• Vehicle Equipment: for vehicles with direct shift transmission
• Transmission Type: Dual-Clutch Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic filter, gearbox, 6 speed aut.
• Additional information: Hydraulic filter, gearbox, 6 speed aut.

Filter type: Filter Insert

• Filter type: Filter Insert
• Width [mm]: 146
• Height [mm]: 28
• Seal Diameter [mm]: 7
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: 6-Speed Dual-Clutch Transmission
• for PR number: 0ES
• Vehicle Equipment: for vehicles with direct shift transmission
• Thread Size: M 16
• Thread Pitch [mm]: 1.5
• Bolt Head-/Nut Design: Hexagon Socket
• Spanner Size: 8
• Colour: black
• Length [mm]: 87
• Outer Diameter [mm]: 21
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN HANS PRIES

Material: Plastic, PA 66 GF 30, GRP (Glass fibre Reinforced Plastic) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 58
• Height [mm]: 105
• Transmission Code: DQ250
• Manufacturer: KAMOKA FILTRY

• Transmission Type: 6-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-003
• Supplementary Article/Supplementary Info: with seal
• Transmission Code: 09G, AQ250, TF-60SN
• Filter type: Filter Insert
• Manufacturer: NTY

• Height [mm]: 106
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-012
• Name: NTY FSF-AU-012
• Manufacturer: NTY

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Type: 6-Speed Automatic Transmission
• Height [mm]: 35
• Supplementary Article/Supplementary Info: with seal
• Quantity Unit: Set
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-004
• Manufacturer: NTY

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 123
• Height [mm]: 30
• Transmission Code: TF-60SN, TF-61SN
• Manufacturer: KAMOKA FILTRY

• Vehicle Equipment: for vehicles without direct shift transmission
• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 146
• Height [mm]: 28
• Seal Diameter [mm]: 7
• Transmission Code: TF-60SN, TF-61SN
• Manufacturer: KAMOKA FILTRY

• Transmission Code: DSG6 (DQ250)
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 105
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 55
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Diameter [mm]: 58
• Height [mm]: 106
• Inner Diameter [mm]: 17
• Transmission Type: Automatic Transmission
• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Quality class: PJ
• Name: Automatic transmission filter

• Filter type: Filter Insert
• Transmission Type: 6-Speed Automatic Transmission
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: Dual-Clutch Transmission
• Filter type: Filter Insert
• Shape: Cylindrical
• Transmission Code: DQ250/02E
• Supplementary Article/Info 2: with seal ring
• for OE number: 02E 398 051
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: 09G
• Transmission Type: 6-Speed Automatic Transmission
• Vehicle Equipment: for vehicles without direct shift transmission
• See accessories list for additionally required parts:
• Weight [kg]: 0.352
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: METALCAUCHO

• Vehicle Equipment: for vehicles with direct shift transmission
• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: DQ250
• Filter type: with filter heating
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105
• Outer Diameter [mm]: 58, 56
• Weight [kg]: 0.08
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Diameter [mm]: 58.1
• Height [mm]: 106.1
• Inner Diameter 2 [mm]: 17
• Packaging height [cm]: 13.1
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Net Weight [g]: 74
• Manufacturer: KNECHT
• Name: KN HX132D
• Lisainfo: HX 132D MAH
• Additional information: HX 132D MAH

• Transmission Code: DSG6 (DQ250)
• Outer Diameter [mm]: 58
• Inner Diameter [mm]: 29
• Height [mm]: 106
• Manufacturer: HENGST FILTER

Transmission Type: Automatic Transmission, Manual-/optional automatic transmission

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105.4
• Outer Diameter [mm]: 58, 55.5
• Weight [kg]: 0.08
• Manufacturer: FEBI BILSTEIN
• Additional information: FE44176
• Lisainfo: FE44176

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105.4
• Outer Diameter [mm]: 58, 55.5
• Weight [kg]: 0.08
• Manufacturer: SWAG
• Name: SW 30 94 4176
• Lisainfo: 30 94 4176 SWA
• Additional information: 30 94 4176 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: DSG6 (DQ250)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 105
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 55
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Width [mm]: 146
• Height [mm]: 28
• Transmission Type: Automatic Transmission
• Gasket Design: Soft Material Gasket
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Code: 02E, 0D9, DQ250
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Filter type: Filter Insert
• Vehicle Equipment: for vehicles with direct shift transmission
• Weight [kg]: 0.1
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Lisainfo: V10-0440 VAI
• Additional information: V10-0440 VAI

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 02E, 0D9, DQ250
• Outer Diameter [mm]: 58
• Height [mm]: 106
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.111
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission ID: JTY/KGJ
• Filter type: Filter Insert
• Transmission Code: 09G
• Transmission Type: 6-Speed Automatic Transmission
• Vehicle Equipment: for vehicles without direct shift transmission
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: DQ250
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 290
• Height [mm]: 35
• Quantity Unit: Set
• Supplementary Article/Supplementary Info: with seal
• Transmission Code: 09G
• See accessories list for additionally required parts:
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Weight [kg]: 0.446
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Aluminium
• Core Width [mm]: 74
• Core Length [mm]: 182
• Core Depth [mm]: 46
• Fabrication Number: CCL-VW-034
• Manufacturer: NTY

• Vehicle Equipment: for vehicles without direct shift transmission
• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: 09G
• Supplementary Article/Supplementary Info: with seal
• Material: Rubber
• Supplementary Article/Info 2: with spacer sleeve
• Manufacturer: METZGER

• Filter type: Pre-Filter
• Transmission Code: DQ250
• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Screen Filter
• Length [mm]: 235
• Width [mm]: 165
• Height [mm]: 65
• Weight [kg]: 0.25
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Screen Filter
• Length [mm]: 235
• Width [mm]: 165
• Height [mm]: 65
• Weight [kg]: 0.25
• Name: SW 33 10 2944
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: DQ250
• Fitting Position: inner
• Filter type: Pre-Filter, Filter Insert
• Model Year to: 2004
• See accessories list for additionally required parts:
• Vehicle Equipment: for vehicles with direct shift transmission
• Weight [kg]: 0.431
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Length [mm]: 203.5
• Width [mm]: 121
• Height [mm]: 25.5
• Transmission Code: 09G, 09M, TF-60SN, TF-61SN
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Number of Holes: 8
• Packaging length [cm]: 19.7
• Packaging height [cm]: 23.3
• Net Weight [g]: 288
• Packaging width [cm]: 4.8
• Manufacturer: KNECHT
• Name: KN HX150KIT

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission

• Transmission Type: 6-Speed Automatic Transmission
• Cooling Type: Water-cooled
• Material: Aluminium

• Transmission Type: 6-Speed Automatic Transmission
• Cooling Type: Water-cooled
• Core Depth [mm]: 46
• Core Width [mm]: 75
• Core Length [mm]: 190
• Number of ribs: 11
• Manufacturer: NRF
• Lisainfo: 190*75*46
• Additional information: 190*75*46

• Core Length [mm]: 190
• Core Width [mm]: 96
• Core Depth [mm]: 75
• Inlet Ø [mm]: 16
• Outlet Ø [mm]: 16
• Packaging length [cm]: 21
• Packaging width [cm]: 11
• Packaging height [cm]: 12
• Weight [kg]: 0.72
• Manufacturer: AKSDASIS

• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211010

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Model Year from: 2005
• See accessories list for additionally required parts:
• Transmission Code: DQ250
• Fitting Position: inner
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Pre-Filter, Filter Insert
• Weight [kg]: 0.431
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Length [mm]: 202.8
• Width [mm]: 124
• Height [mm]: 30.5
• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Packaging width [cm]: 19
• Packaging length [cm]: 23
• Net Weight [g]: 361
• Packaging height [cm]: 6.2
• Name: KN HX256D
• Manufacturer: KNECHT

• Transmission Type: 6-Speed Automatic Transmission
• Cooling Type: Water-cooled
• Core Depth [mm]: 76
• Core Length [mm]: 192
• Core Width [mm]: 114
• Material: Aluminium
• Number of ribs: 10
• Supplementary Article/Supplementary Info: without oil filter housing, without gaskets/seals
• Manufacturer: NISSENS
• Lisainfo: VOLKSWAGEN SCIROCCO (137, 138) (08-) 1.4 TSI
• Additional information: VOLKSWAGEN SCIROCCO (137, 138) (08-) 1.4 TSI

• Radiator type: Brazed cooling fins
• Packaging width [cm]: 11.2
• Packaging height [cm]: 12.2
• Packaging length [cm]: 21
• Net Weight [g]: 669
• Name: MH CLC202000S
• Manufacturer: MAHLE

Transmission Type: Dual-Clutch Transmission, 6-Speed Automatic Transmission General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Transmission ID: JTY/KGJ
• Transmission Code: 09G
• Vehicle Equipment: for vehicles without direct shift transmission
• See accessories list for additionally required parts:
• Weight [kg]: 0.34
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 6-speed automatic transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Clutch: for vehicles with double clutch
• Number of Gears: 6 Speed
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.572
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.25
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV208

• Fabrication Number: EAT-AU-001
• Transmission Type: 6-Speed Automatic Transmission
• Manufacturer: NTY
• Name: NTY EAT-AU-001