• Supplementary Article/Info 2: without cable
• Fitting Position: Right, Exhaust Side, Intake Side
• Fabrication Number: ECP-BM-000
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 12 14 1 435 351
• Manufacturer: KAMOKA

• Fitting Position: Exhaust Side
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECP-BM-008
• Manufacturer: NTY

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring, without cable
• Number of pins: 3
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Engine Code: M54 B22 (226S1)
• Number of pins: 3
• Connector Shape: oval
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Fitting Position: Intake Side
• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Fitting Depth [mm]: 28
• Cable Length [mm]: 415
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Fitting Position: Intake Side
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Number of pins: 9
• Fabrication Number: ECP-BM-015
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 12 14 1 435 350
• Manufacturer: KAMOKA

• Length [mm]: 535
• Fitting Position: Intake Side
• Observe service information:
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Fitting Position: Exhaust Side
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• Manufacturer: MEAT&DORIA

• Sensor Type: Active sensor
• for OE number: 13 62 7 787 192
• Manufacturer: KAMOKA

• Number of pins: 3
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Fitting Position: Exhaust Side
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW X3 E83 XDRIVE 08-

• Length [mm]: 28.2
• Number of connectors: 3
• Fitting Position: Exhaust Side, Intake Side
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Length [mm]: 28.2
• Number of connectors: 3
• Fitting Position: Exhaust Side, Intake Side
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 3799

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Intake Side
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• Height [mm]: 28.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Height [mm]: 33
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fitting Position: Intake Side
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Number of pins: 3
• Fitting Position: Intake Side
• Manufacturer: MEAT&DORIA

• for model code: 3 Pin
• Number of pins: 3
• Manufacturer: DELPHI

• Engine Code: M54 B22 (226S1)
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Engine Code: M 54 B 22
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Length [mm]: 425
• Number of pins: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of connectors: 3
• Weight [kg]: 0.03
• Name: SW 33 10 9727
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2003
• Engine Code: M54B22,
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

Manufacturer: MAGNETI MARELLI

• Length [mm]: 490
• Number of pins: 3
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Length [mm]: 495
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10814

• Fitting Position: Exhaust Side, Intake Side
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Quality: IAM
• Manufacturer: METZGER

• Length [mm]: 41.15
• Fitting Position: Exhaust Side
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, with seal ring
• Colour: black
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 12 14 1 709 616, NSC106100
• Manufacturer: MEAT&DORIA

• Colour: black
• Number of pins: 3
• Weight [kg]: 0.03
• Fitting Depth [mm]: 33
• Manufacturer: ERA

• Construction Year to: 04.2003
• Engine Code: M54B22,
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Required quantity: 1
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121701
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 04.2003
• Engine Code: M54B22
• Number of pins: 3
• Number of connectors: 3
• Supplementary Article/Info 2: for crankshaft, without cable
• Colour: black
• Sensor Type: Hall Sensor, Active sensor
• Supplementary Article/Supplementary Info: with holder
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 33
• Connector Shape: D Shape
• Number of mounting bores: 1
• Mounting Angle [degrees]: 90
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. BMW M52/M54 98-
• Manufacturer: BRM

• Length [mm]: 210
• Number of pins: 3
• Fitting Depth [mm]: 14
• Resistor M[ohm]: 13.5
• Manufacturer: ERA

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Voltage [V]: 12
• Length [mm]: 405
• Fitting Position: Intake Side
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Number of mounting bores: 1
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121641

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 535
• Number of connectors: 3
• Fitting Position: Intake Side
• Cable Length [mm]: 475
• Weight [kg]: 0.057
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 4162

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 535
• Number of connectors: 3
• Fitting Position: Intake Side
• Cable Length [mm]: 475
• Weight [kg]: 0.057
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 33.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Construction Year to: 04.2003
• Engine Code: M54B22
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012680011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Cable Length [mm]: 500
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Fitting Position: Intake Side
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Number of pins: 3
• Fitting Position: Exhaust Side
• Connector Shape: D Shape
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Number of mounting bores: 1
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

Supplementary Article/Info 2: with screw, with seal ring, for camshaft, without cable General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with holder
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424