP2010.10.0089
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Ø [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Flange Ø [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Laius (mm): 69
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT
• Additional information: 102019A
• Lisainfo: 102019A

• Fitting Position: Rear Axle Left, Rear Axle Right
• Veljeaukude hulk: 5
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Siseläbimõõt 2 (mm): 32
• Manufacturer: GSP

• Fitting Position: Front Axle
• OE-numbri jaoks: 1T0498621
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 3.72
• Number of Holes: 5
• Warranty: 4 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV010

• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 136
• OE-numbri jaoks: 1T0 498 621 SK
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Siseläbimõõt [mm]: 32
• Laius (mm): 67,7
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG

• Laius (mm): 70
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2,366
• Piirangutega toode/piirangu info: koos materjaliga
• Manufacturer: FEBI BILSTEIN

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga, koos rattakeskmega Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Flange Ø [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Required quantity: 2
• Parameter: DP2010.10.0087
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Piirangutega toode/piirangu info 2: koos rattalaagriga
• Piirangutega toode/piirangu info: koos materjaliga
• Manufacturer: JP GROUP
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Laius (mm): 70
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2,366
• Piirangutega toode/piirangu info: koos materjaliga
• Name: SW 32 92 3320
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, Rattalaager on integreeritud rattarummu, koos rattakeskmega, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Aukude arv: 5
• Välisläbimõõt [mm]: 137
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Laius (mm): 69, 70
• Siseläbimõõt [mm]: 32
• Piirangutega toode/piirangu info: koos materjaliga
• Installatsiooni pool: Tagasild
• Kaal (kg): 2,549
• Manufacturer: VAICO

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos rattalaagriga Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Bearing Type: Angular Ball Bearing
• Width [mm]: 70
• Weight [kg]: 2.366
• Required quantity: 2
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Vehicle Identification Number (VIN): [;8P-4-162 000]
• Fitting Position: Right, Left, Rear Axle
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos kummlaagriga
• Siseläbimõõt 1 [mm]: 32
• Välisläbimõõt 1 [mm]: 136
• Laius 1 (mm): 69
• Pöördenurk [°]: 180
• Väändejõud [Nm]: 200
• Manufacturer: SNR
• Name: SN R154.54

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• for OE number: 3G0598611A
• Aukude arv: 32
• Laius (mm): 70
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Läbimõõt 2 (mm): 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info: koos materjaliga
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Ava Ø (mm): 112
• Hammastehulk ABS-rõngas: 86
• Veljeaukude hulk: 5
• Laagriteostus: Kuullaager
• Name: RATTARUMM
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos integreeritud rattalaagriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• Laius (mm): 69
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Kinnitusaukude vahe (mm): 112
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Netokaal [kg]: 2,44
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Required quantity: 2
• Laius (mm): 69
• Siseläbimõõt [mm]: 32
• Flants-Ø (mm): 136,9
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 55
• Manufacturer: FAST

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: wheel hub with bearing; rear; with dust cover
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Kinnitusaukude hulk: 4
• Laius (mm): 48
• Siseläbimõõt [mm]: 27,5
• Välisläbimõõt [mm]: 82,5
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Välisläbimõõt 1 [mm]: 65
• Välisläbimõõt 2 [mm]: 136
• Kaal (kg): 3,12
• Manufacturer: FEBI

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos rattakeskmega, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Laius (mm): 83
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 81
• Kinnitusaukude vahe (mm): 112
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Keermemõõt: M14x1,5
• Veljeaukude hulk: 5
• Hammastehulk ABS-rõngas: 86
• Netokaal [kg]: 3,61
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: koos materjaliga
• Siseläbimõõt [mm]: 27,5
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Veljeaukude hulk: 5
• Kinnitusviis: Neljapunktikinnitus
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Hammastehulk: 36
• Laagriteostus: Kuullaager
• Name: RATTARUMM
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos integreeritud magnetilise anduriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 5K0498621
• Aukude arv: 29
• Laius (mm): 67
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Läbimõõt 2 (mm): 5
• Name: DA KWD1001
• Manufacturer: DAYCO

• Rim Hole Number: 5
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 32
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 70
• Manufacturer: IJS GROUP

• Fitting Position: Front Axle
• Required quantity: 2
• Flants-Ø (mm): 137
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 3643 SKF
• Additional information: VKBA 3643 SKF

• Fitting Position: Front Axle
• Kinnitusaukude hulk: 4
• Laius (mm): 48
• Siseläbimõõt [mm]: 27,5
• Välisläbimõõt [mm]: 82,5
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Välisläbimõõt 1 [mm]: 65
• Välisläbimõõt 2 [mm]: 136
• Kaal (kg): 3,12
• Name: SW 32 92 6377
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga, koos rattakeskmega Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Always compare old and new part (in particular OE No.):
• Manufacturer Restriction: Durchmesser beachten
• Outer Diameter [mm]: 137
• Width [mm]: 69.5
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Välisläbimõõt 2 [mm]: 65
• Välisläbimõõt 1 [mm]: 85
• Laius 2 (mm): 48
• Kinnitusaukude hulk: 4
• SVHC: SVHS aineid ei esine
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6106 10 FAG
• Additional information: 713 6106 10 FAG

• Fitting Position: Right, Left, Rear Axle, Front Axle
• Aukudearv 2: 4
• Aukudearv 1: 5
• Piirangutega toode/piirangu info 2: koos kummlaagriga
• Laius 1 (mm): 84
• Välisläbimõõt 1 [mm]: 136
• Pistikkontaktide arv: 43
• Pöördenurk [°]: 180
• Väändejõud [Nm]: 200
• Manufacturer: SNR
• Name: SN R154.56

Vehicle Identification Number (VIN): [;1K-5-600000], [;1K-7W082500], [;5P-5-165000], [;8P-5A200 000], [;8P-5B050 000]

• Quantity: 2
• Fitting Position: Front Axle
• Number of Holes: 4
• General Information: wheel hub with bearing; 4holes
• Manufacturer: VIKA

• Fitting Position: Front Axle, Rear Axle
• Quantity: 2
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 84.5
• Weight [kg]: 3.12
• Bearing Type: Rolling Bearing
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Number of Holes: 4
• General Information: wheel hub with bearing; front; 4 holes
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• OE-numbri jaoks: 1K0407621C
• Veljeaukude hulk: 5
• Hammastehulk: 36
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Versioon: One
• Manufacturer: GSP

• Number of bores: 4
• Supplementary Article/Info 2: with bolts
• Fitting Position: Rear Axle
• General Information: wheel hub with bearing; rear; 4 holes; with screws
• Manufacturer: BORSEHUNG