Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 260
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Additional information: Brake Disc
- for PR number: 1ZM
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
- Surface: Coated
- Manufacturer: JP GROUP
- Lisainfo: Brake Disc
- Additional information: Brake Disc
-
for PR number: 1ZE,
1ZP - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Additional information: Brake Disc
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Name: PIDURIKETAS
- Manufacturer: QUARO
- Lisainfo: QD1754
- Additional information: QD1754
- Fitting Position: Rear Axle
-
for PR number: 1KD,
1KQ - Outer Diameter [mm]: 253
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51.3
- Rim Hole Number: 5
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Hub Diameter [mm]: 150
- Weight [kg]: 3.5
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- for PR number: 1KJ
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Additional information: Brake Disc
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Fitting Position: Rear Axle
- Centering Diameter [mm]: 65
- Height [mm]: 48.6
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Name: PIDURIKETAS
- Manufacturer: MAX
-
for PR number: 1KJ,
1KV - Construction Year to: 06.2009
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 286
- Bolt Hole Circle Ø [mm]: 112
- Manufacturer: DELLO AUTOMEGA
- Construction Year to: 06.2009
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF - Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Height [mm]: 48.3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Number of Holes: 5
- Manufacturer: LPR
- for PR number: 1KJ
- Construction Year to: 06.2009
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49
- Outer Diameter [mm]: 282
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Rear Axle
- for PR number: 1KJ
- Alternatively:
- Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0250/ 1775 -
Supplementary Article/Info 2: without wheel bearing,
without ABS sensor ring - Surface: Coated
- Machining: Untreated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 48.1
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG5020C
- Quality class: PJ
- Construction Year to: 06.2009
-
for PR number: 1KJ,
1KV - Fitting Position: Rear Axle
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 159
- Bore Ø [mm]: 15.3
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF - Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0100/ 1551 -
Supplementary Article/Info 2: without wheel bearing,
without ABS sensor ring - Surface: Coated
- Machining: Untreated
- Outer Diameter [mm]: 260
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 65
- Height [mm]: 48.4
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG3890C
- Construction Year to: 06.2009
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 256
- Bolt Hole Circle Ø [mm]: 112
- Manufacturer: DELLO AUTOMEGA
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 282
- Fitting Position: Rear Axle
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Minimum thickness [mm]: 10
- Name: PIDURIKETAS
- Manufacturer: MAX
- Construction Year to: 06.2009
- Fitting Position: Rear Axle
- for PR number: 1KJ
- Centering Diameter [mm]: 65
- Height [mm]: 48.2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Outer Diameter [mm]: 282
- Number of Holes: 5
- Manufacturer: LPR
- Name: LPR A1005P
- Construction Year to: 05.2008
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 253
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 51.2
- Minimum thickness [mm]: 8
- Rim Hole Number: 9
- Number of mounting bores: 1
- Weight [kg]: 7.33
- Manufacturer: VALEO
- Construction Year to: 06.2009
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49
- Outer Diameter [mm]: 256
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Manufacturer: KAMOKA
- for PR number: 1KJ
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48.3
- Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 108194 FEBI
- Additional information: 108194 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1KJ
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48.3
- Outer Diameter [mm]: 286
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1ZM
- Construction Year to: 06.2009
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 280
- Bolt Hole Circle Ø [mm]: 112
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- for PR number: 1KJ
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.5
- Rim Hole Number: 5
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Hub Diameter [mm]: 150
- Weight [kg]: 4.87
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Construction Year to: 06.2008
- Fitting Position: Rear Axle
- for PR number: 1KE
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Height [mm]: 48.3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: solid
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Surface: Coated
-
Supplementary Article/Info 2: with bolts/
screws -
Fulfils ECE norm: ECE-
R90 - Drill Diameter, up to [mm]: 15.3
- Name: PIDURIKETAS
- Manufacturer: BOS
- for PR number: 1KD
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 255
- Height [mm]: 51.6
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- for PR number: 1KE
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 256
- Height [mm]: 48.6
- Number of Holes: 9
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Weight [kg]: 9.05
- Minimum thickness [mm]: 10
- Manufacturer: TOMEX BRAKES
- Brake Disc Type: Vented
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19
- Name: PIDURIKETAS
- Manufacturer: MAX
- Fitting Position: Rear Axle
- for PR number: 1KE
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Height [mm]: 48.4
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140.1
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Packaging length [cm]: 27.8
- Packaging width [cm]: 27.8
- Packaging height [cm]: 12.2
- Weight [kg]: 4.1
- Manufacturer: MINTEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Hub Diameter [mm]: 150
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.4
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only:
- Surface: Coated
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF - Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.5
- Rim Hole Number: 5
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Hub Diameter [mm]: 150
- Weight [kg]: 4.02
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- for PR number: 1KJ
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48.3
- Outer Diameter [mm]: 286
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Name: SW 30 92 4382
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 06.2009
- Fitting Position: Front Axle
- for PR number: 1ZM
- Height [mm]: 49.5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Outer Diameter [mm]: 280
- Minimum thickness [mm]: 19
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Manufacturer: LPR
- Name: LPR A1001V
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Outer Diameter [mm]: 257
- Height [mm]: 48.6
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- for PR number: 1KJ
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 286
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- for PR number: 1KE
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Brake Disc Type: solid
- Minimum thickness [mm]: 10
- Height [mm]: 48.4
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Name: PIDURIKETAS
- Manufacturer: QUARO
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 282
- Fitting Position: Rear Axle
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Surface: Painted
- Minimum thickness [mm]: 10
- Name: PIDURIKETAS
- Manufacturer: MAX
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Name: PIDURIKETAS
- Manufacturer: MAX
-
for PR number: 1LJ,
1ZD - Construction Year to: 06.2009
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Manufacturer: DELLO AUTOMEGA
-
for PR number: 1ZE,
1ZP - Construction Year to: 06.2009
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 288
- Bolt Hole Circle Ø [mm]: 112
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 10
- Thread Size: 15.3
- Number of Holes: 9
- Colour: black
- Surface: Painted
- Supplementary Article/Info 2: with screw
-
Test Mark: E1 90R-
02 C0190/ 0525 - Name: PIDURIKETAS
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF - Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4
-
Hole Arrangement/Number: 6/
5 - Manufacturer: ZIMMERMANN
- Quantity: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Diameter [mm]: 280
- Minimum thickness [mm]: 19
- Number of Holes: 9
- Wheel Hub Diameter [mm]: 65
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 280
- General Information: brake disc; front; 280*22MM
- Manufacturer: VIKA
- Construction Year to: 06.2009
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 50
- Outer Diameter [mm]: 288
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- for OE number: 1J0615301K
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Rear Axle
- for PR number: 1KE
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Height [mm]: 48.4
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140.1
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Weight [kg]: 4.1
- Name: HE 8DD355109641
- Manufacturer: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- for PR number: 1KJ
- for brake disc diameter [mm]: 286
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 286
- Height [mm]: 48.5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- for PR number: 1KD
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 255
- Height [mm]: 51.6
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Surface: Zink flake coated
-
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Construction Year to: 06.2009
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Centering Diameter [mm]: 65
- Height [mm]: 49.5
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Manufacturer: LPR
- Name: LPR A1002V
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF - Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Surface: Coated
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 08.9488.11
- Quality class: Q
- Construction Year to: 06.2009
-
for PR number: 1ZE,
1ZP - Fitting Position: Front Axle
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
- Manufacturer: DENCKERMANN ZAWIESZENIE
- for PR number: 1KJ
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 282
- Height [mm]: 48.3
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- Lisainfo: 1155230043
- Additional information: 1155230043
- for PR number: 1ZM
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 280
- Hub Diameter [mm]: 154
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49.5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Parameter: DP1010.11.0252
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Height [mm]: 48.3
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Outer Diameter [mm]: 281.8
- Number of Holes: 4
- Centering Diameter [mm]: 65
- No. of holes 1: 1
- Manufacturer: DRIVE
-
for PR number: 1LJ,
1ZA, 1ZD - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Additional information: Brake Disc
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0277/ 1358 -
Supplementary Article/Info 2: without wheel bearing,
without ABS sensor ring - Surface: Coated
- Machining: Untreated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49.6
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG3833C
- Additional information: BG3833C DELPHI
- Lisainfo: BG3833C DELPHI
- Construction Year to: 06.2009
-
for PR number: 1ZE,
1ZP - Fitting Position: Front Axle
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
- Surface: Painted
- Manufacturer: DENCKERMANN FILTRY
- Construction Year to: 05.2008
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49
- Minimum thickness [mm]: 19
- Rim Hole Number: 9
- Number of mounting bores: 1
- No. of holes 1: 1
-
Test Mark: ECE-
R90 - Weight [kg]: 12.46
- Manufacturer: VALEO
Supplementary Article/Info 2: without screw, without ABS sensor ring, without integrated wheel bearing
- Fitting Position: Rear Axle
- Brake Disc Thickness [mm]: 12
-
Brake Disc Type: solid,
slotted/ perforated - Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Surface: Painted
- Minimum thickness [mm]: 10
- Name: PIDURIKETAS
- Manufacturer: MAX
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Outer Diameter [mm]: 257
- Height [mm]: 48.6
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Surface: Zink flake coated
-
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Fitting Position: Rear Axle
- for PR number: 1KE
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Brake Disc Type: solid
- Minimum thickness [mm]: 10
- Height [mm]: 48.4
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Name: Piduriketas
- Manufacturer: QUARO
- Construction Year to: 05.2008
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Minimum thickness [mm]: 22
- Rim Hole Number: 9
- Number of mounting bores: 1
- No. of holes 1: 1
-
Test Mark: ECE-
R90 - Weight [kg]: 7.896
- Manufacturer: VALEO
Supplementary Article/Info 2: without screw, without ABS sensor ring, without integrated wheel bearing
- Fitting Position: Rear Axle
- for PR number: 1KF
- paired article number: 573158J
- Test Mark: R90 Homologated
- Height [mm]: 48.3
- Weight [kg]: 8.63
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9
- Outer Diameter [mm]: 256
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Tightening Torque [Nm]: 120
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake System: TRW
- Packing Type: Box
- Quantity Unit: Set
-
Supplementary Article/Info 2: with bolts/
screws - Version: JC
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 12
- Manufacturer: JURID
- Fitting Position: Rear Axle
- for PR number: 1KJ
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 282
- Surface: Coated
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 08.A202.11
- Construction Year to: 06.2009
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 50
- Outer Diameter [mm]: 312
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Construction Year to: 06.2009
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - Outer Diameter [mm]: 312
- Brake Disc Type: internally vented
- Height [mm]: 49.6
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 22
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Manufacturer: LPR
- for PR number: 1LJ
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 50
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 8.6
- Manufacturer: BLUE PRINT
- Additional information: ADV184308 BLU
- Lisainfo: ADV184308 BLU
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 286
- General Information: brake disc; rear; 286*12MM
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- for PR number: 1KJ
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 49
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4.6
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- for PR number: 1LJ
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 49.7
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 8.6
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 24384 FEBI
- Additional information: 24384 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Centering Diameter [mm]: 65
- Height [mm]: 49.9
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Name: PIDURIKETAS
- Manufacturer: MAX
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
- Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 7.3
- Manufacturer: MINTEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- for PR number: 1KJ
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 282
- Height [mm]: 48.3
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Surface: Zink flake coated
-
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- for PR number: 1KJ
- for brake disc diameter [mm]: 286
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 286
- Height [mm]: 48.5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Surface: Zink flake coated
-
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
- Manufacturer: MEYLE
General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD, 1ZA - Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
-
Additional information: 100-
3300- 20 -
Lisainfo: 100-
3300- 20
- Fitting Position: Rear Axle
- for PR number: 1KE
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Height [mm]: 48.4
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140.1
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Packaging length [cm]: 27.8
- Packaging width [cm]: 27.8
- Packaging height [cm]: 12.2
- Weight [kg]: 4.1
- Name: PIDURIKETAS
- Manufacturer: TEX
- Quality class: Q
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Fitting Position: Front Axle
- for PR number: 1ZM
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 19
- Weight [kg]: 5.92
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Construction Year to: 06.2009
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0165/ 0625 - Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
-
for PR number: 1LJ,
1ZD - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Number of Holes: 9
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Weight [kg]: 17.7
- Minimum thickness [mm]: 22
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
- for PR number: 1ZM
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 280
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Name: BR 09.9167.11
- Manufacturer: BREMBO
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.9
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Minimum thickness [mm]: 22
- Name: PIDURIKETAS
- Manufacturer: MAX
-
Lisainfo: 19-
1044MAX -
Additional information: 19-
1044MAX
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Construction Year to: 06.2009
-
for PR number: 1KJ,
1KV - Fitting Position: Rear Axle
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- Surface: Coated
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 159
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0165/ 0535 - Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
- Fitting Position: Front Axle
-
for PR number: 1ZP,
1ZE - Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 09.9145.11
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - Brake Disc Type: internally vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
- Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Packaging length [cm]: 32.8
- Packaging width [cm]: 32.8
- Packaging height [cm]: 12.5
- Weight [kg]: 8.6
- Manufacturer: MINTEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Construction Year to: 06.2009
- for PR number: 1ZM
- Fitting Position: Front Axle
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 0139 - Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Name: Piduriketas
- Manufacturer: QUARO
- Quantity: 2
-
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Front Axle
-
Machining: High-
carbon - Brake Disc Type: Vented
- Surface: Painted
- Diameter [mm]: 288
- Width [mm]: 25
- Minimum thickness [mm]: 22
- Number of Holes: 5
- Wheel Hub Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 288
- General Information: brake disc; front; 288*25MM
- Manufacturer: VIKA
- Construction Year to: 06.2009
-
for PR number: 1KE,
1KF - Fitting Position: Rear Axle
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- Surface: Coated
- No. of holes 2: 9
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
- MAPP code available:
- Name: PIDURIKETAS
- Manufacturer: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Outer Diameter [mm]: 312
- Manufacturer: FAST
- Parameter: DP1010.11.0433
- Rim Hole Number: 5
- Fitting Position: Front Axle
- Height [mm]: 49.7
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Outer Diameter [mm]: 312
- Number of Holes: 4
- Centering Diameter [mm]: 65
- No. of holes 1: 1
- Manufacturer: DRIVE
- for PR number: 1LJ
- Fitting Position: Front Axle
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: Vented
- Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 282
- General Information: brake disc; rear
- Manufacturer: BORSEHUNG
- Quantity: 2
-
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Front Axle
-
Machining: High-
carbon - Brake Disc Type: Vented
- Surface: Painted
- Diameter [mm]: 312
- Width [mm]: 25
- Minimum thickness [mm]: 22
- Number of Holes: 5
- Wheel Hub Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- General Information: brake disc; front; 312*25MM
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 280
- General Information: brake disc; front
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Name: PIDURIKETAS
- Manufacturer: QUARO
- Construction Year to: 06.2009
-
for PR number: 1ZE,
1ZP - Fitting Position: Front Axle
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 0010 - Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF -
Brake Disc Type: solid,
slotted - Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Surface: Coated
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 08.9488.75
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Fitting Position: Rear Axle
- for PR number: 1KJ
-
Brake Disc Type: solid,
slotted - Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 282
- Surface: Coated
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 08.A202.75
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF -
Brake Disc Type: solid,
Perforated - Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Surface: Coated
- Minimum thickness [mm]: 10.5
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Manufacturer: BREMBO
- Name: BR 08.9488.1X
- Quality class: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Fitting Position: Front Axle
-
Brake Disc Type: Vented,
slotted/ perforated - Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.9
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Surface: Painted
- Minimum thickness [mm]: 22
- Name: PIDURIKETAS
- Manufacturer: MAX
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 09.9772.11
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Number of Holes: 9
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 22
-
Thread Size: 15,
4 - Bolt Hole Circle Ø [mm]: 112
- Colour: black
- Surface: Painted
- Supplementary Article/Info 2: with screw
-
Test Mark: E190R-
02 C0176/ 0613 - Name: PIDURIKETAS
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- for PR number: 1ZM
-
Brake Disc Type: slotted,
internally vented - Brake Disc Thickness [mm]: 22
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 280
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 09.9167.75
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Construction Year to: 06.2009
- for PR number: 1ZM
- Fitting Position: Front Axle
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02C0858/ 1315 - MAPP code available:
- Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KF -
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4
-
Hole Arrangement/Number: 6/
5 - Manufacturer: ZIMMERMANN
-
for PR number: 1LJ,
1ZD - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Height [mm]: 49.7
-
Machining: High-
carbon - Centering Diameter [mm]: 65
- Surface: Coated
- Minimum thickness [mm]: 22
-
Hole Arrangement/Number: 5/
10 - Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 22
- Height [mm]: 49.7
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Name: Piduriketas
- Manufacturer: QUARO
- Construction Year to: 06.2009
-
for PR number: 1KJ,
1KV - Fitting Position: Rear Axle
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- Surface: Coated
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 159
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Manufacturer: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Rear Axle
- for PR number: 1KJ
-
Brake Disc Type: solid,
Perforated - Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 282
- Surface: Coated
- Minimum thickness [mm]: 10.5
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Name: BR 08.A202.1X
- Manufacturer: BREMBO
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Fitting Position: Front Axle
-
for PR number: 1ZP,
1ZE -
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
- Name: BR 09.9145.75
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Fitting Position: Rear Axle
- for PR number: 1KJ
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 49
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4.6
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP - Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 7.3
- Name: PIDURIKETAS
- Manufacturer: TEX
- Lisainfo: 92120805
- Additional information: 92120805
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Construction Year to: 06.2009
-
for PR number: 1LJ,
1ZD - Fitting Position: Front Axle
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 146
- Bore Ø [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 1001 - Name: PIDURIKETAS
- Manufacturer: ATE
- for PR number: 1LJ
- Fitting Position: Front Axle
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Ø [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: Vented
- Surface: Zink flake coated
-
Machining: High-
carbon -
Supplementary Article/Info 2: with bolts/
screws - Quality: PREMIUM
- Required quantity: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- Fitting Position: Front Axle
- for PR number: 1ZM
-
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 22
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 280
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 19.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Manufacturer: BREMBO
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Construction Year to: 06.2009
-
for PR number: 1ZE,
1ZP - Fitting Position: Front Axle
-
Supplementary Article/Info 2: with bolts/
screws - Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Bore Ø [mm]: 15.3
-
Test Mark: E1 90R-
02C0858/ 1210 - MAPP code available:
- Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
-
for PR number: 1ZP,
1ZE -
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Surface: Coated
- Minimum thickness [mm]: 22.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Name: BR 09.9145.1X
- Manufacturer: BREMBO
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - Brake Disc Type: internally vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Ø [mm]: 15.3
- Packaging length [cm]: 32.8
- Packaging width [cm]: 32.8
- Packaging height [cm]: 12.5
- Weight [kg]: 8.6
- Name: PIDURIKETAS
- Manufacturer: TEX
- Quality class: Q
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD - paired article number: 573128J
- Test Mark: R90 Homologated
- Height [mm]: 50
- Weight [kg]: 8.94
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Outer Diameter [mm]: 312
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Tightening Torque [Nm]: 120
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake System: ATE
- Packing Type: Box
- Quantity Unit: Piece
-
Supplementary Article/Info 2: with bolts/
screws - Version: JC
- Packaging length [cm]: 33
- Packaging width [cm]: 33
- Packaging height [cm]: 6.7
- Manufacturer: JURID
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD -
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Manufacturer: BREMBO
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Construction Year to: 06.2009
-
for PR number: 1LJ,
1ZD - Fitting Position: Front Axle
-
Supplementary Article/Info 2: with bolts/
screws - Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 146
- Bore Ø [mm]: 15.3
-
Test Mark: E1 90R-
02C0858/ 1214 - MAPP code available:
- Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Rear Axle
- for PR number: 1KJ
-
Brake Disc Type: solid,
slotted - Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 49
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ohne ABE
- Minimum thickness [mm]: 10
- Weight [kg]: 4.6
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- for PR number: 1ZM
-
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: KBA 60872
- Minimum thickness [mm]: 19
- Weight [kg]: 5.92
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- General Information: brake disc; front
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP -
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZP -
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: KBA 60872
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD -
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Manufacturer: BREMBO
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD, 1ZA -
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZD, 1ZA -
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Manufacturer: ZIMMERMANN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks