• Number of pins: 3
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Fabrication Number: ECT-RE-006
• Name: NTY ECT-RE-006
• Manufacturer: NTY

• Pressure [bar]: 0.35
• Housing Colour: black
• Thread Size: M14*1.5
• Diameter [mm]: 54
• Spanner Size: 21
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90071

• Switch Pressure [bar]: 0.3
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Engine Code: K7M 800
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 2
• Connector Shape: rectangular
• Weight [kg]: 0.01
• Outer Diameter [mm]: 17
• Housing Diameter [mm]: 12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Sensor Type: Passive sensor
• for OE number: 9118368
• Manufacturer: KAMOKA

• Fitting Position: Intake Manifold
• Connector Shape: rectangular
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-025
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fabrication Number: ECP-RE-011
• Manufacturer: NTY

• Thread Size: M12x1.5
• Spanner Size: 21
• Manufacturer: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 226306024R
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Connector Shape: rectangular
• Colour: grey
• for OE number: 1920 1J
• Manufacturer: MEAT&DORIA

• Manufacturer: VERNET
• Additional information: AS0006 VERNET
• Lisainfo: AS0006 VERNET

• Spanner Size: 21 mm
• Sensor Type: NTC Sensor
• Number of pins: 3
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• for model code: Black Plug
• Number of pins: 2
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV535

• Construction Year to: 11.2012
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 250
• Weight [kg]: 0.05
• Manufacturer: VALEO

• Engine Code: K7M 800
• Number of pins: 2
• Manufacturer: ERA

• for model code: Black Plug
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
MEGANE I (BA0/1/), 0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MEGANE I (BA0/1/), 0
(kvaliteediklass: PJ)"

• Housing Colour: black
• Number of pins: 3
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10416

• Construction Year to: 11.2012
• Alternatively:
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 250
• Weight [kg]: 0.05
• Manufacturer: VALEO
• Name: VA 254010

• Connector Shape: oval
• Material: Plastic
• Number of pins: 3
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S21
• Thread Size: M12*1,5
• Name: NI 207001
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Construction Year to: 11.2012
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: K7M 800
• Construction Year to: 12.2011
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year to: 11.2012
• Observe technical data:
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 250
• Weight [kg]: 0.07
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Required quantity: 1
• Number of pins: 2
• for manufacturer number: 6PT 009 109-221
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12x1,5
• Spanner Size: 21
• Sensor Type: NTC Sensor
• Number of pins: 3
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107131

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: K7M 800
• Construction Year to: 12.2011
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 3
• Manufacturer: MEYLE

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Construction Year from: 01.2012
• Connector Shape: rectangular
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Manufacturer: DELPHI

• Construction Year to: 12.2012
• Thread Size: M12 x 1,5
• Spanner Size: 21
• Number of pins: 3
• Colour Coding: black
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K7M 800
• Construction Year from: 12.2011
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: EP 1.830.365
• Manufacturer: EPS

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: K7M 800
• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 82 00 680 689, 22060 00Q0A
• Manufacturer: MEAT&DORIA

• Height [mm]: 18
• Resistor [Ohm]: 200
• Number of connectors: 2
• Manufacturer: VERNET

• Engine Code: K7M 800
• Thread Size: M12x1,25
• Spanner Size: 24
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: K7M 800
• Construction Year from: 12.2011
• Sensor Type: NTC Sensor
• Thread Size: M21x1,5
• Spanner Size: 21
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 3
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: FAST

• Length [mm]: 434
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-RE-002
• Manufacturer: NTY

• Number of pins: 2
• for OE number: 82 00 772 182
• Manufacturer: FAE

• Construction Year to: 11.2012
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: round
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 250
• Weight [kg]: 0.08
• Name: VA 254016
• Manufacturer: VALEO

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Connector Shape: rectangular
• Resistance [Ohm]: 200
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Code Letter: ZE17
• Number of pins: 2
• Resistor [Ohm]: 225
• Length [mm]: 24
• Connector Shape: angular
• Manufacturer: METZGER

• Engine Code: K7M 800
• Manufacturer: EPS

• Fitting Position: Front
• Exhaust System: before catalytic converter
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Number of connectors: 4
• Length [mm]: 475
• Manufacturer: VERNET

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.052
• Manufacturer: ERA

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

Manufacturer: MAGNETI MARELLI

• Engine Code: K7M 800
• Name: EP 1.995.083
• Manufacturer: EPS

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Number to: 061205
• for OE number: 8200052063
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• Engine Code: K7M 800
• Connector Shape: rectangular
• Voltage [V]: 12
• Length [mm]: 450
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 3.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV729

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K7M 800
• Quantity: 2
• Cable Length [mm]: 450
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Lambda Sensor: Heated, Planar probe, Thread pre-greased
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

• Required quantity: 1
• Number of pins: 2
• Tightening Torque [Nm]: 22
• Spanner Size: 24
• Thread Size: M12 x 1,25
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108881
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 365
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with manual transmission
• Number of pins: 6
• Manufacturer: ERA

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.