Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Filter type: In-
Line Filter - Height [mm]: 300
- Outer Diameter [mm]: 55
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Lisainfo: Fuel filter
- Additional information: Fuel filter
- Construction Year from: 12.1995
- Fitting Position: Rear Axle
- Brake System: ATE
- Height [mm]: 44.9
- Width [mm]: 123
- Thickness [mm]: 17.3
- Wear Warning Contact: excl. wear warning contact
- Manufacturer: JP GROUP
-
Lisainfo: Brake pad set,
rear, 17.3 mm -
Additional information: Brake pad set,
rear, 17.3 mm
-
Filter type: In-
Line Filter - Height [mm]: 300
- Outer Diameter [mm]: 55
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
-
Filter type: In-
Line Filter - Height [mm]: 300
- Housing Diameter [mm]: 55
- Manufacturer: DELLO AUTOMEGA
- Outer Diameter 1 [mm]: 55
- Outer Diameter 2 [mm]: 55
- Inner Diameter 1 [mm]: 8
- Inner Diameter 2 [mm]: 8
- Height [mm]: 300
-
Filter type: In-
Line Filter - Manufacturer: DENCKERMANN FILTRY
- Construction Year from: 12.1995
- Fitting Position: Rear Axle
- Diameter [mm]: 185
- Width [mm]: 20
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Filter type: In-
Line Filter - Length [mm]: 300
- Housing material: Metal
- Outer Diameter [mm]: 55
- Weight [kg]: 0.29
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 300
- Inlet Ø [mm]: 8
- Outer Diameter [mm]: 55.3
- Outlet Ø [mm]: 8
- Weight [kg]: 0.354
-
Filter type: In-
Line Filter - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Width [mm]: 123
- Height [mm]: 45
- Thickness [mm]: 17
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Lisainfo: JQ1011700 KAMOKA
- Additional information: JQ1011700 KAMOKA
-
Filter type: Spin-
on Filter - Height [mm]: 300
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 63
- Quality class: PJ
- Name: Fuel filter
-
Filter type: In-
Line Filter - Outer Diameter [mm]: 55
- Height [mm]: 300
- Housing Type: Aluminium Housing
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 12.1995
- Fitting Position: Rear Axle
- Width [mm]: 123
- Height [mm]: 44.9
- Thickness [mm]: 17.3
- Brake System: ATE
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Fitting Position: Rear Axle
- Width [mm]: 20
-
Brake System: Ate/
Teves - Inner brake drum diameter [mm]: 185
- Weight [kg]: 0.98
- Manufacturer: TOMEX BRAKES
-
Filter type: In-
Line Filter - Height [mm]: 299
- Outer Diameter [mm]: 55
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- SVHC: No SVHC present!
- Manufacturer: FILTRON
-
Filter type: In-
Line Filter - Outer Diameter [mm]: 55
- Overall Length [mm]: 302
- Manufacturer: HENGST FILTER
- Construction Year from: 12.1995
- Fitting Position: Front Axle
- Width 1 [mm]: 155.1
- Height 1 [mm]: 63.5
- Width 2 [mm]: 154.6
- Height 2 [mm]: 63.5
- Thickness [mm]: 20.3
- Brake System: ATE
- Test Mark: ECE R90
-
Manufacturer: ABAKUS DEPO/
LORO
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Height [mm]: 300
- Outer Diameter [mm]: 55
- Outer Diameter 1 [mm]: 56
- Outlet Ø [mm]: 8
- Inlet Ø [mm]: 8
- Filter type: Filter Insert
- Manufacturer: SOFIMA
-
Payload: for increased payload,
not for increased payload - Block Separation:
- Construction Year to: 09.1998
-
Length [mm]: 123.1,
121.9 - Width [mm]: 45
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 0.936
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Thickness [mm]: 17
- Height [mm]: 44.9
- Wear Warning Contact: prepared for wear indicator
- Brake System: ATE
- Width 1 [mm]: 122.1
- Width 2 [mm]: 123.1
- Weight [kg]: 0.85
- Manufacturer: TOMEX BRAKES
- Fitting Position: Rear Axle
-
FMSI Code: D1239-
7286 -
Test Mark: E1 90R-
01878/ 1087 - WVA Number: 21690 21691
- Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear indicator
- Width 1 [mm]: 123.3
- Width 2 [mm]: 123
- Height 1 [mm]: 44.9
- Height 2 [mm]: 44.9
- Thickness 1 [mm]: 16.8
- Thickness 2 [mm]: 16.8
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP1107
- Fitting Position: Rear Axle
- Brake System: TEVES
- Width [mm]: 123
- Height [mm]: 44.9
- Thickness [mm]: 16.3
- Width 2 [mm]: 123
- Height 2 [mm]: 44.7
- Thickness 2 [mm]: 16.3
- WVA Number: 21691
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 0.9
- Manufacturer: VALEO
- Name: VA 301311
- Construction Year to: 10.1996
- Thickness [mm]: 19.5
- Length [mm]: 157
- Height 1 [mm]: 64
-
WVA Number: 21676,
21677 - Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Diameter [mm]: 185
- Width [mm]: 20
- Brake Pad: with lining
- Fitting Position: Rear Axle
- Weight [kg]: 1.076
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fuel Mixture Formation: Petrol Injection
-
Filter type: In-
Line Filter - Diameter [mm]: 55
- Height [mm]: 300
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Manufacturer: BOSCH
- Name: BS 0450905905
- Construction Year from: 12.1995
- Fitting Position: Front Axle
- Braking System: not for vehicles with reinforced brakes
- Thickness [mm]: 20
- Height 1 [mm]: 63.5
- Height 2 [mm]: 64.1
- Brake System: ATE
- Width 1 [mm]: 154.4
- Width 2 [mm]: 155.1
- Article number of recommended accessories: KS0030
- Manufacturer: LPR
- Construction Year from: 12.1995
- Fitting Position: Front Axle
- Width 1 [mm]: 155.1
- Height 1 [mm]: 63.5
- Width 2 [mm]: 154.6
- Height 2 [mm]: 63.5
- Thickness [mm]: 20.3
- Brake System: ATE
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Width [mm]: 155
- Height [mm]: 64
- Thickness [mm]: 20
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
-
Filter type: Spin-
on Filter - Outer Diameter [mm]: 63
- Inner Diameter [mm]: 8
- Height [mm]: 300
- Name: Fuel filter
- Quality class: Q
Lisainfo: "Tootja: COOPERSFIAAM FILTERS
3 COMPACT (E46), 06.
(kvaliteediklass: PJ)"
Additional information: "Tootja: COOPERSFIAAM FILTERS
3 COMPACT (E46), 06.
(kvaliteediklass: PJ)"
- Engine Code: M52B25
-
Filter type: In-
Line Filter - Height [mm]: 299
- Outer Diameter [mm]: 55
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Weight [kg]: 0.333
- Manufacturer: VALEO
- Name: VA 587014
-
Filter type: In-
Line Filter - Diameter [mm]: 55
- Height [mm]: 300
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Net Weight [g]: 301
- Packaging height [cm]: 31
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Manufacturer: KNECHT
- Name: KN KL66
- Fitting Position: Rear Axle
-
Article number of recommended accessories: MWI0164,
MBA1241 - Width 1 [mm]: 123.2
- Width 2 [mm]: 122
- Height 1 [mm]: 45
- Height 2 [mm]: 45
- Thickness [mm]: 17.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21691
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 15.2
- Packaging width [cm]: 8.8
- Packaging height [cm]: 8.4
- Weight [kg]: 0.94
- Manufacturer: MINTEX
- Construction Year to: 11.1996
- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 155
- Height [mm]: 63.5
- Thickness [mm]: 19.3
- Width 2 [mm]: 157
- Height 2 [mm]: 63.5
- Thickness 2 [mm]: 19.3
- WVA Number: 21677
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: without anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.99
- Name: VA 301310
- Manufacturer: VALEO
- Fitting Position: Rear Axle
- Diameter [mm]: 185
- Width [mm]: 20
- Registration Type: ECE approved
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 156
- Height [mm]: 63.5
- Thickness [mm]: 19.6
- Width 2 [mm]: 155
- Height 2 [mm]: 63.5
- Thickness 2 [mm]: 19.6
- WVA Number: 21064
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.9
- Manufacturer: VALEO
- Name: VA 301409
- Construction Year from: 11.1996
-
Length [mm]: 154.8,
155.4 - Width [mm]: 63.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.85
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with mounting manual
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 21690
- Thickness [mm]: 17.3
- Width [mm]: 121.9
- Height [mm]: 45
- Manufacturer: BOSCH
-
Filter type: In-
Line Filter - Height [mm]: 300
- Outer Diameter [mm]: 55
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- SVHC: No SVHC present!
-
Manufacturer: MANN-
FILTER
- Fitting Position: Front Axle
- Construction Year to: 10.1996
- Width 1 [mm]: 155.2
- Height 1 [mm]: 64.2
- Thickness 1 [mm]: 20.3
- Width 2 [mm]: 156.4
- Height 2 [mm]: 64.2
- Thickness 2 [mm]: 20.3
- Brake System: ATE
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.97
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Block Separation:
- Construction Year to: 10.1996
- Trim Level: VALUE LINE
-
FMSI Code: D725-
7592 D947- 7592 -
Test Mark: E1 90R-
01881/ 749 - WVA Number: 21677 21676
- Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear indicator
- Width 1 [mm]: 155.5
- Width 2 [mm]: 156.4
- Height 1 [mm]: 63.9
- Height 2 [mm]: 63.9
- Thickness 1 [mm]: 19.8
- Thickness 2 [mm]: 19.8
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP1608
- Fitting Position: Front Axle
- Brake System: ATE
- Length 1 [mm]: 154.8
- Length 2 [mm]: 155.4
- Thickness [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Height [mm]: 63.6
-
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Construction Year from: 11.1996
- Width 1 [mm]: 154.6
- Height 1 [mm]: 64.2
- Thickness 1 [mm]: 20.3
- Width 2 [mm]: 155.2
- Height 2 [mm]: 64.2
- Thickness 2 [mm]: 20.3
- Brake System: ATE
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.87
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Construction Year from: 11.1996
-
Length [mm]: 154.8,
155.4 - Width [mm]: 63.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.85
- Name: SW 20 91 6349
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 10.1996
- Fitting Position: Front Axle
- Thickness [mm]: 20
- Height [mm]: 63.6
- Wear Warning Contact: prepared for wear indicator
- Brake System: ATE
- Width 1 [mm]: 154.8
- Width 2 [mm]: 155.4
- Weight [kg]: 1.8
- Manufacturer: TOMEX BRAKES
- Fitting Position: Rear Axle
- Number of pads: 4
- Thickness [mm]: 16.5
- Length [mm]: 123
- Height [mm]: 44.6
- Wear Warning Contact: prepared for wear indicator
- Brake Pad: With bevelled edges
- Brake System: ATE
-
WVA Number: 21691,
21891 - Name: SK VKBP90561
- Manufacturer: SKF
- Fitting Position: Front Axle
- Construction Year from: 10.1996
-
Article number of recommended accessories: MWI0163,
MBA1702 - Width 1 [mm]: 155.1
- Width 2 [mm]: 154.6
- Height 1 [mm]: 63.9
- Height 2 [mm]: 63.9
- Thickness [mm]: 20.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21990
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 1.95
- Manufacturer: MINTEX
- Construction Year to: 11.1996
-
Length [mm]: 156.4,
155.4 - Width [mm]: 63.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.845
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 11.1996
-
Length [mm]: 156.4,
155.4 - Width [mm]: 63.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.845
- Name: SW 20 91 6217
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Article number of recommended accessories: 8DK 355 250-
281, 8DZ 355 201- 311 - Width 1 [mm]: 123.2
- Width 2 [mm]: 122
- Height 1 [mm]: 45
- Height 2 [mm]: 45
- Thickness [mm]: 17.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21691
- Brake System: Teves
- Weight [kg]: 0.94
- Name: HE 8DB355007981
- Manufacturer: HELLA PAGID
- Construction Year from: 11.1996
- Length [mm]: 155
- Width [mm]: 64
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Weight [kg]: 1.85
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Width [mm]: 122
- Thickness [mm]: 17
- Height [mm]: 45
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
- Supplementary Article/Info 2: with piston clip
-
WVA Number: 21891,
21691 - Manufacturer: BREMBO
- Name: BR P 06 023
- Fitting Position: Rear Axle
- Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear indicator
-
Test Mark: E1 90R 01025/
196 - Height [mm]: 44.9
- Width [mm]: 122.1
- Thickness [mm]: 17
- Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
Brake Disc Type: solid,
Vented - Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21691
-
Test Mark: E20 90R-
01133/ 008 - Length [mm]: 123
- Thickness [mm]: 17.3
- Height [mm]: 45
- Manufacturer: BRECK KLOCKI HAMULCOWE
- Fitting Position: Front Axle
- Construction Year to: 10.1996
-
Article number of recommended accessories: MWI0163,
MBA1223 - Width 1 [mm]: 155.3
- Width 2 [mm]: 156.5
- Height [mm]: 63.9
- Thickness [mm]: 20.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21677
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 2
- Manufacturer: MINTEX
- Fitting Position: Front Axle
- Construction Year from: 10.1996
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 64
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
- Supplementary Article/Info 2: with piston clip
-
WVA Number: 21677,
21990 - Manufacturer: BREMBO
- Name: BR P 06 065
- Fitting Position: Rear Axle
- Thickness [mm]: 16.4
- Test Mark: R90 Homologated
- Width [mm]: 122
- Height [mm]: 45
- Weight [kg]: 0.849
- Height 1 [mm]: 45
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: ATE
- Packing Type: Box
- Width 1 [mm]: 123
- WVA Number: 21691
- Packaging length [cm]: 16.8
- Packaging width [cm]: 9.7
- Packaging height [cm]: 6.2
- Manufacturer: JURID
- Fitting Position: Front Axle
- Construction Year from: 10.1996
- Brake System: ATE
- Width [mm]: 155
- Height [mm]: 64
- Thickness [mm]: 20
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Construction Year to: 10.1996
- Fitting Position: Front Axle
- Thickness [mm]: 19.5
- Test Mark: R90 Homologated
- Width [mm]: 157
- Height [mm]: 63.5
- Weight [kg]: 1.676
- Height 1 [mm]: 63.5
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: ATE
- Packing Type: Box
- WVA Number: 21677
- Packaging length [cm]: 20.6
- Packaging width [cm]: 12.2
- Packaging height [cm]: 7.8
- Manufacturer: JURID
- Construction Year from: 12.1995
- Fitting Position: Rear Axle
- Width [mm]: 123
- Height [mm]: 44.9
- Thickness [mm]: 17.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0498/ 0352 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0218.2, 24.8190- 0222.2 - Observe dimensions:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Construction Year from: 11.1996
- Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear indicator
-
Test Mark: E9 90R 01705/
005 - Length 1 [mm]: 154.8
- Length 2 [mm]: 155.4
- Height [mm]: 63.6
- Thickness [mm]: 20
- Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Construction Year to: 10.1996
- Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear indicator
-
Test Mark: E9 90R 01705/
005 - Height [mm]: 63.6
- Width [mm]: 155.4
- Thickness [mm]: 20
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 11.1996
- Fitting Position: Front Axle
- Thickness [mm]: 20.3
- Test Mark: R90 Homologated
- Width [mm]: 162
- Height [mm]: 63.9
- Weight [kg]: 1.794
- Height 1 [mm]: 63.9
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: ATE
- Packing Type: Box
- WVA Number: 21990
- Packaging length [cm]: 20.6
- Packaging width [cm]: 12.2
- Packaging height [cm]: 7.8
- Manufacturer: JURID
- Fitting Position: Front Axle
- Construction Year from: 11.1996
- Brake Disc Type: Vented
- Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear indicator
-
WVA Number: 21677,
21990 -
Test Mark: E20 90R-
01124/ 007 - Length [mm]: 156.3
- Thickness [mm]: 20.3
- Height [mm]: 63.9
- Manufacturer: BRECK KLOCKI HAMULCOWE
- Filter type: Activated Carbon Filter
- Weight [kg]: 1.17
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 96SKV033
- Manufacturer: ESEN SKV
- Fitting Position: Front Axle
- Construction Year to: 10.1996
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 64
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
- Supplementary Article/Info 2: with piston clip
-
WVA Number: 21677,
21676 - Manufacturer: BREMBO
- Name: BR P 06 022
- Fitting Position: Front Axle
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate - Article number of recommended accessories: 1 987 474 334
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 21676
- Thickness [mm]: 20.1
- Height [mm]: 63.7
- Width 1 [mm]: 154.8
- Width 2 [mm]: 155.3
- Brake System: ATE
- Manufacturer: BOSCH
- Fitting Position: Front Axle
- Construction Year from: 10.1996
-
Article number of recommended accessories: 8DK 355 250-
271, 8DZ 355 201- 551 - Width 1 [mm]: 155.1
- Width 2 [mm]: 154.6
- Height 1 [mm]: 63.9
- Height 2 [mm]: 63.9
- Thickness [mm]: 20.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21990
- Brake System: Teves
- Weight [kg]: 1.95
- Name: HE 8DB355010711
- Manufacturer: HELLA PAGID
- Fitting Position: Front Axle
- Construction Year to: 10.1996
-
Article number of recommended accessories: 8DK 355 250-
271, 8DZ 355 201- 301 - Width 1 [mm]: 155.3
- Width 2 [mm]: 156.5
- Height [mm]: 63.9
- Thickness [mm]: 20.3
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 21677
- Brake System: Teves
- Weight [kg]: 2
- Name: HE 8DB355007961
- Manufacturer: HELLA PAGID
- Construction Year from: 12.1995
- Fitting Position: Front Axle
- Width 1 [mm]: 155.1
- Height 1 [mm]: 63.5
- Width 2 [mm]: 154.6
- Height 2 [mm]: 63.5
- Thickness [mm]: 20.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0334/ 0293 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0219.2 - Observe dimensions:
- Manufacturer: ATE
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Construction Year from: 10.1996
- Fitting Position: Front Axle
- Brake System: ATE
- Width [mm]: 155
- Height [mm]: 64
- Thickness [mm]: 20
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Construction Year from: 12.1995
- Fitting Position: Front Axle
- Width 1 [mm]: 155.1
- Height 1 [mm]: 63.5
- Width 2 [mm]: 154.6
- Height 2 [mm]: 63.5
- Thickness [mm]: 20.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0294 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0219.2 - Observe dimensions:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Construction Year to: 10.1996
- Fitting Position: Front Axle
- Thickness [mm]: 20.3
- Test Mark: R90 Homologated
- Width [mm]: 155.1
- Height 1 [mm]: 64.2
- Material: Ceramic
- Wear Warning Contact: prepared for wear indicator
- Brake System: ATE
- Packing Type: Box
- WVA Number: 21677
- Packaging length [cm]: 20.5
- Packaging width [cm]: 12.5
- Packaging height [cm]: 9.5
- Manufacturer: JURID
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks