• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B57 D30 A
• Required quantity: 1
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Quantity: 1
• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10501

• Engine Code: B57 D30 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 2
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Housing Colour: black
• Fitting Position: Cylinder Head
• Power [W]: 0.06
• Manufacturer: METZGER

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Engine Code: B57 D30 A
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: B57 D30 A
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

Manufacturer: VERNET

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Fabrication Number: ECS-BM-004
• Manufacturer: NTY

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 50
• Name: DE PS20078-12B1
• Manufacturer: DELPHI

• Exhaust System: before exhaust gas recirculation
• Manufacturer: NRF

• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 14
• Name: DE DPS00033-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Colour: black
• Connector Shape: oval
• Fabrication Number: ECS-BM-006
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Opening pressure [kPa]: 5
• Name: DE DPS00058-12B1
• Manufacturer: DELPHI

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Construction Year from: 11.2017
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366149

• Engine Code: B57 D30 A
• Required quantity: 1
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of connectors: 3
• Fabrication Number: ECS-BM-008
• Manufacturer: NTY

• Fitting Position: Intake Manifold
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: B57 D30 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Cable Length [mm]: 590
• Number of pins: 2
• Warranty: 3 years warranty
• Name: CE 30SKV448
• Manufacturer: ESEN SKV

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629

• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Construction Year to: 12.2019
• Fitting Position: Particulate Filter
• Transmission Type: Automatic Transmission
• Required quantity: 1
• for OE number: 13628570234
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 332
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 35
• Gross Weight [g]: 63
• Manufacturer: DENSO
• Name: DN DET-0151

• Fitting Position: after soot particulate filter
• Overall Length [mm]: 453
• Cable Length [mm]: 310
• Fitting Depth [mm]: 59
• Connector Shape: D Shape
• Connecting thread: M12x1.25-6e
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Construction Year from: 10.2017
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Overall Length [mm]: 660
• Manufacturer: BOSCH

• Construction Year from: 10.2017
• Construction Year to: 10.2017
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Transmission Type: Automatic Transmission
• Colour: black
• Operating Mode: Electric
• Number of pins: 6
• Material: Plastic
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Construction Year from: 10.2017
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Shape: Square
• Number of mounting bores: 2
• Cable Length [mm]: 1,000
• Connector Shape: oval
• Number of pins: 4
• Socket colour: black
• for OE number: 13 62 8 582 026
• Name: Tahkete osakeste sensor
• Manufacturer: MD

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Length [mm]: 660
• not for OE number: 13627101680
• Manufacturer: METZGER

• Construction Year from: 10.2017
• Construction Year to: 10.2017
• Number of pins: 4
• New Part:
• Used part return not required:
• for OE number: 13628583496
• Manufacturer: METZGER

• Construction Year from: 10.2017
• Name: NOx-sensor, karbamiidipritse
• Manufacturer: BOS

• not for emission standard: Euro 3, Euro 5
• not for SA code: S169A, S161A
• Block Separation:
• Length [mm]: 1,040
• Number of connectors: 5
• Manufacturer: METZGER

Fitting Position: before SCR catalytic converter, after SCR catalytic converter

• Exhaust System: before soot particulate filter
• for OE number: 13628570686