Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 790
- Number of wear indicators [per axle]: 1
- Net weight [kg]: 0.03
- Fitting Position: Front Axle
- Manufacturer Restriction: ATE
- Net weight [kg]: 0.07
- Fitting Position: Rear Axle
- Brake System: ATE
- Weight [kg]: 0.04
- Fitting Position: Front Axle
- Manufacturer Restriction: ATE
- Manufacturer: JP GROUP
-
Lisainfo: Accessory Kit,
disc brake pads -
Additional information: Accessory Kit,
disc brake pads
- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2387A - Additional information: D42387A AUT
- Lisainfo: D42387A AUT
Lisainfo: Sensor, brake lining wear, rear
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Sensor Type: Inductive Sensor
-
Manufacturer: JP-
GROUP -
Lisainfo: ABS sensor,
rear, left/ right -
Additional information: ABS sensor,
rear, left/ right
- Fitting Position: Front Axle Left
- Outer Diameter [mm]: 310
- Inner Diameter [mm]: 100
- Manufacturer: JP GROUP
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc
- Fitting Position: Front Axle Right
- Outer Diameter [mm]: 310
- Inner Diameter [mm]: 100
- Manufacturer: JP GROUP
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc
- Length [mm]: 15.5
-
External Thread Size: M8 x 1,
25 - Quality/ Grade: 10.9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- Surface: Phosphatized
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.01
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M8 x 1,
25 - Length [mm]: 15
- Bolt Head-/Nut Design: Hexagon Socket
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Quantity Unit: Set
- Quantity: 2
-
Quality/ Grade: 8,
8 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Length [mm]: 16
-
Thread Size: M8x1,
25 - Thread Type: with external thread
-
Spanner Size: Hex-
6 -
Name: Kruvi,
piduriketas - Manufacturer: QBK
-
Lisainfo: M8x1.25 16,
0mm Hex- 6 2tk -
Additional information: M8x1.25 16,
0mm Hex- 6 2tk
- Thread Size: M8 x 14
- Observe the vehicle manufacturer specifications:
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Brake System: ATE
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX
- Fitting Position: Rear Axle
- Brake System: ATE
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK
- Fitting Position: Front Axle
- Brake System: ATE
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK
- Brake System: ATE
- Fitting Position: Front Axle
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX
- Fitting Position: Front Axle
- Brake System: ATE
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2558A
- Fitting Position: Rear Axle
- Brake System: ATE
- Weight [kg]: 0.04
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Brake System: ATE
- Weight [kg]: 0.06
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Length [mm]: 16
-
Thread Size: M8x1,
25 - Thread Type: with external thread
-
Spanner Size: Hex-
6 -
Name: Kruvi,
piduriketas - Manufacturer: TRI
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer Restriction: ATE
- Net weight [kg]: 0.04
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: NK
- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: ERT
- Fitting Position: Rear Axle
- Brake System: Teves
- Weight [kg]: 0.043
- Manufacturer: TOMEX BRAKES
- Fitting Position: Rear Axle
- Brake System: ATE
- Quantity: 2
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0136
- Quality class: PJ
Additional information: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Length [mm]: 790
- Brake Type: Disc Brake
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX
- Fitting Position: Front Axle
- Length [mm]: 15.7
-
Thread Size: M8X1,
25 - Material: Steel
-
Surface: Chrome-
(VI)- free passivation - Bolt Head-/Nut Design: Hexagon Socket
- Available as universal article as well, see article no.: TPM1000
-
Name: Kruvi,
piduriketas - Manufacturer: TEX
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity: 2
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0135
- Quality class: PJ
Additional information: "Tootja: DELPHI
7 (E32), 09.86-09.94
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
7 (E32), 09.86-09.94
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
-
Brake System: ATE
(Teves) - Manufacturer: FRENKIT
- Name: FR 901096
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 790
- Supplementary Article/Supplementary Info: Axle Kit
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: QBK
-
Fitting Position: Front Axle Left,
Front Axle Right - Braking/Drive Dynamics: for vehicles with ABS
- Brake Type: Disc Brake
- Length [mm]: 810
- Weight [kg]: 0.03
- Number of wear indicators [per axle]: 1
- Manufacturer: A.B.S.
- Fitting Position: Rear Axle
- Brake System: ATE
- Quality class: PJ
- Name: Brake pads fitting kit
- Fitting Position: Front Axle
- Brake System: Teves
- Weight [kg]: 0.054
- Manufacturer: TOMEX BRAKES
- Fitting Position: Rear Axle
- Brake System: ATE
- Length 1 [mm]: 790
- Brake Type: Disc Brake
- Manufacturer: DELPHI LOCKHEED HAMULCE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Drive Dynamics: for vehicles with ABS
- Brake Type: Disc Brake
- Length [mm]: 790
- Weight [kg]: 0.02
- Number of wear indicators [per axle]: 1
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Brake System: ATE
- Length 1 [mm]: 800
- Brake Type: Disc Brake
- Name: DE LZ0134
- Manufacturer: DELPHI
- Quality class: PJ
Additional information: "Tootja: DELPHI
3 KABRIOLET (E36), 0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
3 KABRIOLET (E36), 0
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 790
- Weight [kg]: 0.019
- Warning Contact Length [mm]: 790
- Manufacturer: TOMEX BRAKES
- Length [mm]: 790
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.01
- Name: SW 99 90 6867
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 790
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 790
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Warning Contact Length [mm]: 790
- Required quantity: 1
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MEY
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 810
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Name: QB WS0152A
- Fitting Position: Front Axle
- Brake System: ATE
- Quality class: PJ
- Name: Brake pads fitting kit
- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: BOSCH
- Fitting Position: Rear Axle
- Length [mm]: 790
- Brake Type: Disc Brake
- Manufacturer: BOSCH
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Length [mm]: 790
- Supplementary Article/Info 2: with protection hose
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Brake System: ATE
- Manufacturer: BOSCH
- Fitting Position: Front Axle Right
- Brake Type: Disc Brake
- Length [mm]: 800
- Manufacturer Restriction: ATE
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
- Required quantity: 1
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 790
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Fitting Position: Rear Axle
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Cable Length [mm]: 810
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
BM- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
BM- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Overall Length [mm]: 715
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
-
Fitting Position: Front Axle Left,
Front Axle Right - Sensor Type: Inductive Sensor
- Length [mm]: 560
-
Manufacturer: JP-
GROUP -
Lisainfo: ABS sensor,
front, left/ right -
Additional information: ABS sensor,
front, left/ right
- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 560
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Cable Length [mm]: 720
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Rear Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 700
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Quality class: PJ
- Sensor Type: Passive sensor
- Required quantity: 2
- Cable Length [mm]: 810
- Braking/Drive Dynamics: for vehicles with ABS
- Number of pins: 2
- Fitting Position: Rear Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: with cable
- Overall Length [mm]: 750
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: with cable
- Length [mm]: 830
- Braking/Drive Dynamics: for vehicles with ABS
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Fitting Position: Front Axle Left
Fitting Position: Front Axle Right
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
- Supplementary Article/Info 2: with cable
- Length [mm]: 810
- Required quantity: 2
-
Resistor [Ohm]: 1,
100 - Colour: grey
- Cable Length [mm]: 780
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Weight [kg]: 0.061
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left
- Inner Diameter [mm]: 100
- Outer Diameter [mm]: 310
-
paired article number: 131-
07- 108 - Colour: black
-
Article number of recommended accessories: 231-
03- 211 -
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Rear
- Length [mm]: 655
- Number of pins: 2
- Connector Shape: round
- Voltage [V]: 12
- Weight [kg]: 0.09
- Colour: grey
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV032
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 575
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Quality class: PJ
- Fitting Position: Front Axle
- Cable Length [mm]: 565
- Sensor Type: Passive sensor
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle Left
-
Fabrication Number: HTO-
BM- 018 -
paired article number: HTO-
BM- 019 - Manufacturer: NTY
-
Name: NTY HTO-
BM- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Right
-
Fabrication Number: HTO-
BM- 019 -
paired article number: HTO-
BM- 018 - Manufacturer: NTY
-
Name: NTY HTO-
BM- 019
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Connector Shape: round
- Cable Length [mm]: 590
- Overall Length [mm]: 660
- Sensor Type: Inductive Sensor
- Fitting Depth [mm]: 49
- for OE number: 34 52 1 163 027
-
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: MEAT&DORIA
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- paired article number: 503 002
-
Surface: Black-
painted, Cathodic Painting - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 750
- Number of connectors: 3
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.081
- Name: SW 20 92 3399
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 34 52 1 163 027
- Fitting Position: Front Axle both sides
- Manufacturer: TRUCKTEC
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
- paired article number: 171542
- Fitting Position: Front Axle Left
- Weight [kg]: 0.474
-
Name: Plekk,
piduriketas - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 171543
- Fitting Position: Front Axle Right
- Weight [kg]: 0.471
-
Name: Plekk,
piduriketas - Manufacturer: FEB
- Additional information: FE171542
- Lisainfo: FE171542
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
- Supplementary Article/Info 2: with cable
- Length [mm]: 750
- Required quantity: 2
-
Resistor [Ohm]: 1,
120 - Colour: grey
- Cable Length [mm]: 660
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Weight [kg]: 0.081
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Right
- Colour: black
- Material: Sheet Steel
- Surface: Cathodic Painting
-
paired article number: BSP-
5005L - Manufacturer: OPTIMAL ZAWIESZENIE
- Required quantity: 2
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Additional information: 50212 NRF
- Lisainfo: 50212 NRF
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 715
- Sensor Type: Passive sensor
- Weight [kg]: 0.086
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle Left
- Colour: black
- Material: Sheet Steel
- Surface: Cathodic Painting
-
paired article number: BSP-
5005R - Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle Right
- paired article number: 8125 11113
-
Name: Plekk,
piduriketas - Manufacturer: TRI
- Fitting Position: Front Axle Left
- paired article number: 8125 11114
-
Name: Plekk,
piduriketas - Manufacturer: TRI
- for OE number: 34 52 1 182 067
- Fitting Position: Rear Axle both sides
- Manufacturer: TRUCKTEC
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- paired article number: 11278
- Weight [kg]: 0.47
- Manufacturer: A.B.S.
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- paired article number: 11277
- Weight [kg]: 0.47
- Manufacturer: A.B.S.
- Fitting Position: Front Axle Right
- Weight [kg]: 0.53
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 57SKV126
- Fitting Position: Front Axle Left
- Weight [kg]: 0.53
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 57SKV125
- Number of pins: 2
- Cable Length [mm]: 790
- Fitting Position: Rear Axle
- Corresponds to the original part in colour: grey
- Sensor Type: Inductive Sensor
- Manufacturer: FAE
- Fitting Position: Front Axle Right
- Material: Sheet Steel
-
paired article number: V20-
3440 -
Surface: Stoved Enamel,
Zinc- coated - Weight [kg]: 0.472
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left
- Material: Sheet Steel
-
paired article number: V20-
3441 -
Surface: Stoved Enamel,
Zinc- coated - Weight [kg]: 0.473
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Overall Length [mm]: 832
- Length [mm]: 22
- Sensor Type: Passive sensor
- Socket colour: grey
- Cable Length [mm]: 720
- paired article number: 30041
- Weight [kg]: 0.07
- Manufacturer: A.B.S.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Cable Length [mm]: 687
- Number of pins: 2
- Sensor Type: Passive sensor
- Manufacturer: AUTOFREN SEINSA
- Length [mm]: 810
- Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.068
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 810
- Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.068
- Name: SW 20 92 4125
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: with cable
- Overall Length [mm]: 805
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: with cable
- Overall Length [mm]: 715
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
- Manufacturer: BOSCH
- Number of pins: 3
- Cable Length [mm]: 660
- Fitting Position: Front Axle
- Corresponds to the original part in colour: grey
- Sensor Type: Inductive Sensor
- Manufacturer: FAE
- Sensor Type: Passive sensor
- Cable Length [mm]: 780
- Braking/Drive Dynamics: for vehicles with ABS
- Number of pins: 2
- Fitting Position: Rear Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Fitting Position: Front Axle
- Cable Length [mm]: 634
- Fitting Depth [mm]: 49
- Number of pins: 3
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
-
Fitting Position: Right,
Front Axle - Cable Length [mm]: 660
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN ASB150.07
- Voltage [V]: 12
-
Resistor [Ohm]: 1,
120 - Cable Length [mm]: 555
- Sensor Type: Inductive Sensor
- Fitting Position: Front Axle
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU010039361
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Required quantity: 2
- Engine Code: S 50306S1
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Required quantity: 2
- Voltage [V]: 12
- Cable Length [mm]: 805
- Sensor Type: Passive sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU012039681
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Rear Axle
- Required quantity: 2
- Length [mm]: 780
- MAPP code available:
- Manufacturer: ATE
- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 560
- MAPP code available:
- Manufacturer: ATE