• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: -40, 150
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Number of connectors: 2
• Colour: black
• Material: Plastic
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 340
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: Cylinder Head
• Length [mm]: 48
• Housing Colour: black
• Spanner Size: 22
• Manufacturer: KAMOKA

• Connector Shape: rectangular
• Thread Size: M12
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.2
• Name: OLISURVELšLITUS
• Manufacturer: MAX

Fabrication Number: ECT-BM-011

Fabrication Number: ECT-BM-012

• Length [mm]: 64
• Housing Colour: black
• Manufacturer: KAMOKA

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M43 B19 (194E1)
• Pressure [bar]: 0
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Tightening torque from [Nm]: 50
• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Tolerance [%]: 10
• Thread Size: M12x1,5
• Spanner Size: 24
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL006097001
• Manufacturer: HELLA

• Thread Size: M 12x1,5
• Housing Colour: brown
• Number of pins: 1
• Manufacturer: FAE

• Pressure [bar]: 5
• Housing Colour: brown
• Thread Size: M12×1.5?6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90027
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.034
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 23 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 22
• Colour: black
• Fitting Position: Cylinder Head
• Number of pins: 2
• Thread Size: M12x1,5
• Length [mm]: 49
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Name: NI 207088
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Combi Switch Function: Normally Closed Contact
• Colour: brown
• Spanner Size: 24
• Thread Size: M12 x 1,5
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Length [mm]: 64
• Colour: black
• Material: Plastic
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.028
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Latching Connection
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 13621433077
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Supplementary Article/Info 2: without cable
• Fitting Position: Right, Exhaust Side, Intake Side
• Fabrication Number: ECP-BM-000

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: M43 B19 (194E1)
• Fitting Position: Engine Block
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: Active sensor
• for OE number: 12 14 1 435 351
• Manufacturer: KAMOKA

• Thread Size: M12x1,5
• Spanner Size: 24
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL009600271
• Manufacturer: HELLA

• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Side
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M43 B19 (194E1)
• Cooling Hose: from connecting pipe to engine cooler
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

Fabrication Number: ECP-BM-008

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring, without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Engine Code: M43 B19 (194E1)
• Number of pins: 3
• Connector Shape: oval
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Thread Size: M12x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107851
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV232
• Manufacturer: ESEN SKV

• Length [mm]: 64
• Width [mm]: 30
• Number of connectors: 2
• Colour: black
• Material: Plastic
• Fitting Position: Radiator, Right, Lower
• Weight [kg]: 0.016
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cooling Hose: from connecting pipe to engine cooler
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Length [mm]: 64
• Width [mm]: 30
• Number of connectors: 2
• Colour: black
• Material: Plastic
• Fitting Position: Radiator, Right, Lower
• Weight [kg]: 0.016
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 93 0645

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Active sensor
• for OE number: 13 62 7 787 192
• Manufacturer: KAMOKA

• Number of pins: 3
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Length [mm]: 28.2
• Number of connectors: 3
• Fitting Position: Exhaust Side, Intake Side
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Length [mm]: 28.2
• Number of connectors: 3
• Fitting Position: Exhaust Side, Intake Side
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 3799

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Height [mm]: 33
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• for model code: 3 Pin
• Number of pins: 3
• Manufacturer: DELPHI

• Length [mm]: 320
• Fabrication Number: ESL-BM-008

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Engine Code: M43 B19 (194E1)
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Length [mm]: 370
• Fabrication Number: ESL-BM-003

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Number of connectors: 3
• Weight [kg]: 0.03
• Name: SW 33 10 9727
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M43B19-E46
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Length [mm]: 955
• Fabrication Number: ESL-BM-004

Fitting Position: Front, Left Front, Right Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Required quantity: 1
• Engine Code: M 43194E1
• Fitting Position: Exhaust Side
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Installation Information: For vehicles of the E46 series with M52 engine (320i, 323i and 328i) whose production date is before 26.06.1998, If this sensor is replaced, the control unit is new program. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Housing Type: with housing
• Fabrication Number: EPP-BM-003

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Colour: black
• Number of pins: 3
• Weight [kg]: 0.03
• Fitting Depth [mm]: 33
• Manufacturer: ERA

• Length [mm]: 210
• Number of pins: 3
• Fitting Depth [mm]: 14
• Resistor M[ohm]: 13.5
• Manufacturer: ERA

• Housing Type: without housing
• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: EPP-BM-013

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

Fabrication Number: ESS-BM-003

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 340
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Number of pins: 5
• Connector Shape: D Shape
• Housing Type: with housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 3
• Fitting Depth [mm]: 33.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• for OE number: 13 62 1 433 565
• Manufacturer: KAMOKA

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: M43B19-E46
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012680011