Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut,
rear -
Additional information: Bearing for strut,
rear
- Fitting Position: Rear Axle
- Manufacturer: ELRING
- Fitting Position: Upper
- Weight [kg]: 0.25
- Weight [g]: 250
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Required quantity: 1
- Weight [g]: 255
- Name: IM 30809
- Manufacturer: ORIGINAL IMPERIUM
- Quantity Unit: Set
- Fitting Position: Rear Axle
- Weight [kg]: 0.253
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Required quantity: 2
- Manufacturer: TEDGUM
- Quantity per axle: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Name: Laager -
Kndmik. BMW T. E30 82- - Manufacturer: SAA
for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Name: CFD PK1510
- Manufacturer: DACO
- Fitting Position: Front Axle
- for OE number: 6N0413175A
- Manufacturer: KAMOKA AMORTYZATORY
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW E36/E46
(kvaliteediklass: PJ)"
- Quantity per axle: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: LMI
for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer! Name: Laager - Kndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Height [mm]: 195
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without ball bearing
- Weight [kg]: 0.263
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: POLCAR
ALFA ROMEO 33
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Required quantity: 2
- Quantity Unit: Piece
- Net weight [kg]: 0.25
- Name:
- Manufacturer: NK
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Manufacturer: JP GROUP
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount -
Supplementary Article/Supplementary Info: with seal,
Rolling Bearing is not required - Manufacturer: METZGER
- Fitting Position: Front Axle
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Name: CFD PK4780
- Manufacturer: DACO
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: POLCAR
3 COUPE (E46), 04.99
(kvaliteediklass: Q)"
-
Material: Rubber/
Metal - Supplementary Article/Supplementary Info: with seal
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Suspension: for vehicles with M technology
- Fitting Position: Rear Axle
- Height [mm]: 194
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without ball bearing
- reinforced version:
-
Supplementary Article/Supplementary Info: with seal,
Rolling Bearing is not required - Slim Set:
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: Laager - Kndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR Z USZCZELK¤
-
Fitting Position: Rear Axle,
Rear Axle both sides - Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW E46
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW E46
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: without bearing
- Warranty: 5 years warranty
- Packaging length [cm]: 14
- Packaging width [cm]: 4.4
- Packaging height [cm]: 14.5
- Manufacturer: MONROE
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW/FIAT/SKODA FABIA
(kvaliteediklass: PJ)"
- Quantity per axle: 2
- Alternatively:
- Supplementary Article/Supplementary Info: with seal
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Name: Laager -
Kndmik. BMW T. E30/ E36/ E46 Z USZCZELK¤ - Manufacturer: LMI
for OE number: 1 092 362, 1 123 351, 1 125 554, 1 128 734, 1 128 819, 1 137 972, 33 52 1 092 362, 33 52 1 123 351, 33 52 1 125 554, 33 52 1 128 734, 33 52 1 128 819, 33 52 1 137 972, 33 52 6 772 864, 6 772 864 SVHC: No information available, please contact the manufacturer!
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Rear Axle
- Weight [kg]: 0.192
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
- Additional information: F13096
- Lisainfo: F13096
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Weight [kg]: 0.4
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
-
Fitting Position: Right,
Left, Rear Axle - Width 1 [mm]: 33
- Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Manufacturer: SNR
- Name: SN KB950.00
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.17
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 251
- Component Number: 4
- Name: IM 50171
- Manufacturer: ORIGINAL IMPERIUM
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Rear Axle
- Weight [kg]: 0.192
- Manufacturer: SWAG
- Name: SW 20 91 3096
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Weight [kg]: 0.4
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Suspension: for vehicles with M technology
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Weight [kg]: 0.214
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Manufacturer: AUTOFREN REPERATURKI
-
Name: SE D5-
009
- Fitting Position: Front Axle
- Weight [kg]: 0.7
- Supplementary Article/Info 2: with bearing
- Warranty: 5 years warranty
- Packaging length [cm]: 15.1
- Packaging width [cm]: 8.4
- Packaging height [cm]: 14.6
- Manufacturer: MONROE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks