• Lambda Sensor: Regulating Probe, Thread pre-greased
• Length [mm]: 642
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-012
• Manufacturer: NTY

• for OE number: 059 906 051 C, 076 906 051 B
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-AU-001
• Manufacturer: NTY

• Construction Year to: 04.2013
• Number of connectors: 3
• Material: Plastic
• for OE number: 059 906 051 C
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• General Information: pressure sensor
• Manufacturer: VIKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV333

• for OE number: 059906051C
• Quality: EQUIVALENT
• Manufacturer: MEAT&DORIA

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retro-fitted soot/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 076 906 051 B
• Manufacturer: TRUCKTEC

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• for OE number: 03G906051G
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 550813
• Number of circuits: 2
• Number of mounting bores: 1
• Manufacturer: ERA

• Number of connectors: 3
• Manufacturer: FAST

• Engine Code: CAYC
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.266
• Manufacturer: EPS

• for OE number: 03L 906 088 CC
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: Orange
• Fabrication Number: EGT-AU-000
• Cable Length [mm]: 735
• Manufacturer: NTY

• for OE number: 03L 906 088 AJ
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-AU-004
• Cable Length [mm]: 600
• Manufacturer: NTY

• Construction Year to: 04.2013
• Number of mounting bores: 1
• Number of pins: 3
• Connector Shape: D Shape
• Number of circuits: 2
• for OE number: 059906051C
• Weight [kg]: 0.022
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 04.2013
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 059 906 051 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Engine Code: CAYC
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Fitting Position: Soot Particulate Filter
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 590
• Overall Length [mm]: 700
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.11
• Manufacturer: VALEO

• Fitting Position: before soot particulate filter
• Number of pins: 2
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MAX

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409261
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Warranty: 5 years warranty
• Manufacturer: HITACHI

• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DELPHI

• Exhaust System: before turbocharger
• Number of circuits: 2
• Length [mm]: 860
• Manufacturer: ASHIKA

• Fitting Position: before exhaust turbocharger
• Connector Shape: D Shape
• Cable Length [mm]: 630
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: FAE

• Fitting Position: after soot particulate filter
• Component Number: G 527, G 648
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: Orange
• Sensor Type: NTC Sensor
• Cable Length [mm]: 718
• Spanner Size: 17
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAYC
• Voltage [V]: 12
• Cable Length [mm]: 722
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV003
• Manufacturer: ESEN SKV

• Engine Code: CAYC
• Voltage [V]: 12
• Cable Length [mm]: 595
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV002

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 635
• Overall Length [mm]: 770
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Weight [kg]: 0.09
• Manufacturer: VALEO

• for OE number: 03L 906 088 JG
• Thread Size: M14 x 1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: D Shape
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Socket colour: black
• Line insulation design: with thermal protection flexible insulating tubing
• Fabrication Number: EGT-VW-026
• Cable Length [mm]: 630
• Manufacturer: NTY
• Name: NTY EGT-VW-026

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• External Thread Size: M14 x 1,5
• Spanner Size: 17
• Number of connectors: 2
• Fitting Position: after soot particulate filter
• Cable Length [mm]: 724
• Weight [kg]: 0.07
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Cable Length [mm]: 600
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV146

• Exhaust System: after soot particulate filter
• Cable Length [mm]: 720
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS30139

• Fitting Position: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 601
• Thread Size: M14x1.5
• for OE number: 03L906088J
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Fitting Position: after soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 724
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Fitting Position: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 601
• Thread Size: M14x1.5
• for OE number: 03L906088AJ
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• External Thread Size: M14 x 1,5
• Spanner Size: 17
• Number of connectors: 2
• Fitting Position: after soot particulate filter
• Cable Length [mm]: 724
• Weight [kg]: 0.07
• Manufacturer: SWAG
• Name: SW 30 94 9305

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.2009
• Exhaust System: after soot particulate filter
• Socket colour: Orange
• Connector Shape: D Shape
• Overall Length [mm]: 870
• Thread Size: M14 x 1,5
• Weight [kg]: 0.06
• Voltage [V]: 5
• Number of pins: 2
• for OE number: 03L 906 088 CC
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 760
• Sensor Type: PTC
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 651
• Name: DE ES21079-12B1
• Manufacturer: DELPHI

• Cable Length [mm]: 766
• Thread Size: M14x1.5
• Socket colour: Orange
• Fitting Position: after soot particulate filter
• Manufacturer: FAE

• Fitting Position: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 595
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasitemperatuur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 765
• Sensor Type: PTC
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: MEY

• Fitting Position: after soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 715
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasitemperatuur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 10.2009
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Cable Length [mm]: 600
• for OE number: 03L 906 088 AJ
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Thread Size: M14x1,5
• Length [mm]: 710
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MAG

• Number of connectors: 2
• Fitting Position: before soot particulate filter
• Weight [kg]: 0.074
• for OE number: 03L 906 088 AJ
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1,5
• Length [mm]: 825
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MAG

• Number of connectors: 2
• Fitting Position: before soot particulate filter
• Weight [kg]: 0.074
• Manufacturer: SWAG
• Name: SW 30 94 8841

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAYC
• Vehicle Identification Number (VIN) from: 1K-9-400 001
• Line insulation design: with silicone-coated woven-fibre insulation
• for OE number: 03L 906 088 AJ
• Overall Length [mm]: 780
• Voltage [V]: 5
• Socket colour: brown
• Thread Size: M14 x 1,5
• Shape: angled
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 650, 644
• Sensor Type: PTC
• Number of pins: 2
• Housing Colour: brown
• Connector Shape: oval
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Weight [kg]: 0.058
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 600
• Number of pins: 2
• Manufacturer: DELPHI

• Cable Length [mm]: 646
• Thread Size: M14x1,5
• Socket colour: brown
• Fitting Position: before soot particulate filter
• Manufacturer: FAE

• Fitting Position: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 600
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358181031
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 724
• Number of pins: 2
• Warranty: 5 years warranty
• Fitting Position: after soot particulate filter
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: CAYC
• Construction Year from: 11.2009
• Number of pins: 2
• Cable Length [mm]: 730
• Socket colour: Orange
• Sensor Type: Closed-type Sensor
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter, after soot particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 802
• Number of pins: 2
• Version: AM
• Manufacturer: METZGER

• Engine Code: CAYC
• Fitting Position: before catalytic converter
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.552
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Engine Code: CAYC
• Vehicle Identification Number (VIN) from: 1K-9-400 001
• Operating Mode: Electric
• Voltage [V]: 12
• Conductor Number: 2
• Cable Length [mm]: 825
• Thread Size: M14 x 1,5 mm
• Fitting Position: after soot particulate filter
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: PIE

• Fitting Position: before exhaust turbocharger
• Line insulation design: with thermal protection flexible insulating tubing
• Length [mm]: 680
• Socket colour: black
• Thread Size: M14 x 1,5
• for OE number: 03L 906 088 JG
• Weight [kg]: 0.1
• Shape: Bent
• Tightening Torque [Nm]: 45
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: D Shape
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 770
• Number of pins: 2
• Fitting Depth [mm]: 40
• Connecting thread: M14x1,5
• Manufacturer: ERA

• Cable Length [mm]: 730
• Number of pins: 2
• Name: DE TS30344-12B1
• Manufacturer: DELPHI

• Cable Length [mm]: 650
• Number of pins: 2
• Fitting Depth [mm]: 40
• Connecting thread: M14x1.5
• Manufacturer: ERA

• Fitting Position: before exhaust turbocharger
• Number of pins: 2
• Cable Length [mm]: 780
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Engine Code: CAYC
• Number of pins: 2
• Fitting Position: before soot particulate filter
• Manufacturer: VDO

• Engine Code: CAYC
• Number of pins: 2
• Fitting Position: after soot particulate filter
• Name: Andur, heitgaasitemperatuur
• Manufacturer: VDO

• Engine Code: CAYC
• Vehicle Identification Number (VIN) from: 1K-9-400 001
• Operating Mode: Electric
• Voltage [V]: 12
• Conductor Number: 2
• Cable Length [mm]: 710
• Thread Size: M14 x 1,5 mm
• Fitting Position: before soot particulate filter
• Manufacturer: PIERBURG

• Construction Year to: 04.2013
• Fitting Position: after soot particulate filter
• Cable Length [mm]: 724
• Manufacturer: BOSCH

• Exhaust System: before turbocharger
• External Thread Size: M14 x 1,5
• Cable Length [mm]: 680
• Line insulation design: with thermal protection flexible insulating tubing
• Number of pins: 2
• Socket colour: black
• Manufacturer: AIC