Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 43.95
- Manufacturer: JP GROUP
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Inner Diameter [mm]: 57.85
- Manufacturer: JP GROUP
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Weight [kg]: 0.003
- Packaging length [cm]: 5.3
- Packaging width [cm]: 5.3
- Packaging height [cm]: 0.5
- Manufacturer: FEBEST
- Inner Diameter [mm]: 57.85
- Name: DRM 01815
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Fitting Position: Charge Air Cooler
- Name: DRM 01675
- Manufacturer: DR.MOTOR AUTOMOTIVE
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 61.9
- Manufacturer: ELRING
- Weight [kg]: 0.005
- Inner Diameter [mm]: 58
- Packaging length [cm]: 6.9
- Packaging width [cm]: 6.9
- Packaging height [cm]: 0.5
- Manufacturer: FEBEST
- for OE number: 3C0145117J
- Weight [g]: 11
- Name: IM 20280
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: BXE
- Inner Diameter [mm]: 61.9
- Shape: Ring Form
-
Material: FPM
(fluoride rubber) - Always compare old and new part (in particular OE No.):
-
Alternative Repair Kit: 2400113,
2400121 - Manufacturer: METZGER
- Inner Diameter [mm]: 57.85
- Shape: Ring Form
-
Material: FPM
(fluoride rubber) - Always compare old and new part (in particular OE No.):
-
Alternative Repair Kit: 2400113,
2400118, 2400119, 2400129, 2400277 - Manufacturer: METZGER
- for OE number: 3C0145117H
- Weight [g]: 12
- Name: IM 20281
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 3C0145117F
- Weight [g]: 12
- Name: IM 20282
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: BXE
- Model Year to: 2009
- Diameter [mm]: 44
- Weight [kg]: 0.025
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 56
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Right
- Material: Rubber with fabric lining
- Connector Ø pressure side [mm]: 49
- Connector Ø suction side [mm]: 49
-
Fabrication Number: GPP-
VW- 023 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Material: Rubber with fabric lining
- Colour: red
- Turbocharger Line: Hot Side
-
Fabrication Number: GPP-
VW- 031 - Manufacturer: NTY
-
Name: NTY GPP-
VW- 031
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber) - Alternatively:
- Inner Diameter [mm]: 43.95
- Quantity: 5
- Name: DRM 01135
- Manufacturer: DR.MOTOR AUTOMOTIVE
-
Fabrication Number: HZP-
TY- 103 -
Material: AEM
(Ethylene Acrylate Rubber) - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Material: Rubber with fabric lining
-
Fitting Position: Right,
Lower, Front, Charge Air Cooler -
Fabrication Number: GPP-
AU- 031 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Left,
Charge Air Cooler -
Supplementary Article/Supplementary Info: with gaskets/
seals - Supplementary Article/Info 2: with quick couplers
-
Fabrication Number: GPP-
AU- 007 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1K0 145 832 B
- Material: Rubber with fabric lining
- Connector Ø pressure side [mm]: 59
- Connector Ø suction side [mm]: 59
-
Fabrication Number: GPP-
VW- 021 - Manufacturer: NTY
-
Name: NTY GPP-
VW- 021
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BLS
-
Fitting Position: Right,
Upper - Manufacturer: JP GROUP
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- Engine Code: BXE
-
Fitting Position: Right,
Upper - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
-
Fitting Position: Right,
engine sided, Throttle Housing -
Supplementary Article/Supplementary Info: with seal,
with quick coupling - Hose Type: Moulded Hose
- Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Inner Diameter [mm]: 62
- Thickness [mm]: 4.3
- Quantity Unit: Packing Unit
-
Fitting Position: Front,
Left, Lower - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- for OE number: 1T0145790B
- Manufacturer: NRF
- for OE number: 1T0145790F
- Weight [g]: 186
- Connector Manufacturer: HENN
- Length [mm]: 168
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Manufacturer: IMPERGOM
- Quantity: 1
- General Information: pressure hose
- Manufacturer: VIKA
- Engine Code: BLS
-
Fitting Position: Right,
Lower - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
-
Fitting Position: Left,
Lower, Outlet - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- Material: Rubber with fabric lining
- Connector Ø pressure side [mm]: 61
- Connector Ø suction side [mm]: 61
-
Fabrication Number: GPP-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Right,
engine sided -
Supplementary Article/Supplementary Info: with gaskets/
seals - Hose Type: Moulded Hose
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Left Front
- Length [mm]: 270
- Inner Diameter [mm]: 44
-
Cooling Hose: Charge air cooler to piping,
Cold Side - Weight [kg]: 0.38
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV072
- Manufacturer: ESEN SKV
-
Fitting Position: Left Front,
Charge Air Cooler -
Supplementary Article/Supplementary Info: with seal,
with quick coupling - Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BXE
-
Fitting Position: Left,
Lower - Manufacturer: JP GROUP
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- Construction Year to: 06.2009
- Engine Code: BXE
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 160
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Observe broschure:
- Manufacturer: GATES
- Engine Code: BLS
- Fitting Position: Right Front
- Length [mm]: 300
- Colour: black
-
Material: PE
(Polyethylene) -
Cooling Hose: Piping to charge air cooler,
Hot Side - Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 50
- Weight [kg]: 0.36
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV076
-
Fitting Position: Charge Air Cooler,
Inlet - for OE number: 3C0145832M
- Manufacturer: NRF
- Engine Code: BLS
-
Fitting Position: Front,
Left Front, Left, Lower - Length [mm]: 295
- Colour: black
-
Material: AEM
(Ethylene Acrylate Rubber) -
Cooling Hose: Charge air cooler to piping,
Cold Side - Inner Diameter 1 [mm]: 52.5
- Inner Diameter 2 [mm]: 50
- Weight [kg]: 0.32
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- for OE number: 3C0145838D
- Manufacturer: SASIC
- for OE number: 3C0145838D
- Manufacturer: NRF
- Construction Year to: 06.2009
- Engine Code: BLS
-
Turbocharger Line: Hot Side,
Piping to charge air cooler -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 295
- Inner Diameter 1 [mm]: 52.5
- Inner Diameter 2 [mm]: 50
- Observe broschure:
- Manufacturer: GATES
- for OE number: 3C0145834M
- Weight [g]: 354
- Connector Manufacturer: HENN
- Length [mm]: 273
- Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 50
- Name: IM 221872
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Left Front
-
Cooling Hose: Charge air cooler to piping,
Cold Side - Length [cm]: 42
- Width [cm]: 15
- Height [cm]: 8
- Weight [kg]: 0.5
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV004
- Fitting Position: Left Rear
-
Cooling Hose: Piping to engine block,
Cold Side - Weight [kg]: 0.23
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV142
- Manufacturer: ESEN SKV
- Fitting Position: Right Rear
-
Cooling Hose: Turbocharger to piping,
Hot Side - Length [cm]: 27
- Width [cm]: 17
- Height [cm]: 11
- Weight [kg]: 0.2
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV006
- Manufacturer: ESEN SKV
- Engine Code: BXE
- Weight [kg]: 0.3
- Weight [g]: 300
- Manufacturer: METALCAUCHO
- Engine Code: BLS
- Fitting Position: Lower Left
- Supplementary Article/Info 2: with hose clip
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: BXE
-
Fitting Position: Left,
Upper - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- for OE number: 1K0145832B
- Weight [g]: 410
- Connector Manufacturer: HENN
- Length [mm]: 316
- Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 50
- Manufacturer: IMPERGOM
- Material: Rubber with fabric lining
- Fitting Position: Lower
- General Information: pressure hose
- Manufacturer: VIKA
- Quantity: 1
- General Information: pressure hose
- Manufacturer: VIKA
- Fitting Position: Right Front
-
Cooling Hose: Piping to charge air cooler,
Hot Side - Weight [kg]: 0.46
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- for OE number: 3C0145834L
- Weight [g]: 279
- Connector Manufacturer: HENN
- Length [mm]: 192
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 52
- Name: IM 221859
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: BXE
- Fitting Position: Right Front
-
Cooling Hose: Piping to charge air cooler,
Hot Side - Weight [kg]: 0.5
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 3C0145834M
- Manufacturer: SASIC
- Lisainfo: 3336002 SAS
- Additional information: 3336002 SAS
- Quantity: 1
- Material: Rubber with fabric lining
-
Fitting Position: engine sided,
Right - General Information: pressure hose
- Manufacturer: VIKA
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 3C0145834L
- Manufacturer: NRF
- Engine Code: BXE
-
Fitting Position: Right,
Upper - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
-
Fitting Position: Charge Air Cooler,
Outlet - Supplementary Article/Info 2: with clamps
- Manufacturer: NRF
- for OE number: 3C0145832D
- Manufacturer: MEAT&DORIA
- for OE number: 1K0145834L
- Manufacturer: MEAT&DORIA
- for OE number: 3C0145834M
- Manufacturer: NRF
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 1K0145832B
- Manufacturer: NRF
- Quantity: 1
- Weight [kg]: 0.44
- Required quantity: 1
- Outer Diameter [mm]: 68.5
- Outer Diameter 1 [mm]: 64.5
- General Information: pressure hose
- Manufacturer: VIKA
- for OE number: 3C0145832M
- Weight [g]: 428
- Connector Manufacturer: HENN
- Length [mm]: 289
- Inner Diameter 1 [mm]: 50
- Inner Diameter 2 [mm]: 50
- Name: IM 221873
- Manufacturer: ORIGINAL IMPERIUM
- Quantity: 1
- Material: Rubber with fabric lining
- Fitting Position: Left
- General Information: pressure hose
- Manufacturer: VIKA
- Construction Year to: 06.2009
- Engine Code: BLS
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 170
- Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 46
- Observe broschure:
- Manufacturer: GATES
- Material: Rubber with fabric lining
- for OE number: 3C0145834L
- for OE number: 3C0145832D
- Weight [g]: 406
- Connector Manufacturer: HENN
- Length [mm]: 269
- Inner Diameter 1 [mm]: 50
- Inner Diameter 2 [mm]: 50
- Manufacturer: IMPERGOM
- Name: IM 221871
- Fitting Position: Charge Air Cooler
- Manufacturer: NRF
- Quantity: 1
- General Information: pressure hose
- Manufacturer: VIKA
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Weight [kg]: 0.216
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 06.2009
- Engine Code: BLS
- for OE number: 3C0 145 834 M
-
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: PE
(Polyethylene) - Supplementary Article/Info 2: with hose clip
- Colour: black
- Hose Length [mm]: 300
- Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 50
- Observe broschure:
- Manufacturer: GATES
- Weight [kg]: 0.27
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV615
- Manufacturer: ESEN SKV
- Construction Year to: 06.2009
- Engine Code: BLS
- for OE number: 3C0 145 834 M
-
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 300
- Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 50
- Observe broschure:
- Manufacturer: GATES
- Construction Year to: 06.2009
- Engine Code: BLS
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Material: Silicone
- Colour: Orange
- Hose Length [mm]: 145
- Inner Diameter 1 [mm]: 35.5
- Inner Diameter 2 [mm]: 51
- Observe broschure:
- Manufacturer: GATES
-
Lisainfo: 09-
0287 GAT -
Additional information: 09-
0287 GAT
- Engine Code: BLS
-
Fitting Position: Left,
Upper - Material: Silicone
- Manufacturer: JP GROUP
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- Engine Code: BXE
-
Fitting Position: Right,
engine sided - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: BXE
- Fitting Position: Centre
-
Cooling Hose: Piping to engine block,
Cold Side - Weight [kg]: 0.66
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Engine Code: BLS
- Fitting Position: Exhaust Turbocharger
-
contains article number: 2400580/
2400582 - Manufacturer: METZGER
- Engine Code: BXE
- Weight [kg]: 0.41
- Weight [g]: 410
- Manufacturer: METALCAUCHO
- Construction Year to: 06.2009
- Engine Code: BXE
-
Turbocharger Line: Cold Side,
Charge air cooler to piping - Material: Silicone
- Colour: black
- Hose Length [mm]: 320
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Observe broschure:
- Manufacturer: GATES
- for OE number: 1K0145838N
- Manufacturer: NRF
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 1K0145832B
- Manufacturer: SASIC
- Engine Code: BXE
- Fitting Position: Left
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: BXE
- Fitting Position: Right
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Rubber with fabric lining
-
Fitting Position: Left,
Lower
- Engine Code: BXE
- Weight [kg]: 0.43
- Weight [g]: 430
- Manufacturer: METALCAUCHO
- Fitting Position: Outlet
- for OE number: 3C0145828K
- Manufacturer: SASIC
- Construction Year to: 06.2009
- Engine Code: BLS
- for OE number: 3C0 145 834 L
-
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 190
- Inner Diameter 1 [mm]: 53
- Inner Diameter 2 [mm]: 58
- Observe broschure:
- Manufacturer: GATES
- Construction Year to: 06.2009
- Engine Code: BXE
-
Turbocharger Line: Hot Side,
Piping to charge air cooler -
Material: Polychloroprene
(Neoprene) - Colour: black
- Hose Length [mm]: 350
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 52
- Observe broschure:
- Manufacturer: GATES
- Engine Code: BLS
-
Turbocharger Line: Hot Side,
Piping to charge air cooler - Connector Ø pressure side [mm]: 60
- Connector Ø suction side [mm]: 62
- for OE number: 3C0 145 832 M
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Weight [kg]: 0.374
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter 1 [mm]: 36
- Manufacturer: FAST
- Engine Code: BXE
- Weight [kg]: 0.52
- Weight [g]: 520
- Manufacturer: METALCAUCHO
- Engine Code: BXE
-
Turbocharger Line: Hot Side,
Piping to charge air cooler - Connector Ø pressure side [mm]: 55
- Connector Ø suction side [mm]: 55
- Material: Rubber with fabric lining
- for OE number: 1K0 145 762 BA
- Compression ring material: Stainless Steel
- Weight [kg]: 0.43
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 1
- General Information: pressure hose
- Manufacturer: VIKA
- Engine Code: BXE
- Outer Diameter [mm]: 68.5
- Turbocharger Line: Turbocharger to charge air cooler
-
Fitting Position: Charge Air Cooler,
Right - Outer Diameter 1 [mm]: 64.5
- Weight [kg]: 0.44
- for OE number: 1K0 145 832 B
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI BILSTEIN
- Additional information: FE49361
- Lisainfo: FE49361
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 06.2009
- Engine Code: BXE
-
Turbocharger Line: Hot Side,
Turbocharger to piping -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 430
- Inner Diameter 1 [mm]: 52
- Inner Diameter 2 [mm]: 52
- Observe broschure:
- Manufacturer: GATES
- Weight [kg]: 0.122
- Compression ring material: Stainless Steel
- Material: Rubber with fabric lining
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BXE
-
Fitting Position: Left,
engine sided - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Charge Air Cooler,
Inlet - for OE number: 1K0145834L
- Manufacturer: SASIC
- Engine Code: BXE
- Outer Diameter [mm]: 68.5
- Turbocharger Line: Turbocharger to charge air cooler
-
Fitting Position: Charge Air Cooler,
Right - Outer Diameter 1 [mm]: 64.5
- Weight [kg]: 0.44
- Supplementary Article/Info 2: with quick couplers
- for OE number: 1K0 145 832 B
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Connector Ø suction side [mm]: 66
- Connector Ø pressure side [mm]: 61
- Material: Rubber with fabric lining
- Weight [kg]: 0.114
- Compression ring material: Stainless Steel
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BXE
- Connector Ø pressure side [mm]: 59
- Connector Ø suction side [mm]: 59
- for OE number: 1K0 145 832 B
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Weight [kg]: 0.462
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BXE
-
Turbocharger Line: Cold Side,
Piping to engine block - Connector Ø pressure side [mm]: 49
- Connector Ø suction side [mm]: 49
-
Fitting Position: Right,
engine sided - Compression ring material: Stainless Steel
- Material: Rubber with fabric lining
- Weight [kg]: 0.318
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BXE
-
Fitting Position: Charge Air Cooler,
Upper, Right -
Article number of recommended accessories: 2400581,
2400582 - Manufacturer: METZGER
-
Fitting Position: Right,
Charge Air Cooler -
Supplementary Article/Supplementary Info: with gaskets/
seals - Hose Type: Moulded Hose
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BXE
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Connector Ø pressure side [mm]: 61
- Connector Ø suction side [mm]: 61
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Weight [kg]: 0.337
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Outlet
- for OE number: 1K0145838N
- Manufacturer: SASIC
- Engine Code: BXE
-
Fitting Position: Left,
Upper - for OE number: 1K0 145 838 N
-
Article number of recommended accessories: 2400581,
2400582 - Manufacturer: METZGER
- for OE number: 3C0 145828 K
- Compression ring material: Stainless Steel
- Material: Rubber with fabric lining
- Supplementary Article/Info 2: with bracket
- Weight [kg]: 0.252
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BLS
-
Fitting Position: Upper,
Left - Turbocharger Line: Piping to turbocharger
- Material: Silicone
-
contains article number: 2400580,
2400582 - Manufacturer: METZGER
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber)
-
Shape: O-
Ring -
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 62
- Thickness [mm]: 4.3