• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: transmission sided
• Joint Type: Disc Joint
• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 34
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Diameter 1 [mm]: 90
• Manufacturer: BGA

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Diameter 1 [mm]: 22
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle, Wheel Side, Front Axle Left
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.6
• Outer Diameter [mm]: 89.9
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: transmission sided, Front Axle
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Manufacturer: LPR

• Internal Toothing wheel side: 28
• Internal Toothing differential side, conn. to transmission: 28
• Diameter 1 [mm]: 108
• Outer Diameter 2 [mm]: 108
• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 32
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Diameter 1 [mm]: 28
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fabrication Number: NPW-VW-002
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Fabrication Number: NPZ-SK-009
• Manufacturer: NTY
• Name: NTY NPZ-SK-009

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Manual Transmission
• Joint Type: CV Joint
• Supplementary Article/Supplementary Info: with attachment material
• Lubrication: with grease lubrication
• Supplementary Article/Info 2: with bellow
• Wheel-side joint diameter [mm]: 90
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fabrication Number: NPW-VW-013
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.6
• Outer Diameter [mm]: 89.9
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Front Axle, Wheel Side
• Parameter: DP2110.10.1118
• Length [mm]: 95.5
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Manufacturer: DRIVE

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Length [mm]: 96.5
• Outer Diameter [mm]: 90
• External Thread Size: M16 x 1,5
• External Toothing wheel side: 36
• Internal Toothing differential side, conn. to transmission: 30
• Outer Diameter 1 [mm]: 59.5
• Weight [kg]: 1.8
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2014
• Transmission Type: Automatic Transmission
• Thread Size: M20x1,5
• Bellows Material: Thermoplast
• Drive Shaft: without ABS ring
• Weight [kg]: 1.897
• Manufacturer: VAICO

Fitting Position: Front Axle Left, Front Axle Right, Wheel Side, Front Axle General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Wheel Side, Front Axle
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Technical Information Number: Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Wheel Side, Front Axle
• Parameter: DP2110.10.1538
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Manufacturer: DRIVE

• Quantity: 2
• Fitting Position: Front Axle
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• General Information: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Transmission Type: Dual-Clutch Transmission
• Number of Gears: 7 Speed
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 97.9
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Additional information: 15-1463MET
• Lisainfo: 15-1463MET

• Number of Gears: 6 Speed
• Fitting Position: Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 90
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Lisainfo: 15-1467 MET
• Additional information: 15-1467 MET

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 95.5
• Outer Diameter [mm]: 90
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Transmission Type: Automatic Transmission
• Fitting Position: Wheel Side, Front Axle
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• External Toothing wheel side: 36
• Seal Diameter [mm]: 59.5
• Manufacturer: LPR

• Quantity: 2
• Fitting Position: Wheel Side
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• General Information: c.v.joint; outer; Inner tooth30mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Bellows Material: Thermoplast
• Length [mm]: 32
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 771072030

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Outer Diameter [mm]: 90
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Manufacturer: LPR
• Additional information: KAD534 LPR
• Lisainfo: KAD534 LPR

• Thread Size: M16x1,5
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Version: 6 balls
• Length 2 [mm]: 106
• Fitting Position: outer
• Name: SN OJK54.004
• Manufacturer: SNR

• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.509
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 1.932
• Internal Toothing differential side, conn. to transmission: 33
• Seal Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Disc Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Thread Size: M16x1,5
• Fitting Position: outer
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Length 2 [mm]: 95.5
• Internal Toothing wheel side: 30
• Version: 6 balls
• Name: SN OJK54.003
• Manufacturer: SNR

Vehicle Identification Number (VIN): [;1Z-7A153 447], [;1Z-82024 977], [;1Z-88008 976], [;1Z-8B150 591]

• Vehicle Identification Number (VIN): [1M-3-109 001;], [1M-3-109001;], [8L-X-098488;]
• Fitting Position: Right, Left, Front Axle
• Joint Type: Disc Joint
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Name: SN IJK54.006
• Manufacturer: SNR

• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.092
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 89
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.46
• Internal Toothing differential side, conn. to transmission: 28
• Seal Diameter [mm]: 108
• Outer Diameter [mm]: 107
• Joint Type: Disc Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 11
• Packaging height [cm]: 11
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 100
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 90
• Length [mm]: 95
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Manufacturer: LOBRO

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: Disc Joint
• Internal Toothing differential side, conn. to transmission: 28
• Machined: without groove in internal component
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Supplementary Article/Info 2: with cap
• Bore Ø [mm]: 10.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 94
• New Part:
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 106
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!