• Charge Type: Exhaust Turbocharger
• Thickness [mm]: 3
• Width [mm]: 57
• Manufacturer: AJUSA

• Charge Type: Exhaust Turbocharger
• Thickness [mm]: 3.5
• Seal Diameter [mm]: 45.3
• Material: FPM (fluoride rubber)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Charge Type: Exhaust Turbocharger
• Material: Sheet Steel
• Fitting Position: Upper
• Forward- /Backflow: for backflow
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: GPP-VW-066
• Manufacturer: NTY

Manufacturer: METALCAUCHO

• for OE number: 6R0145828D
• Fitting Position: Charge Air Cooler, Left
• Length [mm]: 120
• Outer Diameter [mm]: 59
• Supplementary Article/Info 2: with clamps
• Manufacturer: BUGIAD

• Fitting Position: Outlet
• for OE number: 6R0145828D
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Outlet
• for OE number: 6R0145828D
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• for OE number: 6R0145828
• Material: Rubber
• Weight [g]: 128
• Length [mm]: 140
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 46
• Name: IM 222081
• Manufacturer: ORIGINAL IMPERIUM

• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Material: Rubber with fabric lining
• Fabrication Number: GPP-AU-048
• Manufacturer: NTY

• Fitting Position: Charge Air Cooler, Outlet
• Turbocharger Line: Hot Side
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Construction Year from: 12.2009
• Specification: 8Z4
• Climate Zones: for hot climate zones
• Manufacturer: METALCAUCHO

• Colour: black
• Material: ACM (Polyacrylate)
• Inner Diameter 1 [mm]: 55.5
• Inner Diameter 2 [mm]: 55.5
• Weight [kg]: 0.19
• Warranty: 3 years warranty
• Hose Length [mm]: 160
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 43SKV447
• Manufacturer: ESEN SKV

• Length [mm]: 217
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 53
• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 6R0145834F
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Material: Rubber with fabric lining
• Connector Ø pressure side [mm]: 60
• Connector Ø suction side [mm]: 60
• Fabrication Number: GPP-VW-028
• Manufacturer: NTY

• Slim Set:
• Manufacturer: FISCHER

• Charge Type: Exhaust Turbocharger
• Alternative Repair Kit: KT110490
• Slim Set:
• Manufacturer: FISCHER

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 6R0145832E
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 6R0145834F
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 6R0145834F
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 6R0145832F
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• General Information: pressure hose
• Manufacturer: VIKA

• Cooling Hose: Piping to engine block, Cold Side
• Weight [kg]: 0.22
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Charge Type: Exhaust Turbocharger
• Manufacturer: JP GROUP
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• Construction Year to: 11.2009
• Block Separation:
• Construction Year from: 12.2009
• for PR number: 8Z5, 8Z7
• Fitting Position: Left
• Weight [kg]: 0.38
• Weight [g]: 350
• Supplementary Article/Info 2: without clamps
• Manufacturer: METALCAUCHO

• Fitting Position: Left Rear
• Length [mm]: 120
• Colour: black
• Material: Silicone
• Cooling Hose: Turbocharger to piping, Hot Side
• Inner Diameter 1 [mm]: 46
• Inner Diameter 2 [mm]: 46
• Weight [kg]: 0.14
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV149
• Manufacturer: ESEN SKV

• for OE number: 6R0145832E
• Material: Rubber
• Weight [g]: 353
• Length [mm]: 305
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Name: Laadimisohu voolik
• Manufacturer: IMP

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 6R0145832A
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Charge Type: Exhaust Turbocharger
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• Name: Montaa§ikomplekt, kompressor
• Manufacturer: ELR

for OE number: 03L 253 016 A, 03L 253 016 D, 03L 253 016 H, 03L 253 056 R, 5439970-0086, 5439970-0098, 5439970-0114, 5439980-0086, 5439980-0098, 5439980-0114, 5439988-0086, 5439988-0098, 5439988-0114, 5439990-0086, 5439990-0098, 5439990-0114

• Fitting Position: Charge Air Cooler, Inlet
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Quantity: 1
• General Information: pressure hose
• Manufacturer: VIKA

• Turbocharger Line: Cold Side, Piping to engine block
• Material: ACM (Polyacrylate)
• Colour: black
• Hose Length [mm]: 140
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 56
• Observe broschure:
• Manufacturer: GATES

• Fitting Position: Right
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Cooling Hose: Charge air cooler to piping, Cold Side
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 53
• Weight [kg]: 0.35
• Warranty: 3 years warranty
• Hose Length [mm]: 250
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV191
• Manufacturer: ESEN SKV

• Production date to: 30.11.2009
• for PR number: 8Z4, 8Z6, 8Z9
• Fitting Position: Charge Air Cooler, Right
• Manufacturer: METZGER

Material: NBR (nitrile butadiene rubber), Aramid, CR (chloroprene rubber)

• Construction Year from: 12.2009
• Specification: 8Z4
• Climate Zones: for hot climate zones
• Manufacturer: METALCAUCHO

• Construction Year to: 11.2009
• Weight [kg]: 0.42
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV190
• Manufacturer: ESEN SKV

• Construction Year to: 11.2009
• Cooling Hose: Piping to charge air cooler, Hot Side
• Weight [kg]: 0.41
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV188
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.189
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Construction Year to: 11.2009
• General Information: pressure hose
• Manufacturer: VIKA

• Quantity: 1
• Construction Year to: 11.2009
• Construction Year from: 12.2009
• General Information: pressure hose
• Manufacturer: VIKA

• Construction Year to: 11.2009
• Climate Zones: not for hot climate zones
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: Polychloroprene (Neoprene)
• Colour: black
• Hose Length [mm]: 375
• Inner Diameter 1 [mm]: 54
• Inner Diameter 2 [mm]: 54
• Observe broschure:
• Manufacturer: GATES

• Production date to: 30.11.2009
• for PR number: 8Z4, 8Z6, 8Z9
• Fitting Position: Charge Air Cooler, Left
• Manufacturer: METZGER

Material: NBR (nitrile butadiene rubber), Aramid, CR (chloroprene rubber)

• Fabrication Number: GPP-VW-100
• for OE number: 6R0129654C
• Manufacturer: NTY

• General Information: pressure hose
• Manufacturer: VIKA

• Quantity: 1
• Construction Year to: 11.2009
• General Information: pressure hose
• Manufacturer: VIKA

• Alternative Repair Kit: KT110590E
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: FIS

• Length [mm]: 340
• Colour: black
• Material: Silicone
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Weight [kg]: 0.4
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Charge Type: Exhaust Turbocharger
• Alternative Repair Kit: KT110490E
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: FIS

• Construction Year to: 11.2009
• Climate Zones: for hot climate zones
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 250
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 53
• Observe broschure:
• Manufacturer: GATES PASKI PRZEWODY

• Engine Code: CAYB
• for OE number: 03L145771AL
• Forward- /Backflow: Supply Line
• Name: OLIšHENDUS,KOMPRESSOR
• Manufacturer: AJU

• Forward- /Backflow: Supply Line
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Engine Code: CAYB
• Supplementary Article/Supplementary Info: with gaskets/seals
• for OE number: 03L253016
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: AJU

• Fitting Position: Inlet
• Manufacturer: NISSENS

• Material: Rubber with fabric lining
• Weight [kg]: 0.388
• Fitting Position: Charge Air Cooler, Left
• Section: Front Section
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1K0906627B
• Name: Survemuundur,turbokompressor
• Manufacturer: MD

• Voltage [V]: 12
• Operating Mode: Electric-pneumatic
• Valve type: Solenoid Valve
• Number of pins: 2
• Weight [kg]: 0.207
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 11.2009
• Climate Zones: for hot climate zones
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: Silicone
• Colour: black
• Hose Length [mm]: 320
• Inner Diameter 1 [mm]: 53
• Inner Diameter 2 [mm]: 53
• Observe broschure:
• Manufacturer: GATES PASKI PRZEWODY

• Construction Year to: 11.2009
• Climate Zones: for cold climate zones
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: Silicone
• Colour: black
• Hose Length [mm]: 295
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Observe broschure:
• Manufacturer: GATES

• for OE number: 5439-970-0098
• Name: Turbolaadija, laadija
• Manufacturer: MD

• Charge Type: Turbo
• Quality: Remanufactured
• Warranty: 2 years warranty

• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Quality: Remanufactured
• Charge Type: Turbo
• Warranty: 2 years warranty

• Charge Type: Turbo
• Quality: Remanufactured
• Warranty: 2 years warranty

• Supplementary Article/Supplementary Info: with attachment material
• Quality: Remanufactured
• Charge Type: Turbo
• Warranty: 2 years warranty

• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Quality: Remanufactured
• Charge Type: Turbo
• Warranty: 2 years warranty

• Charge Type: Turbo
• Quality: New
• Warranty: 2 years warranty
• Supplementary Article/Supplementary Info: Incl. Gasket Set

• Supplementary Article/Supplementary Info: with attachment material
• Quality: Remanufactured
• Charge Type: Turbo
• Warranty: 2 years warranty

• Warranty: 2 years warranty
• Charge Type: Turbo
• Quality: New
• Supplementary Article/Supplementary Info: with attachment material

• Charge Type: Exhaust Turbocharger, VTG turbocharger
• Supplementary Article/Supplementary Info: with gaskets/seals

• Charge Type: Turbo
• Quality: New
• Warranty: 2 years warranty
• Supplementary Article/Supplementary Info: Incl. Gasket Set

• Charge Type: Exhaust Turbocharger
• Cooling Type: Oil-cooled
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: Kompressor,lelaadimine
• Manufacturer: NIS

Technical Information: FIRST FIT - Includes gaskets, oil syringe and other parts when needed

• Warranty: 2 years warranty
• Charge Type: Turbo
• Quality: New
• Supplementary Article/Supplementary Info: with attachment material