• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fabrication Number: AD-VW-010
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7201592
• Manufacturer: GSP

• Fitting Position: Front Axle
• for OE number: 1J0412249
• Manufacturer: SASIC

• Required quantity: 2
• Inner Diameter [mm]: 14
• Fitting Position: Front Axle
• Manufacturer: TEDGUM
• Name: TG 00722859

• Fitting Position: Front Axle Left, Front Axle Right
• Base body material: Sheet Steel
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Weight [g]: 65
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Name: IM 32295/1
• Manufacturer: ORIGINAL IMPERIUM

• Width [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: FEB
• Additional information: FE01111
• Lisainfo: FE01111

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Width [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Name: SW 30 54 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0512149B
• Fitting Position: Rear Axle
• Weight [g]: 104
• Name: IM 37242
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 412 331 B
• Manufacturer: GSP

• for PR number: G01, G02, G03, G06, G10, G12
• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Alternative Repair Kit: 108 561
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 45
• Inner Diameter [mm]: 14
• Material: Plastic
• for OE number: 1J0 412 249
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-VW-006
• Manufacturer: NTY

• Fitting Position: Right, Front Axle
• Outer Diameter 1 [mm]: 65
• Height [mm]: 53
• Outer Diameter 2 [mm]: 82
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.82

Vehicle Identification Number (VIN): [5J-93120 133;], [5J-95032 165;], [5J-9A508 237;], [5J-9B505 016;], [5J-9B601 132;], [5J-9K506 834;]

• Material: Rubber
• Fitting Position: Upper, Rear Axle both sides
• Outer Diameter [mm]: 75
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN): [5J-95032 165;], [5J-9B601 132;]
• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Front Axle
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 13
• Inner Diameter 1 [mm]: 14
• Name: SN M254.01
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• not for PR number: G13
• Height [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: FEB
• Additional information: FE09227
• Lisainfo: FE09227

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• not for PR number: G13
• Height [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 54 0012

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0412331
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Weight [g]: 285
• Supplementary Article/Info 2: without bearing
• Thickness [mm]: 54
• Name: IM 32354
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• for OE number: 1J0412331C
• Manufacturer: SASIC

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 25346 01, 36957 01
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 (BEZ O½YSKA)
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 815008930
• Manufacturer: FAG

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 802 270, 802 697
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 9
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Required quantity: 2
• Supplementary Article/Info 2: with protective cap/bellow
• Manufacturer: TEDGUM_TD

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Required quantity: 2
• Supplementary Article/Info 2: with protective cap/bellow
• Manufacturer: TEDGUM_TD

• not for PR number: G13
• Height [mm]: 53
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.317
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM

• Fitting Position: Front Axle
• for OE number: 1H0412303B
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: with bearing
• Required quantity: 2
• Height [mm]: 53
• Outer Diameter [mm]: 83
• Centering Diameter [mm]: 14.2
• Manufacturer: TRW

for OE number: 1J0 412 249, 1J0 412 331 B, 1J0 412 331 C, 357 412 249 A, 6K0 413 031 B SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• not for PR number: G13
• Inner Diameter [mm]: 26
• Height [mm]: 53
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.317
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: SWAG
• Name: SW 30 55 0008

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB657.08

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Technical Information: Suspension mounting + separated suspension bearing
• Manufacturer: KYB

Name: Laager - K„„ndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• not for PR number: G13
• Inner Diameter [mm]: 14
• for OE number: 1J0 412 331 C S1
• Material: Rubber/Metal
• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 83
• Supplementary Article/Info 2: with bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• for PR number: G13
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.201
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: G13
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.201
• Name: SW 30 56 0029
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• Fitting Position: Front Axle
• Weight [kg]: 0.352
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Packaging height [cm]: 5.2
• Manufacturer: FEBEST

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without sports suspension
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

• Suspension: for vehicles without sports suspension
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Manufacturer: KYB
• Name: KY 910221

• for PR number: 1JA, 1JR, 1JB
• Block Separation:
• Thickness [mm]: 127
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.35
• Name: SW 33 10 4590
• Manufacturer: SWAG

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1JA, 1JR, 1JB
• Block Separation:
• Thickness [mm]: 127
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.35
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.