• Number of pins: 4
• Colour: black
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

Fabrication Number: ECT-BM-010

• Length [mm]: 68
• Housing Colour: black
• Spanner Size: 22
• Manufacturer: KAMOKA

• Length [mm]: 68
• Spanner Size: 22
• Colour: black
• Number of pins: 4
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Connector Shape: round
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 4
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621703993
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Fabrication Number: ECT-BM-013
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Length 1 [mm]: 118
• Length 2 [mm]: 95
• Manufacturer: KAMOKA

• Construction Year to: 09.1995
• Number of pins: 2
• Length [mm]: 95
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Construction Year from: 09.1995
• Number of pins: 2
• Length [mm]: 109
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Socket colour: black
• Manufacturer: ERA

• Length 1 [mm]: 118
• Length 2 [mm]: 95
• Fabrication Number: CZW-BM-018A
• Manufacturer: NTY
• Name: NTY CZW-BM-018A

• Construction Year from: 09.1995
• Number of pins: 2
• Length 1 [mm]: 118
• Length 2 [mm]: 95
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Name: CE 17SKV638
• Manufacturer: ESEN SKV

• Engine Code: M52 B(20 6 S3) Vanos
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.01
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV341
• Manufacturer: ESEN SKV

• Construction Year to: 09.1995
• Length [mm]: 95
• Sensor Type: Passive sensor
• Number of pins: 2
• Combi Switch Function: Reed Contact
• Weight [kg]: 0.03
• Operating voltage [V]: 12
• Warranty: 3 years warranty
• Name: CE 17SKV639
• Manufacturer: ESEN SKV

Vehicle Equipment: for vehicles with air conditioning, for vehicles with automatic climate control

• for OE number: 12 14 1 703 277
• Cable Length [mm]: 760
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Fabrication Number: ECP-BM-002
• Manufacturer: NTY

• Construction Year to: 09.1998
• Sensor Type: Hall Sensor
• Number of pins: 3
• Cable Length [mm]: 785
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 13621703993, MEK000020, MEK100160A

• Construction Year to: 03.1996
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 760
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Construction Year to: 09.1995
• Length [mm]: 95
• Voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Number of pins: 2
• Name: Andur,Jahutusvedelikutase
• Manufacturer: MAX

Number of pins: 2

• Construction Year to: 09.1995
• Length [mm]: 95
• Outer Diameter [mm]: 30
• Number of connectors: 2
• Colour: black
• Material: Plastic
• Weight [kg]: 0.02
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.1995
• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Length [mm]: 95
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: MEY

Vehicle Equipment: for vehicles with air conditioning, for vehicles with automatic climate control

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 09.1995
• Length [mm]: 95
• Outer Diameter [mm]: 30
• Number of connectors: 2
• Colour: black
• Material: Plastic
• Weight [kg]: 0.02
• Manufacturer: SWAG
• Name: SW 20 90 1789

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.1995
• Length [mm]: 118, 95
• Number of connectors: 2
• Weight [kg]: 0.03
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECP-BM-008
• Manufacturer: NTY

• Construction Year to: 09.1998
• Sensor Type: Active sensor
• Cable Length [mm]: 710
• Number of pins: 3
• Name: Andur,p””rded
• Manufacturer: MAX

• Construction Year to: 03.1996
• Vehicle Equipment: for vehicles with headlamp cleaning system
• Number of connectors: 2
• Length [mm]: 97.5
• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Name: CE 17SKV647
• Manufacturer: ESEN SKV

• Construction Year to: 03.1996
• Vehicle Equipment: for vehicles with headlamp cleaning system
• Length [mm]: 97.5
• Number of connectors: 2
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Quality: IAM
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: M52 B20 (206S3)
• Cable Length [mm]: 725
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Height [mm]: 65.9
• Thread Size: M12x1,5
• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 03.1996
• Length [mm]: 80
• Number of connectors: 2
• Weight [kg]: 0.016
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 93 2915

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Construction Year from: 10.1998
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Engine Code: M52 B20 (206S3)
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Height [mm]: 33
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 09.1998
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Sensor Type: Hall Sensor
• Cable Length [mm]: 760
• for OE number: 12 14 1 703 277
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.1998
• Number of pins: 3
• Manufacturer: DELPHI

• Engine Code: M52 B20 (206S3)
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Production date to: 31.08.1998
• Sensor Type: Hall Sensor
• Cable Length [mm]: 726.9
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Construction Year to: 09.1998
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M52 B20 (206S3)
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Number of connectors: 3
• Weight [kg]: 0.03
• Name: SW 33 10 9727
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Cable Length [mm]: 760
• Number of pins: 3
• Weight [kg]: 0.07
• Fitting Depth [mm]: 24
• Resistor [kOhm]: 18
• Manufacturer: ERA

• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY

• Engine Code: M52 B20 (206S3)
• Cable Length [mm]: 710
• Number of pins: 3
• Resistor [Ohm]: 670
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: M52B20
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.09
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL
• Lisainfo: VAL254030
• Additional information: VAL254030

• Construction Year from: 12.1998
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 33
• for OE number: 12 14 1 709 616, NSC106100
• Manufacturer: MEAT&DORIA

• Colour: black
• Number of pins: 3
• Weight [kg]: 0.03
• Fitting Depth [mm]: 33
• Manufacturer: ERA

• Required quantity: 1
• Construction Year to: 09.1998
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. BMW 3 E36 2,0 97-
• Manufacturer: BRM

• Construction Year to: 09.1998
• Voltage [V]: 12
• Cable Length [mm]: 785
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.1998
• Number of pins: 3
• Cable Length [mm]: 755
• Fitting Depth [mm]: 24
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Construction Year from: 09.1998
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M52 B20 (206S3)
• Cable Length [mm]: 720
• Number of pins: 3
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Construction Year from: 10.1998
• Number of pins: 3
• Fitting Depth [mm]: 33.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Engine Code: M52B20
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Construction Year from: 10.1998
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012680011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: FAE

• Construction Year to: 09.1998
• Length [mm]: 785
• Sensor Type: Hall Sensor
• Quality: IAM
• Manufacturer: METZGER

• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with holder
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Cable Length [mm]: 780
• for OE number: 12 14 1 703 277
• Number of pins: 3
• Sensor Type: Hall Sensor, Active sensor
• Number of connectors: 3
• Supplementary Article/Info 2: for crankshaft, with cable
• Length [mm]: 815
• Colour: black
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: rectangular
• Resistor [kOhm]: 18
• Weight [kg]: 0.13
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 420
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, with cable
• Sensor Type: Hall Sensor, Active sensor
• Length [mm]: 420
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 27.5
• Connector Shape: rectangular
• Corresponds to the original part in colour: black
• Weight [kg]: 0.113
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M52B20
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.1
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Engine Code: M52 B20 (206S3)
• Construction Year to: 09.1998
• Cable Length [mm]: 780
• Tolerance [%]: +15, -5
• Number of pins: 3
• Colour: black
• Name: Andur, v„ntvoll
• Manufacturer: VDO

• Number of pins: 2
• Fitting Depth [mm]: 95
• for OE number: 61311384739

• Number of pins: 2
• Fitting Depth [mm]: 40
• for OE number: 61318360855

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 12621710535