• Fitting Position: Front Axle
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-5
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M8x1.25 16,0mm Hex-5 2tk
• Additional information: M8x1.25 16,0mm Hex-5 2tk

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 85
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 261
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Brake System: TRW
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 245
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 245
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Front Axle
• Thread Size: M8 x 1,25 x 16 mm
• Required quantity: 2
• only available in set:
• Manufacturer: METZGER

• Brake System: ATE
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 270
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX
• Lisainfo: 23-0056
• Additional information: 23-0056

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 262
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Brake System: Ate
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: AUT

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 250
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Length [mm]: 250
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.022
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 15.6
• Thread Size: M8X1,25
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Hexagon Socket
• Available as universal article as well, see article no.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Brake System: ATE
• Length 1 [mm]: 265
• Brake Type: Disc Brake
• Name: DE LZ0108
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
BMW
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BMW
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Length [mm]: 265
• Brake Type: Disc Brake
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 235
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 260
• Number of wear indicators [per axle]: 1
• Name: BR A 00 215
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 265
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 250
• Number of wear indicators [per axle]: 1
• Name: BR A 00 216
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Name: FR 901098
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 265
• Packaging length [cm]: 20
• Packaging width [cm]: 12
• Packaging height [cm]: 1
• Weight [kg]: 0.009
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Braking/Drive Dynamics: for vehicles with ABS
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 262
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle Right
• for brake disc diameter [mm]: 272

• Fitting Position: Rear Axle Left
• for brake disc diameter [mm]: 272

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 85
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle Right
• Inner Diameter [mm]: 90
• Outer Diameter [mm]: 290
• paired article number: 131-07-673
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle Left
• Inner Diameter [mm]: 90
• Outer Diameter [mm]: 290
• paired article number: 131-07-674
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• paired article number: 19-4352
• Fitting Position: Rear Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paired article number: 19-4353
• Fitting Position: Rear Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paired article number: 174235
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.364
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 33 10 7289
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.364
• Name: SW 33 10 7290
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 33 10 7290
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.364
• Name: SW 33 10 7289
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 174233
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.364
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Weight [kg]: 0.42
• Warranty: 3 years warranty
• Name: CE 57SKV627
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Right
• Weight [kg]: 0.44
• Warranty: 3 years warranty
• Name: CE 57SKV628
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Right
• paired article number: 6115035
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Front Axle Left
• paired article number: 6115036
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Left
• paired article number: 8125 11212
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• paired article number: 8125 11211
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Painted, Cathodic Painting
• for brake disc diameter [mm]: 272
• paired article number: 56246
• Diameter 1/ Diameter 2 [mm]: 115 / 290
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Painted, Cathodic Painting
• for brake disc diameter [mm]: 272
• paired article number: 56247
• Diameter 1/ Diameter 2 [mm]: 115 / 290
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Braking System: for vehicles with disc brakes on the rear axle
• Fitting Position: Rear Axle Right
• paired article number: 6115061
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Braking System: for vehicles with disc brakes on the rear axle
• Fitting Position: Rear Axle Left
• paired article number: 6115062
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Front Axle Right
• Weight [kg]: 0.49
• Warranty: 3 years warranty
• Name: CE 57SKV124
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Left
• Weight [kg]: 0.49
• Warranty: 3 years warranty
• Name: CE 57SKV123
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 55736
• Diameter 1/ Diameter 2 [mm]: 85 / 300
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Cathodic Painting, Zinc-coated
• paired article number: 55737
• Diameter 1/ Diameter 2 [mm]: 85 / 300
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.