• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 82
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, without bearing, front
• Additional information: Bearing for strut, without bearing, front

• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle Left, Front Axle Right
• OE-numbri jaoks: 7201592
• Manufacturer: GSP

• Fabrication Number: AD-VW-010
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Siseläbimõõt [mm]: 14
• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,056
• Manufacturer: TEDGUM
• Name: TG 00722859

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 1J0412249
• Manufacturer: SASIC

• Installatsiooni pool: esisild vasakul, esisild paremal
• põhikeha materjal: Raudplekk
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Esisild
• Kaal (kg): 0,091
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Name: Laager - K„„ndmik. VW P. GOLF 4 Z O½YSKIEM
• Manufacturer: MAX

• Quantity per packing unit: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Top mount left, right

• Installatsiooni pool: esisild vasakul
• Kaal (g): 65
• Laagritootja: IMPERGOM
• Jämedus/Tugevus (mm): 13,5
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 45
• Name: IM 32295/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: 3RG

• Laius (mm): 13,5
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 45
• Materjal: Plastik
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,08
• Manufacturer: FEBI BILSTEIN
• Additional information: FE01111
• Lisainfo: FE01111

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 45
• Kõrgus (mm): 13,5
• Installatsiooni pool: esisild vasakul, esisild paremal
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Laius (mm): 14
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 45
• Materjal: Plastik
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,08
• Manufacturer: BLUE PRINT ZAWIESZENIE

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: G01, G02, G03, G06, G10, G12
• Installatsiooni pool: esisild vasakul, esisild paremal, üleval
• Laagritüüp: Kummi-metalllaager
• Hulk telje kohta: 2
• alternatiivne remondikomplekt: 108 561
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Piirangutega toode/piirangu info 2: ohne Wälzlager
• ainult paarina välja vahetada:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Laius (mm): 13,5
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 45
• Materjal: Plastik
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,08
• Name: SW 30 54 0001
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• OE-numbri jaoks: 1J0 412 331 B
• Manufacturer: GSP

• Fitting Position: Front Axle
• SVHC: SVHS aineid ei esine
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-VW-006
• Manufacturer: NTY
• Name: NTY AD-VW-006

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 45
• Inner Diameter [mm]: 14
• Material: Plastic
• for OE number: 1J0 412 249
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"

• Välisläbimõõt 1 [mm]: 65
• Kõrgus (mm): 53
• Välisläbimõõt 2 [mm]: 82
• Installatsiooni pool: esisild paremal
• Name: SN KBLF410.82
• Manufacturer: NTN-SNR

Vehicle Identification Number (VIN): [5J-93120 133;], [5J-95032 165;], [5J-9A508 237;], [5J-9B505 016;], [5J-9B601 132;], [5J-9K506 834;]

• Vehicle Identification Number (VIN): [5J-95032 165;], [5J-9B601 132;]
• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Front Axle
• Välisläbimõõt 1 [mm]: 45
• Laius 1 (mm): 13
• Siseläbimõõt 1 [mm]: 14
• Manufacturer: SNR /NTN-SNR/
• Name: SN M254.01

• Material: Rubber
• Fitting Position: Upper, Rear Axle both sides
• Outer Diameter [mm]: 75
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• for PR number: 1JA, 1JR, 1JB
• Block Separation:
• Quantity per packing unit: 2
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension

• Fitting Position: Front Axle
• Manufacturer: OYODO

• Installatsiooni pool: Esisild
• Manufacturer: KAMOKA AMORTYZATORY

• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info 2: ilma laagrita
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: MEY

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• OE-numbri jaoks: 6R0 412 249
• Manufacturer: LMI

Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Weight [kg]: 0.237
• Required quantity: 2
• Thickness [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• not for PR number: G13
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kõrgus (mm): 53
• Siseläbimõõt [mm]: 26
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Manufacturer: BGA

• Fitting Position: Front Axle
• Weight [kg]: 0.28
• Material: Rubber/Metal
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 83
• Weight [g]: 280
• Supplementary Article/Info 2: with rolling bearing
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• not for PR number: G13
• Kõrgus (mm): 54
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 83
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,237
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Hooldusinfot jälgida:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: FEB
• Additional information: FE09227
• Lisainfo: FE09227

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• OE-numbri jaoks: 6R0 412 249
• Name: Laager,amorditugilaager
• Manufacturer: SAA

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Laagritüüp: Kummipuks
• Installatsiooni pool: Esisild
• OE-numbri jaoks: 1J0412331C
• Manufacturer: SASIC

• Weight [kg]: 0.237
• Fitting Position: Front Axle
• Thickness [mm]: 54
• Required quantity: 2
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle both sides, Front Axle
• Name: CFD 150201
• Manufacturer: DACO

• not for PR number: G13
• Kõrgus (mm): 54
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 83
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,237
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Name: SW 30 54 0012
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 1J0412331
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Materjal: Kumm/metall
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 83
• Kaal (g): 273
• Piirangutega toode/piirangu info 2: ilma laagrita
• Jämedus/Tugevus (mm): 54
• Name: IM 32354
• Manufacturer: ORIGINAL IMPERIUM

• Hulk telje kohta: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• alternatiivne remondikomplekt: 802 270, 802 697
• OE-numbri jaoks: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 9
• Manufacturer: SAA

• Hulk telje kohta: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• alternatiivne remondikomplekt: 25346 01, 36957 01
• OE-numbri jaoks: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 (BEZ O½YSKA)
• Manufacturer: LMI

• Fitting Position: Front Axle
• SVHC: SVHS aineid ei esine
• Name: LU 815008930
• Manufacturer: FAG

• vajaminev tükihulk: 2
• Piirangutega toode/piirangu info 2: koos kaitsekattega/kattekumm
• Installatsiooni pool: esisild paremal, esisild vasakul
• Kaal (kg): 0,126
• OE-numbri jaoks: 1S0 412 303, 357 413 175 A
• Manufacturer: TEDGUM_TD

• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaitsekattega/kattekumm
• Kaal (kg): 0,092
• vajaminev tükihulk: 2
• OE-numbri jaoks: 1S0 412 303 A, 357 413 175 A
• Manufacturer: TEDGUM_TD

• Installatsiooni pool: Tagasild
• Manufacturer: KAMOKA

• not for PR number: G13
• Siseläbimõõt [mm]: 26
• Kõrgus (mm): 53
• Välisläbimõõt [mm]: 83
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,317
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM

• Fitting Position: Front Axle
• General Information: Rubber and dust cover kit; front
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Piirangutega toode/piirangu info 2: koos kaitsekattega/kattekumm
• Kaal (kg): 0,126
• vajaminev tükihulk: 2
• Manufacturer: TEDGUM

• Fitting Position: Front Axle
• General Information: Rubber and dust cover kit; front
• Manufacturer: VIKA

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 1H0412303B
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Materjal: Kumm/metall
• Piirangutega toode/piirangu info 2: koos laagriga
• vajaminev tükihulk: 2
• Kõrgus (mm): 53
• Välisläbimõõt [mm]: 83
• Tsentri läbimõõt (mm): 14,2
• Manufacturer: TRW AMORTYZATORY

OE-numbri jaoks: 1J0 412 249, 1J0 412 331 B, 1J0 412 331 C, 357 412 249 A, 6K0 413 031 B

• vajaminev tükihulk: 1
• Osade arv [-osaline]: 4
• OE-numbri jaoks: 1S0 412 303 A, 357 413 175 A
• Kaal (kg): 0,184
• Installatsiooni pool: esisild paremal, esisild vasakul
• Piirangutega toode/piirangu info 2: koos kaitsekattega/kattekumm
• Manufacturer: TED

Name: ZESTAW MONTA½OWY AMORTYZATORA AUDI P. A1, POLO 1.2TSI-2.0TDI 03.08- (ODBOJEONY)

• not for PR number: G13
• Kõrgus (mm): 53
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 83
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,317
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Name: SW 30 55 0008
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Hulk telje kohta: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: LMI

Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM

• not for PR number: G13
• Inner Diameter [mm]: 14
• for OE number: 1J0 412 331 C S1
• Material: Rubber/Metal
• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 83
• Supplementary Article/Info 2: with bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild
• Manufacturer: KYB

Name: Laager - K„„ndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,

• Installatsiooni pool: Esisild
• Manufacturer: KAMOKA AMORTYZATORY

• Osade arv [-osaline]: 2
• Kaal (kg): 0,252
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos kaitsekattega/kattekumm
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Manufacturer: TED

Name: ZESTAW MONTA½OWY AMORTYZATORA SEAT T. MII/ CITIGO/ LOAD UP/ UP 1,0/1,0CNG/ ELECTRIC 11- (ODBOJEONY)

• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos kaitsekattega/kattekumm
• Osade arv [-osaline]: 4
• OE-numbri jaoks: 357 413 175 A, 1S0 412 303
• Kaal (kg): 0,252
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: TED

Name: ZESTAW MONTA½OWY AMORTYZATORA SEAT P. MII (10/11-)/ SKODA CITIGO (10/11-)/ VW LOAD UP (12/14-), UP (08/11-) (ODBOJEONY)

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

• Suspension: for vehicles without sports suspension
• Installatsiooni pool: Esisild
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Osade arv [-osaline]: 2
• Soovitatava eritööriista tootenumber: Clas : OM1112, Clas : OP3231
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: SNR
• Name: SN KB657.08

• Fitting Position: Front Axle
• Kaal (kg): 0,4
• Piirangutega toode/piirangu info 2: koos laagriga
• Garantii: 5 aastat garantii
• pakendi pikkus [cm]: 8,1
• pakendi laius [cm]: 8,1
• pakendi kõrgus [cm]: 9
• Manufacturer: MONROE

• Installatsiooni pool: Tagasild
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Installatsiooni pool: Tagasild
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Model Year from: 2017
• Installatsiooni pool: Esisild
• Kaal (kg): 0,308
• pakendi pikkus [cm]: 20,5
• pakendi laius [cm]: 15,5
• pakendi kõrgus [cm]: 8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• General Information: Rubber and dust cover kit; rear
• Manufacturer: VIKA

• for PR number: G13
• Materjal: PU (Polyurethan), Kumm
• Installatsiooni pool: Esisild
• Kaal (kg): 0,201
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Installatsiooni pool: Tagasild
• Hulgaühik: Komplekt
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• for PR number: G13
• Materjal: PU (Polyurethan), Kumm
• Installatsiooni pool: Esisild
• Kaal (kg): 0,201
• Name: SW 30 56 0029
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Manufacturer: DENCKERMANN AMORTYZATORY