• Fitting Position: Rear Axle
• Inner Diameter [mm]: 67.9
• Width [mm]: 11.5
• Outer Diameter [mm]: 84
• Number of Teeth, ABS ring: 26
• Lisainfo: DACIA, RENAULT
• Additional information: DACIA, RENAULT

• Fitting Position: Rear Axle
• Width [mm]: 11.5
• Outer Diameter [mm]: 84
• Number of Teeth: 26
• Inner Diameter [mm]: 68
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-RE-004
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-RE-012
• paired article number: HCA-RE-013
• Manufacturer: NTY

• Construction Year to: 12.2012
• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 67.9
• Width [mm]: 11.5
• Number of Teeth: 26
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left Rear
• Cable Length [mm]: 438
• Connector Shape: round
• Manufacturer: JAPKO

• Fitting Position: Right Rear
• Cable Length [mm]: 438
• Connector Shape: round
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Fabrication Number: HCA-RE-041
• Manufacturer: NTY

• Construction Year to: 12.2015
• Fitting Position: Rear Axle Right
• Sensor Type: Hall Sensor
• Length [mm]: 495
• Number of pins: 2
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-RE-013
• paired article number: HCA-RE-012
• Manufacturer: NTY

• Engine Code: K4M 690
• Cable Length [mm]: 622
• Sensor Type: Active sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN): A, B, F, H, J, M, T, Z
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 590
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle
• for OE number: 479101292R
• Number of pins: 2
• Name: MM MWSS017
• Manufacturer: MAGNETI MARELLI

• Engine Code: K4M 690
• Sensor Type: Hall Sensor, Active sensor
• Overall Length [mm]: 494
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Engine Code: K4M 690
• Sensor Type: Hall Sensor, Active sensor
• Overall Length [mm]: 479
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Construction Year from: 12.2007
• Fitting Position: Rear Axle Left
• paired article number: 20-0434
• Length [mm]: 530
• for OE number: 47 90 005 27R
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 11.5
• Inner Diameter [mm]: 67.9
• Number of Teeth, ABS ring: 26
• Net weight [kg]: 0.09
• Name: ANDUR,ABS
• Manufacturer: NK

• Fitting Position: Rear Axle Right
• Cable Length [mm]: 425
• for OE number: 8200254688
• Number of pins: 2
• Number of mounting bores: 1
• Name: MM MWSS097
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 12.2007
• Fitting Position: Rear Axle Right
• paired article number: 20-0433
• Length [mm]: 520
• for OE number: 47 90 073 80R
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Production number to: A105135
• Fitting Position: Rear Axle Right
• paired article number: 701 874
• Supplementary Article/Info 2: with cable
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production number to: A105135
• Fitting Position: Rear Axle Left
• paired article number: 701 873
• Supplementary Article/Info 2: with cable
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 12.2015
• Fitting Position: Rear Axle Left
• Sensor Type: Hall Sensor
• Length [mm]: 495
• Number of pins: 2
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Construction Year to: 12.2007
• Fitting Position: Rear Axle Right
• Required quantity: 1
• Cable Length [mm]: 491
• Fitting Depth [mm]: 28.3
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Construction Year to: 12.2015
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 564
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Construction Year from: 12.2007
• paired article number: 106103
• Length [mm]: 520
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.036
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 02.2008
• Sensor Type: Active sensor
• Cable Length [mm]: 505
• Number of pins: 2
• Fitting Position: Rear Axle Left
• Name: Andur, rattap””rete arv
• Manufacturer: MEY

• Fitting Position: Rear Axle Right
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 475
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 470
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 01.2008
• Fitting Position: Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 508
• Socket colour: black

• Construction Year from: 01.2008
• Fitting Position: Rear Axle Left
• Sensor Type: Active sensor
• Length [mm]: 505
• Socket colour: black

• Construction Year from: 12.2007
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.09
• Fitting Position: Rear Axle Right
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Right
• Construction Year from: 01.2008
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 508
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 26
• Inner Diameter [mm]: 68
• Width [mm]: 11.5
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Length [mm]: 450
• Number of pins: 2
• Plug Type: Female
• Connector Shape: round
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.07
• Colour: white
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV117

• Fitting Position: Rear Axle
• Length [mm]: 460
• Number of pins: 2
• Plug Type: Female
• Connector Shape: round
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.07
• Colour: white
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 06.2013
• Fitting Position: Front Axle
• Cable Length [m]: 0.58
• Number of connectors: 2
• Rated Voltage [V]: 12
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Fitting Position: Rear Axle Left
• Cable Length [mm]: 445
• Sensor Type: Active sensor
• Manufacturer: ERA

• Fitting Position: Rear Axle, Rear Axle Left
• paired article number: GH-713912H
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle Left
• Construction Year from: 02.2008
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 455
• Manufacturer: DELPHI
• Name: DE SS20364

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 630
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20064

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 585
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle Right
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Right, Rear Axle
• Cable Length [mm]: 534
• Name: SN ASB155.51
• Manufacturer: NTN-SNR

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 508
• Fitting Position: Rear Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0022

• Fitting Position: Rear Axle Left
• Construction Year to: 02.2008
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 480
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Cable Length [mm]: 644
• Sensor Type: Hall Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Fitting Position: Front Axle
• Manufacturer: FAE

• Fitting Position: Right Rear
• Cable Length [mm]: 438
• Connector Shape: round
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 461
• Fitting Position: Rear Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0025

• Fitting Position: Right, Rear Axle
• Cable Length [mm]: 505
• Manufacturer: SNR /NTN-SNR/
• Name: SN ASB155.34

• Fitting Position: Rear Axle, Rear Axle Right
• paired article number: GH-713912V
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle Right
• Construction Year from: 01.2008
• Overall Length [mm]: 545
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 450
• paired article number: 30804
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Vehicle Identification Number (VIN): A, B, F, H, J, M, T, Z
• Braking/Drive Dynamics: for vehicles with ABS
• Sensor Type: Hall Sensor
• Cable Length [mm]: 590
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Required quantity: 1
• Construction Year from: 01.2008
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Construction Year from: 01.2008
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year from: 01.2008
• Fitting Position: Rear Axle Left
• Required quantity: 1
• Cable Length [mm]: 509
• Fitting Depth [mm]: 28
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Length [mm]: 580
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.07
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV118

• Cable Length [mm]: 644
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR /NTN-SNR/
• Name: SN ASB155.06

• Fitting Position: Rear Axle Left
• Construction Year from: 01.2008
• Overall Length [mm]: 545
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 450
• paired article number: 31272
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Construction Year to: 02.2008
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 475
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20113

• Engine Code: K4M 690
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Cable Length [mm]: 634
• Manufacturer: FACET

• Engine Code: K4M 690
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Cable Length [mm]: 634
• Name: EP 1.960.056
• Manufacturer: EPS

• Fitting Position: Left, Rear Axle
• Cable Length [mm]: 505
• Name: SN ASB155.33
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Overall Length [mm]: 650
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 578
• paired article number: 30683
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Number of pins: 2
• Cable Length [mm]: 441
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0115

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 445
• Fitting Position: Rear Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0116

• Fitting Position: Left, Rear Axle
• Cable Length [mm]: 530
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Rear Axle Left
• Length [mm]: 534
• Sensor Type: Active sensor
• paired article number: GBS2558
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 12.2007
• paired article number: 104219
• Length [mm]: 530
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 455
• Weight [kg]: 0.038
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 670
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 12.2015
• Fitting Position: Rear Axle Left
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 494
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Fitting Position: Rear Axle Left
• Length [mm]: 505
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Rear Axle Right
• Length [mm]: 534
• MAPP code available:
• Manufacturer: ATE