• Engine Code: N12 B16 A
• Required quantity: 8
• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Manufacturer: AE

• Engine Code: N12 B16 A, N16 B16 A
• Block Separation:
• Diameter [mm]: 12
• Height [mm]: 29.9
• Operating Mode: Hydraulic
• Fitting Position: Exhaust Side, Intake Side
• General Information: vehicle-dependent installation sides
• Name: KLAPITAPP
• Manufacturer: FRE

• Engine Code: N16 B16 A
• Fitting Position: Inlet
• Required quantity: 8
• for OE number: 0903.H3
• Name: Nookur, mootorijuhtimine
• Manufacturer: MVE

• Required quantity: 8
• Operating Mode: Hydraulic
• Diameter [mm]: 12
• Valve type: for exhaust valves
• Fitting Position: Intake Side, Exhaust Side
• Manufacturer: BGA

• Engine Code: N16 B16 A
• Fitting Position: Exhaust Side
• Required quantity: 8
• for OE number: 0903.J6
• Name: Nookur, mootorijuhtimine
• Manufacturer: MVE

• Engine Code: N12 B16 A
• Required quantity: 8
• Fitting Position: Exhaust Side
• Operating Mode: Hydraulic
• Manufacturer: AE

• Engine Code: N12 B16 A
• Manufacturer: AE

• Engine Code: N12 B16 A
• Operating Mode: Hydraulic
• Outer Diameter [mm]: 12
• Length [mm]: 30
• Fitting Position: both sides
• Manufacturer: KOLBENSCHMIDT

• Fitting Position: Exhaust Side
• Required quantity: 8
• Operating Mode: Hydraulic
• Height [mm]: 29.9
• Diameter [mm]: 12
• SVHC: No SVHC present!
• Name: KLAPITAPP
• Manufacturer: INA
• Lisainfo: 420022610
• Additional information: 420022610

• Engine Code: N12 B16 A, N16 B16 A
• Block Separation:
• Operating Mode: Hydraulic
• Outer Diameter [mm]: 12
• Length [mm]: 40
• Fitting Position: both sides
• Manufacturer: KOLBENSCHMIDT

• Engine Code: N16 B16 A
• Thickness [mm]: 39.5
• Outer Diameter [mm]: 12
• Operating Mode: Hydraulic
• Fitting Position: Intake Side
• Weight [kg]: 0.018
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N16 B16 A
• Fitting Position: Exhaust Side
• Thickness [mm]: 29.5
• Outer Diameter [mm]: 12
• Operating Mode: Hydraulic
• Weight [kg]: 0.014
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Valve type: for inlet valves
• Parameter: 2
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 3
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 4
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Required quantity: 8
• Valve type: for exhaust valves
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Fitting Position: Intake Side
• Required quantity: 8
• Operating Mode: Hydraulic
• Height [mm]: 39.3
• Diameter [mm]: 12
• SVHC: No SVHC present!
• Name: KLAPITAPP
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 1
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 5
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Engine Code: N12 B16 A
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: KS

• Engine Code: N16 B16 A
• Fitting Position: Exhaust Side
• Weight [kg]: 0.037
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N12 B16 A, N16 B16 A
• Valve type: for exhaust valves
• Required quantity: 8
• Operating Mode: Hydraulic
• Fitting Position: Intake Side, Exhaust Side
• Name: KLAPITAPP
• Manufacturer: AJU

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: both sides
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: MAX
• Lisainfo: 27-0551
• Additional information: 27-0551

• Fitting Position: Intake Side, Exhaust Side
• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Fabrication Number: EFR-BM-002
• Manufacturer: NTY
• Name: NTY EFR-BM-002

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: EFR-BM-010
• Manufacturer: NTY
• Name: NTY EFR-BM-010

• Construction Year from: 09.2009
• Construction Year to: 12.2014
• Required quantity: 2
• Number of pins: 2
• Pin Shape: Flat
• Plug Type: Male
• Material: Metal
• Length [mm]: 118
• Width [mm]: 30
• Height [mm]: 30
• Manufacturer: GATES

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Warranty: 3 years warranty
• Weight [kg]: 0.22
• Name: CE 39SKV015
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Number of connectors: 2
• Valve type: Control Valve

• Length [mm]: 118
• Number of connectors: 2
• Fitting Position: both sides
• Weight [kg]: 0.18
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: both sides
• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Number of Teeth: 40
• Fitting Position: Intake Side
• Required quantity: 1
• Warranty: 3 years warranty
• paired article number: 39SKV507
• Engine Timing: Timing Chain
• Manufacturer: SKV GERMANY

• Number of Teeth: 40
• Fitting Position: Exhaust Side
• Required quantity: 1
• Warranty: 3 years warranty
• paired article number: 39SKV506
• Engine Timing: Timing Chain
• Name: CE 39SKV507
• Manufacturer: ESEN SKV

• Fabrication Number: RKZ-BM-004
• Manufacturer: NTY

• Fabrication Number: RKZ-BM-005
• Manufacturer: NTY

• Fitting Position: Exhaust Side
• Supplementary Article/Info 2: with screw
• Number of Teeth: 40
• Height [mm]: 36
• Manufacturer: KAMOKA

• Fitting Position: Intake Side
• Supplementary Article/Info 2: with screw
• Number of Teeth: 40
• Height [mm]: 36
• Manufacturer: KAMOKA

• Number of Teeth: 40
• Fitting Position: Intake Side
• Engine Timing: Timing Chain
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• Warranty: 3 years warranty
• Weight [kg]: 1.04
• Name: CE 39SKV500
• Manufacturer: ESEN SKV

• Number of Teeth: 40
• Fitting Position: Exhaust Side
• Engine Timing: Timing Chain
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• Supplementary Article/Supplementary Info: without gasket/seal
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Fabrication Number: ERZ-CT-000
• Manufacturer: NTY
• Name: NTY ERZ-CT-000

• Valve type: Solenoid Valve
• Operating Mode: electromagnetic
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: ZAWàR ZMIENNYCH FAZ ROZRZ¤DU BMW 1 F20 10-
• Manufacturer: VDO

• Operating Mode: Electric-hydraulic
• Voltage [V]: 12
• Number of pins: 2
• Valve type: Solenoid Valve
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Electric
• Number of pins: 2
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 1.13
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 96SKV087

• Engine Code: N12 B16 A, N16 B16 A
• Block Separation:
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: PIE

• Engine Code: N16 B16 A, N12 B16 A
• Block Separation:
• Fitting Position: Intake Side, Exhaust Side
• Number of pins: 2
• Operating Mode: Electric-hydraulic
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Weight [kg]: 0.161
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Exhaust Side
• Required quantity: 1
• Drive Type: Chain
• Operating Mode: Hydraulic
• Number of Teeth: 40
• SVHC: No SVHC present!
• Manufacturer: INA

• Fitting Position: Intake Side
• Required quantity: 1
• Drive Type: Chain
• Operating Mode: Hydraulic
• Number of Teeth: 40
• SVHC: No SVHC present!
• Manufacturer: INA

• Engine Code: N16 B16 A
• Supplementary Article/Supplementary Info: without gasket/seal
• Article number of recommended accessories: VDO A2C59516961, BMW 11 12 7 560 273
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Manufacturer: VDO

Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• Seal Material: Metal
• Number of connectors: 2
• Weight [kg]: 0.962
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Supplementary Article/Supplementary Info: with seal
• Name: SW 11 10 5916
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 36.8
• Number of Teeth: 40
• Fitting Position: Exhaust Side
• Weight [kg]: 0.94
• Supplementary Article/Info 2: with screw
• Name: Nukkvolliseadistaja
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Supplementary Article/Info 2: with screw
• Number of Teeth: 40
• Required quantity: 1
• Manufacturer: METZGER

• Height [mm]: 36.5
• Number of Teeth: 40
• Fitting Position: Intake Side
• Weight [kg]: 0.92
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.