• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 250
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Brake System: Teves
• Height [mm]: 37.6
• Width [mm]: 125
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 261
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0104A

• Fitting Position: Front Axle
• Length [mm]: 240
• Weight [kg]: 0.014
• Brake Type: Disc Brake
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 245
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0103A

• Brake System: TRW
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 245
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Brake System: ATE
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 270
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX
• Lisainfo: 23-0056
• Additional information: 23-0056

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 260
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: both sides
• Brake Type: Disc Brake
• Length [mm]: 265
• Supplementary Article/Info 2: with protection hose
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 250
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Length [mm]: 270
• Number of connectors: 2
• Colour: black
• Brake Type: Disc Brake
• Weight [kg]: 0.015
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 250
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.022
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Length 1 [mm]: 265
• Brake Type: Disc Brake
• Name: DE LZ0108
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
BMW
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BMW
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Length [mm]: 250
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Construction Year from: 09.1987
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 265
• Weight [kg]: 0.015
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 275
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 09.1987
• Fitting Position: Front Axle
• Length [mm]: 250
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Construction Year from: 09.1987
• Fitting Position: Rear Axle
• Length [mm]: 265
• Brake Type: Disc Brake
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 265
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 235
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 250
• Number of wear indicators [per axle]: 1
• Name: BR A 00 216
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 265
• Packaging length [cm]: 20
• Packaging width [cm]: 12
• Packaging height [cm]: 1
• Weight [kg]: 0.009
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Braking/Drive Dynamics: for vehicles with ABS
• Special Purpose Vehicle: for government vehicles
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 262
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• for OE number: 34 21 2 226 010
• Fitting Position: Rear Axle
• Manufacturer: TRUCKTEC

• Braking/Drive Dynamics: for vehicles with ABS
• Article number of recommended accessories: 98008200
• Fitting Position: Rear Axle
• Height [mm]: 37.6
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Width [mm]: 125
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Width [mm]: 95
• Height [mm]: 52
• Thickness [mm]: 15
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Article number of recommended accessories: 98008300
• Fitting Position: Front Axle
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: Lucas
• Width [mm]: 95
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Construction Year from: 04.1989
• Construction Year to: 04.1991
• Braking/Drive Dynamics: for vehicles with ABS
• FMSI Code: D279-7182
• WVA Number: 20675 20756
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 125.4
• Width 2 [mm]: 125
• Height 1 [mm]: 37.6
• Height 2 [mm]: 37.6
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI
• Name: DE LP442

• Fitting Position: Front Axle
• Construction Year to: 04.1991
• FMSI Code: D278-7181 D493-7373
• Test Mark: E1 90R-02A0039/0572
• WVA Number: 21173
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Width 1 [mm]: 95
• Width 2 [mm]: 94.7
• Height 1 [mm]: 51
• Height 2 [mm]: 51
• Thickness 1 [mm]: 16.3
• Thickness 2 [mm]: 16.3
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP596

Wear Warning Contact: excl. wear warning contact, not prepared for wear indicator

• Fitting Position: Rear Axle
• Width [mm]: 125
• Height [mm]: 37.6
• Thickness [mm]: 16.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Length [mm]: 95
• Width [mm]: 52.1
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.102
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Width [mm]: 125.5
• Height [mm]: 38
• Brake System: ATE-TEVES
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year from: 09.1987
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 125
• Height [mm]: 37.6
• Thickness [mm]: 16
• WVA Number: 20675
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.85
• Manufacturer: VALEO

• Length [mm]: 95
• Width [mm]: 52.1
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.102
• Name: SW 20 91 6197
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width 1 [mm]: 94.8
• Height 1 [mm]: 52.1
• Thickness 1 [mm]: 17.5
• Brake System: LUCAS/TRW
• Warning Contact Length [mm]: 250
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.08
• Number of wear indicators [per axle]: 1
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Construction Year to: 08.1988
• FMSI Code: D403-7292 D439-7323
• WVA Number: 21068
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Width 1 [mm]: 95
• Width 2 [mm]: 94.9
• Height 1 [mm]: 51.6
• Height 2 [mm]: 51.6
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP731

Wear Warning Contact: excl. wear warning contact, not prepared for wear indicator

• Fitting Position: Front Axle
• Width [mm]: 94.6
• Height [mm]: 52
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Brake Disc Type: solid, Vented
• Manufacturer Restriction: TRW
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21173
• Test Mark: E1 90R-01811/036
• Length [mm]: 94.7
• Thickness [mm]: 17
• Height [mm]: 51.9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Construction Year from: 09.1987
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with piston clip
• Article number of recommended accessories: 1 987 474 032
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20675
• Thickness [mm]: 16
• Width [mm]: 125.2
• Height [mm]: 37.6
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Construction Year from: 09.1987
• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 95
• Height [mm]: 52
• Thickness [mm]: 17
• WVA Number: 21173
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.05
• Manufacturer: VALEO

• Construction Year from: 09.1987
• Fitting Position: Front Axle
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21173
• Thickness [mm]: 17
• Width [mm]: 95
• Height [mm]: 52
• Brake System: Lucas-Girling
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Height [mm]: 37.7
• Width [mm]: 125.2
• Thickness [mm]: 16.4
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Width [mm]: 125
• Thickness [mm]: 17
• Height [mm]: 38
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip
• WVA Number: 20675, 20756
• Name: BR P 06 009
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Width [mm]: 95
• Thickness [mm]: 17
• Height [mm]: 51
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21173
• Name: BR P 06 010
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Article number of recommended accessories: 98008300
• Width [mm]: 94.7
• Height [mm]: 51.9
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21173
• Brake System: Lucas
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 1.1
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Width [mm]: 94.8
• Height [mm]: 51.9
• Thickness [mm]: 17
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 2
• Brake System: Lucas / TRW
• MAPP code available:
• Article number of recommended accessories: 24.8190-0201.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Article number of recommended accessories: 98008200, 82028800
• Width [mm]: 125.4
• Height [mm]: 37.6
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 20675
• Brake System: Teves
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 0.69
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Braking/Drive Dynamics: for vehicles with ABS
• Special Purpose Vehicle: for government vehicles
• Fitting Position: Rear Axle
• Width [mm]: 125
• Height [mm]: 37.6
• Thickness [mm]: 16.5
• Brake System: ATE
• MAPP code available:
• Article number of recommended accessories: 24.8190-0213.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Brake System: ATE-TEVES
• Width [mm]: 125
• Height [mm]: 38
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Brake System: LUCAS
• Width [mm]: 95
• Height [mm]: 52
• Thickness [mm]: 17
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN