• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B37 C15 A
• Required quantity: 1
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Quantity: 1
• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10501

• Engine Code: B37 C15 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 2
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Housing Colour: black
• Fitting Position: Cylinder Head
• Power [W]: 0.06
• Manufacturer: METZGER

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Engine Code: B37 C15 A
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: B37 C15 A
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Lower
• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fitting Position: Lower
• Manufacturer: VERNET

• Fabrication Number: ECS-BM-004
• Manufacturer: NTY

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 50
• Name: DE PS20078-12B1
• Manufacturer: DELPHI

• Fitting Position: EGR Valve
• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 800
• Thread Size: M10x1.25
• Manufacturer: METZGER

• Exhaust System: before exhaust gas recirculation
• Manufacturer: NRF

• Construction Year to: 02.2018
• Number of pins: 3
• Opening pressure [kPa]: 14
• Name: DE DPS00033-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Colour: black
• Connector Shape: oval
• Fabrication Number: ECS-BM-006
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of connectors: 3
• Fabrication Number: ECS-BM-009
• Manufacturer: NTY

• Construction Year from: 03.2018
• Number of pins: 3
• Opening pressure [kPa]: 5
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 116D,118D,120D, X5 XDRIVE 25D 13-

• Fitting Position: Intake Manifold
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Opening pressure [kPa]: 5
• Name: DE DPS00058-12B1
• Manufacturer: DELPHI

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Construction Year to: 02.2018
• Exhaust System: before soot particulate filter
• for OE number: 13628570686
• Manufacturer: NRF

• Construction Year from: 10.2015
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366149

• Engine Code: B37 C15 A
• Required quantity: 1
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of connectors: 3
• Fabrication Number: ECS-BM-008
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: B37 C15 A
• Construction Year to: 02.2018
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 13 62 8 570 233
• Overall Length [mm]: 1,050
• Number of pins: 2
• Fabrication Number: EGT-BM-012
• Cable Length [mm]: 910
• Manufacturer: NTY

• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Engine Code: B37 C15 A
• Construction Year from: 11.2015
• Construction Year to: 02.2018
• Fitting Position: Fuel Rail
• Thread Size: M 18
• Number of pins: 3
• Weight [kg]: 0.07
• Thread Pitch [mm]: 1.5
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV615

• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Manufacturer: SKV GERMANY

• Version: B37B
• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Version: B37B
• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• for OE number: 13 62 8 589 813
• Overall Length [mm]: 840
• Number of pins: 2
• Fabrication Number: EGT-BM-010
• Cable Length [mm]: 690
• Manufacturer: NTY

• Engine Code: B37 C15 A
• Construction Year from: 11.2015
• Construction Year to: 02.2018
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Exhaust System: after soot particulate filter
• for OE number: 13 62 8 589 813
• Overall Length [mm]: 840
• Cable Length [mm]: 690
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Shape: straight
• Manufacturer: SKV GERMANY
• Name: CE 30SKV381

• Fitting Position: Particulate Filter
• for OE number: 13628570233, 13628570121
• Required quantity: 1
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 1,000
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 53
• Gross Weight [g]: 81
• Manufacturer: DENSO
• Name: DN DET-0152

• Construction Year from: 01.2018
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 500
• Overall Length [mm]: 625
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Weight [kg]: 0.06
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Shape: straight
• Number of pins: 2
• Cable Length [mm]: 910
• Overall Length [mm]: 1,050
• for OE number: 13 62 8 570 233
• Manufacturer: MEAT&DORIA

• Engine Code: B37 C15 A
• Construction Year from: 03.2018
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Overall Length [mm]: 660
• Manufacturer: BOSCH

• Engine Code: B37 C15 A
• Construction Year from: 11.2015
• Construction Year to: 02.2018
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Overall Length [mm]: 430
• Manufacturer: BOSCH
• Name: BS 0281004744

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Construction Year from: 11.2015
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 930
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 9
• Weight [kg]: 0.1
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV423

• Engine Code: B37 C15 A
• Construction Year from: 03.2018
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH

• Transmission Type: Automatic Transmission
• Colour: black
• Operating Mode: Electric
• Number of pins: 6
• Material: Plastic
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Engine Code: B37 C15 A
• Construction Year from: 03.2018
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Length [mm]: 660
• not for OE number: 13627101680
• Manufacturer: METZGER

• Engine Code: B37 C15 A
• Construction Year from: 03.2018
• Name: NOx-sensor, karbamiidipritse
• Manufacturer: BOS

• Block Separation:
• Length [mm]: 600
• Number of connectors: 5
• Manufacturer: METZGER

Fitting Position: before SCR catalytic converter, after SCR catalytic converter

• Construction Year from: 03.2018
• Exhaust System: before soot particulate filter