• Construction Year to: 06.1992
• Engine Code: M50 B20 (206S1), M50 B20 (206S2), M52 B20 (206S3)
• Block Separation:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 15
• Lisainfo: Grommet for stabilizer, rear, ®15 mm
• Additional information: Grommet for stabilizer, rear, ®15 mm

Suspension: for vehicles without M technology, for vehicles without lowered suspension

• Diameter 4 [mm]: 15
• Fitting Position: Front Axle Left, Front Axle Right, outer
• Inner Diameter [mm]: 19
• Manufacturer: JP GROUP
• Lisainfo: Grommet for stabilizer, front, ®19 mm
• Additional information: Grommet for stabilizer, front, ®19 mm

• Construction Year from: 10.1991
• Fitting Position: Rear Axle Left, Rear Axle Right
• Diameter [mm]: 17
• Mounting Type: Rubber Mount
• Name: Stabilizer mount left=right
• Quality class: PJ

Suspension: for vehicles with lowered suspension, for vehicles with sports suspension Lisainfo: "Tootja: SRL
BMW 3 E36/ 5 E34
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 3 E36/ 5 E34
(kvaliteediklass: PJ)"

• Construction Year to: 06.1992
• Engine Code: M50 B20 (206S1), M50 B20 (206S2), M52 B20 (206S3)
• Block Separation:
• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Inner Diameter [mm]: 15
• Lisainfo: Bush, stabilizer
• Additional information: Bush, stabilizer

Suspension: for vehicles without M technology, for vehicles without lowered suspension

• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 16
• Manufacturer: 3RG

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 10.1991
• Stabiliser Bar Diameter [mm]: 18
• Block Separation:
• Length [mm]: 40
• Inner Diameter [mm]: 18
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.028
• Name: Paigutus - K„„ndmik BMW T. E36/46
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.1992
• Engine Code: M50 B20 (206S1), M50 B20 (206S2), M52 B20 (206S3)
• Block Separation:
• Fitting Position: inner, Rear Axle Right, Rear Axle Left
• Inner Diameter [mm]: 15
• Required quantity: 2
• Name: Paigutus - K„„ndmik BMW T. E32/34/3
• Manufacturer: MEY
• Lisainfo: 3003355107
• Additional information: 3003355107

Suspension: for vehicles without M technology, for vehicles without lowered suspension

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 10.1991
• Stabiliser Bar Diameter [mm]: 18
• Block Separation:
• Length [mm]: 40
• Inner Diameter [mm]: 18
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.028
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.1991
• Block Separation:
• Fitting Position: Front Axle Left
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 18
• Replace in pairs only:
• Quantity per axle: 2
• Manufacturer: TOPRAN

Suspension: for vehicles with M technology, for vehicles with lowered suspension General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 02.1998
• Fitting Position: both sides, Rear
• Quality: OE Performance
• Material: Rubber
• Colour: black
• Weight [g]: 31
• Inner Diameter [mm]: 14
• Manufacturer: GATES PASKI PRZEWODY

• Construction Year from: 10.1991
• Stabiliser Bar Diameter [mm]: 18
• not for engine code: M52 B20 (206S3)
• Fitting Position: Rear Axle Right, Rear Axle Left
• Inner Diameter [mm]: 18
• Required quantity: 2
• Manufacturer: MEY

Name: Paigutus - K„„ndmik BMW T. 3 (E36) (09/90-08/00), 3 (E46) (02/98-12/07), 5 (E34) (12/87-01/97), Z4 (E85) (02/03-/), Z4 (E86) (03/06-/)

• Suspension: for vehicles with standard suspension
• Construction Year from: 10.1991
• Construction Year to: 06.1992
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 25
• Lisainfo: Grommet for stabilizer front, ®25 mm
• Additional information: Grommet for stabilizer front, ®25 mm

• Suspension: for vehicles with standard suspension
• Construction Year from: 06.1992
• Fitting Position: Front Axle Left, inner
• Inner Diameter [mm]: 24
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Construction Year from: 10.1991
• Block Separation:
• Fitting Position: Front Axle Left
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 25.5
• Replace in pairs only:
• Quantity per axle: 2
• Manufacturer: TOPRAN

Suspension: for vehicles with M technology, for vehicles with lowered suspension General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year to: 06.1992
• Block Separation:
• Length [mm]: 40
• Width [mm]: 31
• Thickness [mm]: 32
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 34
• Material: Rubber
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.03
• Manufacturer: SWAG

Suspension: for vehicles without lowered suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year to: 06.1992
• Block Separation:
• Length [mm]: 40
• Width [mm]: 31
• Thickness [mm]: 32
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 34
• Material: Rubber
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.03
• Name: Paigutus - K„„ndmik BMW T. E32/34/36
• Manufacturer: FEB

Suspension: for vehicles without lowered suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 15
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle both sides, inner
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 31
• Length [mm]: 41
• paired article number: 270907
• Weight [kg]: 0.04
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Inner Diameter [mm]: 17
• Fitting Position: Rear Axle
• Required quantity: 2
• Name: Paigutus - K„„ndmik BMW T. SERIES 3 (E36)
• Manufacturer: TED

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 10.1991
• Block Separation:
• Material: Rubber
• Observe service information:
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 60
• Width [mm]: 53
• Inner Diameter [mm]: 26
• Name: Paigutus - K„„ndmik BMW P. E36 318-328 90-99
• Manufacturer: MAX

Suspension: for vehicles with sports suspension, for vehicles with M technology

• Suspension: for vehicles with standard suspension
• Construction Year from: 06.1992
• Fitting Position: Front Axle Left
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 24
• Replace in pairs only:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 10.1991
• Fitting Position: Rear Axle
• Mounting Type: Rubber Mount
• Diameter [mm]: 17
• Name: Paigutus - K„„ndmik BMW T. E36/46
• Manufacturer: LMI

Suspension: for vehicles with sports suspension, for vehicles with lowered suspension SVHC: No information available, please contact the manufacturer!

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 10.1991
• Block Separation:
• Inner Diameter [mm]: 25.5
• Required quantity: 2
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.14
• Manufacturer: VAICO

Suspension: for vehicles with sports suspension, for vehicles with M technology General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1129700
• Fitting Position: Rear
• Weight [g]: 27
• Inner Diameter [mm]: 16
• Name: IM 35383
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles with standard suspension
• Construction Year from: 10.1991
• Construction Year to: 06.1992
• Fitting Position: inner, Front Axle Right, Front Axle Left
• Inner Diameter [mm]: 25
• Required quantity: 2
• Name: Paigutus - K„„ndmik BMW P. E36 318-325 90-99
• Manufacturer: MAX

• Construction Year from: 06.1992
• Fitting Position: Rear Axle both sides
• Required quantity: 2
• Inner Diameter [mm]: 15
• paired article number: VKDS 458506
• Name: SK VKDS458506
• Manufacturer: SKF

• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 358044
• Length [mm]: 60
• Height [mm]: 54.2
• Inner Diameter [mm]: 23
• Manufacturer: SKF
• Name: SK VKDS358044

• Suspension: for vehicles with standard suspension
• Construction Year from: 10.1991
• Construction Year to: 06.1992
• Fitting Position: Front Axle Left
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 25
• Replace in pairs only:
• Quantity per axle: 2
• Name: Paigutus - K„„ndmik BMW P. E36 WEW.
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle both sides, inner
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 30
• Length [mm]: 40
• paired article number: 271049
• Weight [kg]: 0.04
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 06.1992
• Block Separation:
• Length [mm]: 60.5
• Width [mm]: 53.1
• Inner Diameter [mm]: 24
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.13
• Name: Paigutus - K„„ndmik BMW P. E36 318-328 90-99
• Manufacturer: FEB

Suspension: for vehicles without sports suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Construction Year from: 10.1991
• Construction Year to: 05.1992
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 25
• SVHC: No SVHC present!
• Manufacturer: FAG

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 06.1992
• Block Separation:
• Inner Diameter [mm]: 24
• Material: Rubber
• Observe service information:
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 61
• Width [mm]: 53
• Name: Paigutus - K„„ndmik BMW P. E36 318-328 90-99
• Manufacturer: MAX

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 06.1992
• Block Separation:
• Length [mm]: 60.5
• Width [mm]: 53.1
• Inner Diameter [mm]: 24
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.13
• Manufacturer: SWAG
• Name: SW 20 93 7945

Suspension: for vehicles without sports suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 10.1991
• Block Separation:
• Length [mm]: 60.3
• Width [mm]: 53
• Inner Diameter [mm]: 25.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.125
• Manufacturer: SWAG

Suspension: for vehicles with sports suspension, for vehicles with M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M50 B20 (206S1)
• Construction Year from: 10.1991
• Construction Year to: 06.1992
• Length [mm]: 60.5
• Width [mm]: 53
• Inner Diameter [mm]: 25.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.13
• Name: Paigutus - K„„ndmik BMW P. E36 318-325 90-99
• Manufacturer: FEB

Suspension: for vehicles without sports suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Construction Year from: 10.1991
• Construction Year to: 06.1992
• Fitting Position: inner, Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 25
• Required quantity: 2
• Name: Paigutus - K„„ndmik BMW P. E36 318-325 90-99
• Manufacturer: MEY

• Engine Code: M50 B20 (206S1), M52 B20 (206S3)
• Construction Year from: 10.1991
• Block Separation:
• Length [mm]: 60.3
• Width [mm]: 53
• Inner Diameter [mm]: 25.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.125
• Name: Paigutus - K„„ndmik BMW P. E36 318-328 90-99
• Manufacturer: FEB

Suspension: for vehicles with sports suspension, for vehicles with M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 25.5
• Required quantity: 2
• Name: Paigutus - K„„ndmik BMW P. E36 318-328 90-99
• Manufacturer: MEY

• Engine Code: M50 B20 (206S1)
• Construction Year from: 10.1991
• Construction Year to: 06.1992
• Length [mm]: 60.5
• Width [mm]: 53
• Inner Diameter [mm]: 25.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.13
• Manufacturer: SWAG

Suspension: for vehicles without sports suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Construction Year from: 06.1992
• Fitting Position: inner, Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 24
• Required quantity: 2
• Name: Paigutus - K„„ndmik BMW P. E36 318-328 90-99
• Manufacturer: MEY

• Fitting Position: Front Axle, Lower
• Stabiliser Bar Diameter [mm]: 24
• Manufacturer: DELPHI
• Name: DE TD1213W

• Fitting Position: inner, Rear Axle
• Inner Diameter [mm]: 14
• Material: PU (Polyurethane)
• Required quantity: 2
• Supplementary Article/Info 2: with grease cap
• Manufacturer: TED

Name: Paigutus - K„„ndmik BMW T. E32/34/36 Q:14MM WEW !!!POLIURETAN!!!

• Fitting Position: inner, Rear Axle
• Inner Diameter [mm]: 17
• Material: PU (Polyurethane)
• Supplementary Article/Info 2: with grease cap
• Required quantity: 2
• Manufacturer: TED

Name: Paigutus - K„„ndmik BMW T. E36/46 Q:17MM WEW !!!POLIURETAN!!!

• Fitting Position: inner, Front Axle
• Inner Diameter [mm]: 23
• Material: PU (Polyurethane)
• Supplementary Article/Info 2: with grease cap
• Required quantity: 2
• Manufacturer: TED

Name: Paigutus - K„„ndmik BMW P. E36 318-325 90-99 Q:23MM WEW !!!POLIURETAN!!!