• Length [mm]: 75
• Width [mm]: 50
• Height [mm]: 75
• Rotation Direction: Anticlockwise rotation
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECP-FT-006
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Outer Diameter [mm]: 17
• Housing Diameter [mm]: 12
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV693
• Manufacturer: ESEN SKV

• Fitting Position: Intake Manifold
• Connector Shape: rectangular
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: K4M 690
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Manufacturer: FACET

• Engine Code: K4M 690
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 3
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 21
• for OE number: 8200561449
• Manufacturer: MEAT & DORIA

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• for OE number: 82 00 719 629
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Fabrication Number: ECM-RE-003
• Manufacturer: NTY
• Name: NTY ECM-RE-003

• Manufacturer: VERNET
• Additional information: AS0006 VERNET
• Lisainfo: AS0006 VERNET

• Number of pins: 2
• Connector Shape: rectangular
• Colour: grey
• for OE number: 19201J
• Manufacturer: MEAT&DORIA

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: K4M 690
• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 7714824, 77 01 044 743
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Thread Size: M 12x1,25
• Spanner Size: 24
• Number of pins: 2
• Fabrication Number: ESS-NS-004
• Manufacturer: NTY

• Pressure from [kPA]: 20
• Pressure to [kPA]: 10
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: K4M 690
• Number of pins: 3
• Operating Mode: Mechanical
• Rotation Direction: Anticlockwise rotation
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: DLP

• Connector Shape: oval
• Number of pins: 3
• Fitting Position: Throttle Housing
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: K4M 690
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 21
• Manufacturer: FACET

• Engine Code: K4M 690
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: K4M 690
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Name: OHUSURVEANDUR,
• Manufacturer: MAX

• Construction Year to: 06.2013
• Required quantity: 1
• Number of pins: 2
• for manufacturer number: 6PT 009 109-221
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M 12x1,5
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: K4M 690
• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 9945634
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Connector Shape: oval
• Number of pins: 3
• for OE number: 8200 719 629
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA RENAULT CLIO 2,0 16V 00-
• Manufacturer: BRM

• Construction Year to: 06.2013
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Quality: OE EQUIVALENT
• for OE number: 8200719629
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Manufacturer: JPN

• Number of pins: 3
• Quality: OE EQUIVALENT
• for OE number: 55209194
• Manufacturer: MEAT&DORIA

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.52
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: MS0119 VERNET
• Lisainfo: MS0119 VERNET

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 3
• Weight [kg]: 0.012
• for OE number: 25085-00Q0B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: K4M 690
• Required quantity: 1
• Thread Size: M12x1,25
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: K4M 690
• Required quantity: 1
• Thread Size: M12x1,25
• Spanner Size: 24
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: K4M690, K4M696, K4M697
• Required quantity: 1
• Diameter [mm]: 12.6
• Manufacturer: VALEO

• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 2206000Q0A
• Manufacturer: MEAT & DORIA

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: FAST

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Length [mm]: 470
• Fabrication Number: ESL-RE-008
• Manufacturer: NTY

• Engine Code: K4M 690, K4M 696, K4M 697
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Number of pins: 3
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• for OE number: 223650001R
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Pressure from [kPA]: 20
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Engine Code: K4M 690
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.52
• Output Voltage, up to [V]: 4.78
• Manufacturer: FACET

• Engine Code: K4M 690
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.52
• Output Voltage, up to [V]: 4.78
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 472
• Name: DE ES20515-12B1
• Manufacturer: DELPHI

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.052
• Manufacturer: ERA

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Engine Code: K4M 690, K4M 696, K4M 697
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 445
• Name: Lambda andur
• Manufacturer: MAX

• Construction Year to: 06.2013
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Length [mm]: 470
• Number of circuits: 4
• Name: Lambda andur
• Manufacturer: MAX

• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 470
• Number of connectors: 4
• Manufacturer: VERNET

• Conductor Number: 4
• Resistor [Ohm]: 6
• Length [mm]: 300
• Number of circuits: 4
• Cable Length [mm]: 300
• Oxygen Sensor: Heated
• Name: Lambda andur
• Manufacturer: MAG

• Number of pins: 3
• Colour: black
• Manufacturer: METZGER

• Engine Code: K4M 690
• Name: EP 1.995.083
• Manufacturer: EPS

• Construction Year to: 06.2013
• Required quantity: 1
• Supplementary Article/Info 2: without cable
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PP009400281

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 470
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
TWINGO (C06/), 03.93
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
TWINGO (C06/), 03.93
(kvaliteediklass: PJ)"

• Engine Code: K4M 690
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 480
• Manufacturer: DELPHI
• Name: DE ES20511-12B1

• Engine Code: K4M 690
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 250
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: EP 1.997.281
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Transmission Type: Manual Transmission
• for OE number: 60 01 548 477, 82 00 386 506
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 6
• Connector Shape: rectangular
• Number of mounting bores: 3
• Fabrication Number: EAP-RE-000
• Manufacturer: NTY
• Name: NTY EAP-RE-000

• Engine Code: K4M 690
• Fitting Position: before catalytic converter
• Required quantity: 1
• Length [mm]: 470
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.997.594
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Number of pins: 4
• Connector Shape: oval
• Cable Length [mm]: 150
• for OE number: 7700103504
• Manufacturer: MEAT&DORIA

• Construction Year to: 06.2013
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 395
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: K4M 696
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.083
• Name: SW 33 10 4184
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: K4M 696
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 450
• Weight [kg]: 0.088
• Name: SW 33 10 3186
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 470
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV681

• Construction Year to: 11.2012
• Engine Code: K4M.6.90,K4M.6.96
• Name: DETONATSIOONIANDUR
• Manufacturer: VAL

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 450
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 250
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 77 00 103 504
• Number of circuits: 4
• Overall Length [mm]: 480
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 77 00 103 504
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Construction Year to: 12.2015
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 60 01 549 061
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Finger probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Engine Number from: 100104
• for OE number: 8201071311
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 490
• Number of pins: 4
• Weight [g]: 89
• Gross Weight [g]: 119
• Name: DN DOX-1731
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor

• Construction Year to: 06.2013
• Required quantity: 1
• Number of pins: 2
• Tightening Torque [Nm]: 22
• Spanner Size: 24
• Thread Size: M12 x 1,25
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108881
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 11.2012
• Engine Code: K4M.6.90,K4M.6.96
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 300
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368065
• Manufacturer: VALEO