• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Seerianumber: NPW-VW-005
• Manufacturer: NTY

Installatsiooni pool: esisild vasakul, esisild paremal, kastipoolselt, Tagasild vasakul, Tagasild paremal Käigukasti liik: Käigukast 6 käiku, Käigukast 5 käiku, Käigukast, automaatkast 4 käiku, Automaatkäigukast, Topeltsiduriajam, 7-käiguline, Topeltsiduriga käigukast

• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 32
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Diameter 1 [mm]: 28
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Seerianumber: NPW-VW-002
• Manufacturer: NTY

Installatsiooni pool: esisild vasakul, esisild paremal, kastipoolselt, Tagasild vasakul, Tagasild paremal Käigukasti liik: Käigukast 6 käiku, Käigukast 5 käiku, Käigukast, Automaatkäigukast, automaatkast 6 käiku, Topeltsiduriajam, 7-käiguline, Topeltsiduriga käigukast

• Transmission Type: Manual Transmission
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 53
• Length [mm]: 105
• Diameter 1 [mm]: 98
• Thread Size: M16x1.5
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Manufacturer: BGA

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Välishambumine diferentsiaali pool: 33
• Seerianumber: NPW-VW-088
• Laius (mm): 34
• Läbimõõt [mm]: 86
• Manufacturer: NTY
• Name: NTY NPW-VW-088

Lisainfo: VW 4MOTION TIGUAN 07-18, GOLF V,VI, PASSAT 05-15, CC 08-16, SKODA OCTAVIA II 4WD 04-13, SUPERB II 4WD 08-15, AUDI QUATTRO A1, A3 03-15, Q3, TT 06-15, SEAT 4WD ALTEA, ALTEA XL /TYLNY,LEWY,PRAWY/ Additional information: VW 4MOTION TIGUAN 07-18, GOLF V,VI, PASSAT 05-15, CC 08-16, SKODA OCTAVIA II 4WD 04-13, SUPERB II 4WD 08-15, AUDI QUATTRO A1, A3 03-15, Q3, TT 06-15, SEAT 4WD ALTEA, ALTEA XL /TYLNY,LEWY,PRAWY/

• Transmission Type: 7-Speed Automatic Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 53
• Diameter 1 [mm]: 98
• Length [mm]: 105
• Outer Diameter 1 [mm]: 59.6
• Outer Diameter 2 [mm]: 98
• Thread Size: M16x1,5
• Manufacturer: BGA

• Installatsiooni pool: Esisild
• Käigukasti liik: Käigukast
• Hammastehulk: 33
• Läbimõõt [mm]: 100
• Sisehambumus rattapool: 33
• Manufacturer: VIKA

Üldine informatsioon: c.v.joint; inner; 33teeth; MT; 100MM; Inner tooth33mm

• Fitting Position: transmission sided, Rear Axle
• Sisehambumus diff.pool ühend.ühendusvõlliga: 33
• Aukude arv: 6
• Välisläbimõõt [mm]: 100
• Liigendtüüp: Gelenkscheibe
• pikkus [mm]: 34
• Name: Inner CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild, rattapool
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 33
• Rõngastihendi läbimõõt (mm): 59
• Välisläbimõõt [mm]: 82
• Liigendtüüp: Kugelgleichlaufgelenk
• Seerianumber: NPZ-VW-043
• Manufacturer: NTY

• Fitting Position: Front Axle Right, transmission sided
• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 127.5
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 34
• Seal Diameter [mm]: 46.9
• Technical Information Number: TJ
• Manufacturer: GSP

• Installatsiooni pool: Esisild, rattapool
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59
• Välisläbimõõt [mm]: 100
• Liigendtüüp: Kugelgleichlaufgelenk
• Seerianumber: NPZ-VW-019

• Transmission Type: Automatic Transmission
• for OE number: 191407331
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Installatsiooni pool: kastipoolselt, esisild paremal
• Välishambumine diferentsiaali pool: 40
• Sisehambumus diff.pool ühend.kastiga: 34
• Rõngastihendi läbimõõt (mm): 46
• Välisläbimõõt [mm]: 85
• Liigendtüüp: Tripodegelenk
• Seerianumber: NPW-VW-027
• Manufacturer: NTY
• Name: NTY NPW-VW-027

• Installatsiooni pool: esisild vasakul, kastipoolselt
• Välishambumine diferentsiaali pool: 26
• Sisehambumus diff.pool ühend.kastiga: 34
• Rõngastihendi läbimõõt (mm): 31
• Välisläbimõõt [mm]: 85
• Liigendtüüp: Tripodegelenk
• Seerianumber: NPW-VW-025
• Manufacturer: NTY

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 97.95
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow
• Supplementary Article/Supplementary Info: with attachment material
• Quantity per axle: 2
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: NPZ-VW-047
• Pikkus (mm): 80
• Välishambumine diferentsiaali pool: 36
• Sisehambumus diff.pool ühend.ühendusvõlliga: 33
• Rõngastihendi läbimõõt (mm): 59,5
• Manufacturer: NTY

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Manufacturer: FAG

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 105
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Technical Information Number: Original design
• Joint Type: 6-ball joint
• Manufacturer: GSP

• Model Year from: 2012
• Installatsiooni pool: kastipoolselt, esisild paremal
• Välishambumine diferentsiaali pool: 40
• Sisehambumus diff.pool ühend.ühendusvõlliga: 34

• Thread Size: M20x1,5
• Bellows Material: Thermoplast
• Drive Shaft: without ABS ring
• Weight [kg]: 1.897
• Manufacturer: VAICO

Fitting Position: Front Axle Left, Front Axle Right, Wheel Side, Front Axle General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Construction Year to: 03.2013
• Construction Year from: 05.2013
• Installatsiooni pool: Esisild
• Sisehambumus rattapool: 27
• Välishambumine ratta pool: 36
• Üldine informatsioon: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 97.9
• Bellows Material: Rubber
• Manufacturer: METELLI
• Additional information: 15-1463MET
• Lisainfo: 15-1463MET

• Fitting Position: Wheel Side, Front Axle
• Engine Code: CCZB
• Transmission Type: 6-Speed Manual Transmission
• Keermemõõt: M16x1.5
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 60
• Välisläbimõõt [mm]: 98
• Liigendtüüp: Kugelgleichlaufgelenk
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Technical Information Number: Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Outer Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Weight [kg]: 1.7
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: kastipoolselt, esisild vasakul
• Välishambumine diferentsiaali pool: 40
• Sisehambumus diff.pool ühend.kastiga: 28
• Rõngastihendi läbimõõt (mm): 46
• Välisläbimõõt [mm]: 98
• Liigendtüüp: Kugelgleichlaufgelenk
• Seerianumber: NPW-VW-031
• Manufacturer: NTY
• Name: NTY NPW-VW-031

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 771056730

• Fitting Position: Rear Axle, Wheel Side
• Length [mm]: 79
• External Toothing differential side: 36
• Internal Toothing differential side, conn. to transmission: 33
• Seal Diameter [mm]: 59.5
• Manufacturer: GSP

Transmission Type: 6-Speed Manual Transmission, 7-Speed Automatic Transmission

• Installatsiooni pool: esisild vasakul
• Pikkus (mm): 148
• Välishambumine diferentsiaali pool: 37
• Sisehambumus diff.pool ühend.ühendusvõlliga: 34
• Rõngastihendi läbimõõt (mm): 34,5
• Välisläbimõõt [mm]: 85
• Liigendtüüp: Tripodegelenk
• Seerianumber: NPW-VW-064

• Fitting Position: Right, Left, Rear Axle, Front Axle
• Joint Type: Flexible Joint Disc
• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Name: SN IJK54.003
• Manufacturer: SNR

Vehicle Identification Number (VIN): [6K-X-081153;], [6K-X-524 122;], [8C-R-000001;], [;8L-X-001445], [8L-X-001446;]

• Thread Size: M16x1,5
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Version: 6 balls
• Length 2 [mm]: 106
• Fitting Position: outer
• Manufacturer: SNR /NTN-SNR/

• New Part:
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: CV Joint
• Thread Size: M16x1,5
• Bellows Material: Thermoplast
• Supplementary Article/Info 2: with bellow
• Lubrication: with grease lubrication
• Length [mm]: 106
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Weight [kg]: 2.483
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 03.2013
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: Wheel Side, Front Axle
• Block Separation:
• Construction Year from: 06.2013
• Length [mm]: 105
• Outer Diameter [mm]: 100
• External Thread Size: M16 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Weight [kg]: 2.6
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild paremal, esisild vasakul
• Sisehambumus rattapool: 27
• Välishambumine ratta pool: 36
• Üldine informatsioon: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Rear Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Manufacturer: SKF
• Name: SK VKJA8001

• Model Year from: 2012
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.509
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Model Year from: 2012
• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 1.932
• Internal Toothing differential side, conn. to transmission: 33
• Seal Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Model Year from: 2012
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.729
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 100
• Joint Type: CV Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, transmission sided
• Transmission Type: 6-Speed Manual Transmission
• for OE number: 5N0498103D
• Length [mm]: 104
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 28
• Seal Diameter [mm]: 46.9
• Manufacturer: GSP

• Transmission Type: Dual-Clutch Transmission
• Fitting Position: Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.4
• Outer Diameter [mm]: 99.9
• Bellows Material: Rubber
• Manufacturer: METELLI

• Model Year from: 2012
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.553
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Engine Code: CCZB
• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 104.5
• Internal Toothing differential side, conn. to conn. shaft: 28
• Internal Toothing differential side, conn. to transmission: 40
• Seal Diameter [mm]: 56
• Outer Diameter [mm]: 98
• Machined: with groove in inner part (inside)
• Name: SK VKJA8791
• Manufacturer: SKF

• Model Year from: 2012
• Fitting Position: Rear Axle, Wheel Side
• Weight [kg]: 1.324
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 9
• Packaging height [cm]: 9
• Manufacturer: FEBEST

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Front Axle, transmission sided
• for OE number: 5N0498103
• Length [mm]: 104
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 28
• Seal Diameter [mm]: 46.9
• Manufacturer: GSP

• Engine Code: CCZB
• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Manufacturer: SKF
• Name: SK VKJA3028

• Seal Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 36
• Length 2 [mm]: 105
• Internal Toothing wheel side: 27
• Fitting Position: outer
• Name: SN OJK54.035
• Manufacturer: SNR

• Engine Code: CCZB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (middle)
• Technical Information: Pre-greased joint
• Manufacturer: SKF
• Name: SK VKJA5824

• New Part:
• Fitting Position: Front Axle Right
• Transmission Type: 6-Speed Manual Transmission
• Installatsiooni pool: esisild vasakul, kastipoolselt
• Sisehambumus diff.pool ühend.ühendusvõlliga: 28
• Sisehambumus diff.pool ühend.kastiga: 40

• Liigendtüüp: Gelenkscheibe
• Sisehambumus diff.pool ühend.ühendusvõlliga: 33
• mehhaaniliselt töödeldud: ilma avavuseta siseosal
• Liigendläbimõõt (mm): 100
• Pikkus (mm): 34
• Piirangutega toode/piirangu info 2: koos mütsiga
• Ava Ø (mm): 8, 86
• Aukude arv: 6
• Kaitsekummi materjal: NBR (Nitril-Butadien-Kautschuk)
• Uus osa:
• Manufacturer: GKN LOBRO

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Liigendtüüp: Kugelgleichlaufgelenk
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 60
• mehhaaniliselt töödeldud: auguga siseosal
• Liigendläbimõõt (mm): 100
• Pikkus (mm): 105
• Keermemõõt: M16X1.5
• Kaitsekummi materjal: TPE (termoplastiline elastomeer)
• Uus osa:
• Manufacturer: LOBRO

Tehniline informatsioon: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Engine Code: CCZB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: Front Axle Right, transmission sided
• Length [mm]: 128.3
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to conn. shaft: 34
• Seal Diameter [mm]: 56
• Outer Diameter [mm]: 85
• Joint Type: Tripod Joint
• Machined: with groove in inner part (inside)
• Name: SK VKJA8726
• Manufacturer: SKF

• Model Year from: 2012
• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.46
• Internal Toothing differential side, conn. to transmission: 28
• Seal Diameter [mm]: 108
• Outer Diameter [mm]: 107
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 18
• Packaging width [cm]: 11
• Packaging height [cm]: 11
• Manufacturer: FEBEST

• Engine Code: CCZB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: transmission sided, Front Axle Left
• Length [mm]: 148.5
• External Toothing differential side: 37
• Internal Toothing differential side, conn. to conn. shaft: 34
• Seal Diameter [mm]: 34.5
• Outer Diameter [mm]: 85
• Joint Type: Tripod Joint
• Machined: with groove in inner part (inside)
• Manufacturer: SKF
• Name: SK VKJA8729

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Liigendtüüp: Kugelgleichlaufgelenk
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 60
• mehhaaniliselt töödeldud: ilma avavuseta siseosal
• Liigendläbimõõt (mm): 98
• Pikkus (mm): 100
• Keermemõõt: M16x1.5x77
• Kaitsekummi materjal: TPE (termoplastiline elastomeer)
• Uus osa:
• Piirangutega toode/piirangu info 2: koos kruviga
• Manufacturer: LOBRO

Tehniline informatsioon: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Liigendtüüp: Kugelgleichlaufgelenk
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 60
• mehhaaniliselt töödeldud: ilma avavuseta siseosal
• Liigendläbimõõt (mm): 98
• Pikkus (mm): 106
• Keermemõõt: M16x1.5
• Kaitsekummi materjal: TPE (termoplastiline elastomeer)
• Uus osa:
• Manufacturer: LÖBRO

Tehniline informatsioon: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Fitting Position: Front Axle Right, transmission sided
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Liigendtüüp: Tripodegelenk
• Sisehambumus diff.pool ühend.ühendusvõlliga: 34
• Sisehambumus diff.pool ühend.kastiga: 40
• mehhaaniliselt töödeldud: auguga siseosal
• Liigendläbimõõt (mm): 86
• Pikkus (mm): 128
• Läbimõõt tripoodirull (mm): 43
• Kaitsekummi materjal: Termoplast
• Uus osa:
• Manufacturer: LÖBRO