• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Thickness [mm]: 86
• Material: Plastic
• Inner Diameter 1 [mm]: 61
• Weight [kg]: 0.02
• Inner Diameter 2 [mm]: 68
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E36/38/39

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• for OE number: 31331091868
• Manufacturer: SASIC

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 109
• Inner Diameter [mm]: 60, 70
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.039
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E39 95-03

• Thickness [mm]: 109
• Inner Diameter [mm]: 60, 70
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.039
• Manufacturer: SWAG
• Name: SW 20 93 1538

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Thermoplast
• Lisainfo: Boot for shock absorber, front
• Additional information: Boot for shock absorber, front

• Fitting Position: Rear Axle
• Axle: Coil Spring Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Axle: Coil Spring Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Braking/Drive Dynamics: for vehicles without EDC
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Spring-bearing Damper
• Name: CFD 561510
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Block Separation:
• Vehicle Equipment: for vehicles without leveling control
• Braking/Drive Dynamics: for vehicles without EDC
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 5 (E39) 95-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 5 (E39) 95-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Axle: Coil Spring Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 5 (E39) 95-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 5 (E39) 95-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Yoke
• Manufacturer: DENCKERMANN AMORTYZATORY

• Braking/Drive Dynamics: for vehicles without EDC
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 451510R
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Braking/Drive Dynamics: for vehicles without EDC
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 451510L
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Fitting Position: Front Axle both sides
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0174
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA

• Fitting Position: Front Axle both sides
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMJ0174
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Suspension: for vehicles without electronic suspension control
• Quantity per axle: 1
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 51
• Thread Size: M14x1,5
• Length 1 [mm]: 493
• Length 2 [mm]: 314
• Piston Rod Diameter [mm]: 22
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Length [mm]: 598
• Length 2 [mm]: 394
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 50.8
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 303
• Suspension: for vehicles with standard suspension
• Piston Rod Diameter [mm]: 25
• paired article number: A-3402GR
• Suspension Strut Outer Diameter [mm]: 58
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 303
• Suspension: for vehicles with standard suspension
• Piston Rod Diameter [mm]: 25
• paired article number: A-3402GL
• Suspension Strut Outer Diameter [mm]: 58
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-361580, GH-691900
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Suspension: for vehicles without electronic suspension control
• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 49
• Thread Size: M10x1,0
• Length 1 [mm]: 590
• Length 2 [mm]: 389
• Piston Rod Diameter [mm]: 14
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 314 740 0003
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle Left
• Length [mm]: 587
• Length 2 [mm]: 409
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 58
• Diameter 2 [mm]: 36
• paired article number: 357214070100
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Right
• Length [mm]: 589
• Length 2 [mm]: 410
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 58
• Diameter 2 [mm]: 36
• paired article number: 357214070200
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle both sides
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SM0174
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 300 313 3601, 314 640 0000
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Braking/Drive Dynamics: for vehicles without EDC
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• paired article number: 335811
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Braking/Drive Dynamics: for vehicles without EDC
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• paired article number: 335812
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Front Axle, Left
• not for trim level: M-Sport
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.7
• Bore Ø [mm]: 35
• Piston Rod Diameter [mm]: 25
• Article number of recommended accessories: MK136, PK125
• paired article number: G8427
• Packaging length [cm]: 71.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 21.7
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles without "East European" suspension Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle, Right
• not for trim level: M-Sport
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.7
• Bore Ø [mm]: 35
• Piston Rod Diameter [mm]: 25
• Article number of recommended accessories: MK136, PK125
• paired article number: G8428
• Packaging length [cm]: 71.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 21.7
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles without "East European" suspension Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Spring Type: for vehicles with coil spring suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.5
• Bore Ø [mm]: 35
• Length 1 [mm]: 395
• Length 2 [mm]: 576
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK123
• Packaging length [cm]: 61.7
• Packaging width [cm]: 14
• Packaging height [cm]: 14
• Manufacturer: MONROE

Suspension: for vehicles with heavy duty suspension, for vehicles with M technology Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Suspension: for vehicles with M technology
• Axle: Coil Spring Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Parameter: SEXOV32X184A
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• reinforced version:
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Spring Type: for vehicles with coil spring suspension
• not for trim level: M-technology
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 3
• Bore Ø [mm]: 35
• Length 1 [mm]: 393
• Length 2 [mm]: 590
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK123, PK417
• Packaging length [cm]: 67.7
• Packaging width [cm]: 13
• Packaging height [cm]: 13
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles without "East European" suspension Warranty: 5 years warranty with accessories when replaced in pairs

• Braking/Drive Dynamics: for vehicles without EDC
• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Spring-bearing Damper
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with heavy duty suspension
• Parameter: SFE36/25X116A
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Housing Type: Aluminium Housing
• reinforced version:
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
BMW 5 (E39) 96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
BMW 5 (E39) 96-
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
BMW 5 E39, 95-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
BMW 5 E39, 95-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.7
• Bore Ø [mm]: 35
• Length 1 [mm]: 258
• Length 2 [mm]: 423
• Piston Rod Diameter [mm]: 25
• Article number of recommended accessories: MK136, PK125
• paired article number: 742028SP
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Packaging height [cm]: 17.2
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension Warranty: 5 years warranty with accessories when replaced in pairs