• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 295
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Regulating Probe
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year to: 09.1998
• Length [mm]: 990
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-BM-005
• Manufacturer: NTY
• Name: NTY ESL-BM-005

Fitting Position: Left Front, Right Front, before catalytic converter

• Fitting Position: after catalytic converter
• Number of circuits: 4
• Switch Point [°C]: 98
• Cable Length [mm]: 1,000
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Length [mm]: 320
• Fabrication Number: ESL-BM-008
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Length [mm]: 990
• Fabrication Number: ESL-BM-002
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: M52 B28 (286S2)
• Construction Year from: 09.1998
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 990
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 09.1998
• Block Separation:
• Lambda Sensor: Regulating Probe, Finger probe
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: after catalytic converter, before catalytic converter

• Construction Year from: 10.1998
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Thread Size: M18 x 1,5
• Cable Length [mm]: 905
• Conductor Number: 4
• Length [mm]: 1,020
• Number of circuits: 4
• Weight [kg]: 0.174
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M52 B28 (286S2)
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Construction Year from: 09.1998
• Lambda Sensor: Regulating Probe, Planar probe
• Length [mm]: 320
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 09.1998
• Engine Code: M52B28
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Engine Code: M52 B28 (286S1)
• Country Specific Design: Japan
• Fitting Position: after catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Transmission Type: for automatic transmission
• Quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Conductor Number: 4
• Connector Shape: round
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.142
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 300
• Cable Length [mm]: 300
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Construction Year from: 10.1998
• Voltage [V]: 12
• Length [mm]: 970
• Number of circuits: 4
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV077

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 990
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV665

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M52 B28 (286S1), M52 B28 (286S2)
• Cable Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Length [mm]: 990
• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 990
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 300
• Lambda Sensor: Finger probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 10.1998
• Engine Code: M52 B28
• Voltage [V]: 12
• Length [mm]: 430
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV080
• Manufacturer: ESEN SKV

• Construction Year from: 10.1998
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Construction Year from: 09.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Construction Year from: 10.1998
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 04.1996
• Quantity: 2
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Conductor Number: 4
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.123
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.1998
• Fitting Position: Left, Right, Front, before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 970
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year from: 08.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Construction Year from: 09.1998
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 350
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, before catalytic converter

• Construction Year from: 09.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 320
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,020
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, before catalytic converter

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1998
• Engine Code: M52B28
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,020
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.17
• Name: VA 368214
• Manufacturer: VALEO

• Lambda Sensor: Regulating Probe
• Length [mm]: 970
• Number of pins: 4
• Technical Information Number: Universal 77013
• Manufacturer: FAE

• Construction Year to: 09.1998
• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 1,000
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066101
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.1998
• Fitting Position: Rear, Front
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 980
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Construction Year from: 09.1998
• for OE number: 11781 433 940
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Manufacturer Restriction: 4-adrig
• Cable Length [mm]: 990
• Thread Size: M 18x1,5
• Manufacturer: METZGER