Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Weight [kg]: 0.002
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 11
- Quantity: 10
- Packaging length [cm]: 10
- Packaging width [cm]: 10
- Packaging height [cm]: 2
- Manufacturer: FEBEST
- Vehicle Equipment: for vehicles with power steering
-
Filter type: In-
Line Filter - Specification: Magnetfilter
- Diameter [mm]: 10
- Fitting Position: from steering gear to fluid reservoir
- Manufacturer: AIC
- Lisainfo: 55266 AIC
- Additional information: 55266 AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Operating Mode: Hydraulic
- Pulleys: with belt pulley
- Supplementary Article/Supplementary Info: without reservoir
-
Fabrication Number: SPW-
RE- 013 - Manufacturer: NTY
-
Name: NTY SPW-
RE- 013
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 49 11 012 06R
- Manufacturer Restriction: SAGINAW
- Pressure [bar]: 90
- Number of inlets/outlets: 2
- Manufacturer: KAMOKA
- Operating Mode: Mechanical
-
Fabrication Number: SPK-
RE- 002 - Manufacturer: NTY
-
Name: NTY SPK-
RE- 002 -
Lisainfo: UUS TOODE,
vana korpust pole vaja tagastada -
Additional information: UUS TOODE,
vana korpust pole vaja tagastada
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Hydraulic
-
Name: Hdraulikapump,
roolimine - Manufacturer: MAX
- Pulleys: with belt pulley
- Number of grooves: 6
- Supplementary Article/Supplementary Info: without reservoir
- for steering manufacturer: SAGINAW
- Pressure [bar]: 80
- Rotation Direction: Clockwise rotation
- New part without deposit:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Vehicle Equipment: for vehicles without air conditioning
- Pump Type: Vane Pump
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles without air conditioning
-
Left-/right-hand drive vehicles: for left-
hand/ right- hand drive vehicles - Pressure [bar]: 90
- Number of inlets/outlets: 2
-
Backflow Connector Thread Size: M16x1,
5 - Manufacturer: JPN
- Pressure [bar]: 110
- Operating Mode: Hydraulic
- Material: Aluminium
- Valve type: Pressure Limiting Valve
- Belt Pulley Ø [mm]: 125
- Pulleys: with belt pulley
- Rotation Direction: Clockwise rotation
- Number of inlets/outlets: 1
- Pump Type: Vane Pump
- Guarantee: 3 years guarantee
- New Part:
- Number of grooves: 6
- Always compare old and new part (in particular OE No.):
- Mounting Points Distance [mm]: 41
- Weight [kg]: 2.32
- Operating Pressure [bar]: 80
- Flow rate [l/h]: 50
- Name: CE 10SKV207
- Manufacturer: ESEN SKV
- Operating Mode: Manual
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Steering Gear Type: Rack and Pinion Steering Gear
- Quality class: PJ
- Name: Steering rack
- Construction Year to: 06.2013
- Operating Mode: Mechanical
- Axle Joint Thread Size: M14x1
- Manufacturer: KAMOKA
- Vehicle Equipment: for vehicles without air conditioning
- Operating Mode: Hydraulic
- Operating Pressure [bar]: 100
- Number of ribs: 6
- New part without deposit:
- Required quantity: 1
-
Name: Hdraulikapump,
roolimine - Manufacturer: MEY
- Operating Mode: Hydraulic
- Net weight [kg]: 2.92
-
Name: Pump -
Roolimine RENAULT CLIO II/ KANGOO 1, 5DCI - Manufacturer: ELS
Price of the deposit will be added in the sum of 32.49€
- Vehicle Equipment: for vehicles without air conditioning
- Manufacturer Restriction: SAGINAW
-
Left-/right-hand drive vehicles: for left-
hand/ right- hand drive vehicles - Number of inlets/outlets: 2
- Suction pipe connector diameter [mm]: 16
-
Backflow Connector Thread Size: M16x1,
5 - Distance of mounting bores [mm]: 80
- Mounting points diameter [mm]: 8
- Exchange Part:
- Pressure [bar]: 90
- Observe technical data:
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
Price of the deposit will be added in the sum of 98.01€
- Operating Mode: Hydraulic
- Manufacturer Restriction: SAGINAW
- Height [mm]: 106
- Guarantee: 2 years guarantee
- Number of ribs: 6
- Belt Pulley Ø [mm]: 130
- Technical Information: Pulley pressed on shaft
- Manufacturer: LIZARTE
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Net weight [kg]: 5.23
- Name: ROOLIAJAM
- Manufacturer: ELS
-
Lisainfo: ELS14-
0849 -
Additional information: ELS14-
0849
Price of the deposit will be added in the sum of 32.49€
- Vehicle Equipment: for vehicles with power steering
- Operating Mode: Hydraulic
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Supplementary Article/Info 2: with ball joints
-
Fabrication Number: SPK-
RE- 000 - Manufacturer: NTY
-
Name: NTY SPK-
RE- 000 -
Lisainfo: UUS TOODE,
vana korpust pole vaja tagastada -
Additional information: UUS TOODE,
vana korpust pole vaja tagastada
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Vehicle Equipment: for vehicles with power steering
- Operating Mode: Hydraulic
- Manufacturer: JPN
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Net weight [kg]: 6.26
- Name: ROOLIAJAM
- Manufacturer: ELS
Price of the deposit will be added in the sum of 97.46€
- Vehicle Equipment: for vehicles with power steering
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Manufacturer Restriction: JTEKT
- Distance of mounting bores [mm]: 310
- External Thread [mm]: M14x1
- Stroke [mm]: 135
- Manufacturer: KAMOKA
- Operating Mode: Hydraulic
- Manufacturer: METALCAUCHO
-
Operating Mode: Electric-
hydraulic - Manufacturer Restriction: KOYO
- for OE number: 491101295R
- Name:
- Manufacturer: SAS
- Vehicle Equipment: for vehicles with power steering
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: JTEKT
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Overall Length [mm]: 1,
020 - Distance of mounting bores [mm]: 310
- Stroke [mm]: 135
- Input shaft height [mm]: 84
- Input Shaft Diameter [mm]: 18
-
Axle Joint Thread Size: M14x1,
5 - Exchange Part:
- Observe service information:
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks