Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front, Centre - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 5 tk
- Additional information: PAKENDIS 5 tk
- Diameter 4 [mm]: 15
- Axle alignment required after fitting:
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- for OE number: 33 55 1 131 155
- Weight [kg]: 0.041
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Rear -
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 47.2
- Height 1 [mm]: 47
- Height 2 [mm]: 39.8
- for OE number: 33176770788
- Manufacturer: SASIC
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Height 1 [mm]: 47
- Height 2 [mm]: 40
- Outer Diameter [mm]: 47
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: for trailing arm
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.2
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Right,
Front -
Lisainfo: Rubber mount for rear axle beam,
front, right -
Additional information: Rubber mount for rear axle beam,
front, right
-
Fitting Position: Rear Axle Left,
Front -
Lisainfo: Rubber mount for rear axle beam,
front, left -
Additional information: Rubber mount for rear axle beam,
front, left
-
Fitting Position: Front,
Rear Axle - Required quantity: 2
- Name: COC 80004644
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear -
Lisainfo: Rubber mount for rear axle beam,
rear -
Additional information: Rubber mount for rear axle beam,
rear
-
Fitting Position: Rear Axle both sides,
Rear, inner - Length [mm]: 63
-
Material: Rubber/
Metal - Inner Diameter [mm]: 21
- Outer Diameter [mm]: 72
- Manufacturer: MERTZ
-
Lisainfo: M-
S4404 -
Additional information: M-
S4404
-
Length [mm]: 47,
40 - Thickness [mm]: 40
- Outer Diameter [mm]: 47
-
Fitting Position: Rear Axle Left,
Front, Centre, Rear Axle Right - Weight [kg]: 0.1
-
Name: Paigutus -
Kndmik BMW T. E46 - Manufacturer: FEB
- Additional information: FE12508
- Lisainfo: FE12508
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear,
outer, Rear Axle Left, Rear Axle Right -
Mounting Type: Rubber-
Metal Mount -
Name: Paigutus -
Kndmik BMW T. E46 TY - Manufacturer: MAX
-
Length [mm]: 47,
40 - Outer Diameter [mm]: 47
-
Fitting Position: Rear Axle Left,
Front, Centre, Rear Axle Right - Weight [kg]: 0.1
- Manufacturer: SWAG
- Name: SW 20 79 0023
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle both sides,
Front - Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Name: ALT 83611AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Rear Axle Left,
Front - Axle alignment required after fitting:
-
Mounting Type: Rubber-
Metal Mount -
paired article number: V20-
0360 - Weight [kg]: 0.333
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: inner,
Rear Axle Right, Rear Axle Left, Front - Height [mm]: 47
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 47
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Paigutus -
Kndmik BMW T. E46 - Manufacturer: MEY
- Lisainfo: 3003317109
- Additional information: 3003317109
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front, inner -
Mounting Type: Rubber-
Metal Mount -
Name: Paigutus -
Kndmik BMW T. E46 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 49
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 60
- Required quantity: 2
- reinforced version:
- Replace in pairs only:
-
Name: Paigutus -
Kndmik BMW T. E36 - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
-
Fitting Position: Rear,
Rear Axle - Required quantity: 2
- Name: COC 80004642
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle,
outer, Rear, Lower - Width 1 [mm]: 63
- Inner Diameter 1 [mm]: 20
- Outer Diameter 1 [mm]: 72
- Manufacturer: DELPHI
- Name: DE TD949W
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Outer Diameter 1 [mm]: 72
- Inner Diameter 1 [mm]: 20
- Manufacturer: BGA
- Length [mm]: 63
- Inner Diameter [mm]: 20.5
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear, Rear Axle Right - Weight [kg]: 0.318
-
Name: Paigutus -
Kndmik BMW T. E46 TY LE/ PR - Manufacturer: FEB
- Additional information: FE12626
- Lisainfo: FE12626
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Front -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 70
- Width [mm]: 60
- paired article number: 829 0013 10
- SVHC: No SVHC present!
-
Name: Kinnitus,
sillatala - Manufacturer: FAG
-
Fitting Position: Rear Axle,
Front, Right - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Height 1 [mm]: 58
- Height 2 [mm]: 51
- for OE number: 33316770784
- paired article number: 9001792
- Manufacturer: SASIC
-
Fitting Position: Rear Axle,
Front, Left - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Height 1 [mm]: 58
- Height 2 [mm]: 51
- for OE number: 33316770783
- paired article number: 9001790
- Manufacturer: SASIC
- Length [mm]: 63
- Inner Diameter [mm]: 20.5
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear, Rear Axle Right - Weight [kg]: 0.318
- Name: SW 20 79 0042
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Right,
outer, Lower - paired article number: TD980W
- Width 1 [mm]: 66
- Inner Diameter 1 [mm]: 13
- Outer Diameter 1 [mm]: 70
- Manufacturer: DELPHI
- Name: DE TD981W
-
Fitting Position: Front,
Right, Rear Axle - Manufacturer: CORTECO
- Name: COC 80004648
-
Fitting Position: Front,
Left, Rear Axle - Manufacturer: CORTECO
- Name: COC 80004646
-
Fitting Position: Rear Axle Left,
outer, Lower - paired article number: TD981W
- Width 1 [mm]: 66
- Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 70
- Manufacturer: DELPHI
- Name: DE TD980W
- paired article number: 12627
- Length [mm]: 66
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Front - Weight [kg]: 0.308
-
Name: Puks -
Kndmik BMW T. E85/ E86 03- PRZàD LE - Manufacturer: FEB
- Additional information: F12628
- Lisainfo: F12628
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Height [mm]: 63
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 72
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Paigutus -
Kndmik BMW T. E46 TY LE/ PR - Manufacturer: MEY
- paired article number: 12628
- Length [mm]: 66
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Right,
Front - Weight [kg]: 0.308
-
Name: Puks -
Kndmik BMW T. E85/ E86 03- PRZàD PR - Manufacturer: FEB
- Additional information: FE12627
- Lisainfo: FE12627
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle both sides,
Rear - Inner Diameter [mm]: 20
- Outer Diameter [mm]: 82
- Name: ALT 85016AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Rear Axle Left,
Front - paired article number: BU0980
- Manufacturer: BGA
- paired article number: 20 79 0043
- Length [mm]: 66
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Right,
Front - Weight [kg]: 0.308
- Name: SW 20 79 0025
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Right
- Required quantity: 1
-
Material: Aluminium,
Rubber/ Metal - Weight [g]: 330
- Outer Diameter [mm]: 70
- Length [mm]: 66
- Name: IM 35212
- Manufacturer: ORIGINAL IMPERIUM
- paired article number: 20 79 0025
- Length [mm]: 66
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Front - Weight [kg]: 0.308
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear, outer -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
-
Name: Paigutus -
Kndmik BMW T. E46 TY LE/ PR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: inner,
Rear Axle Left, Rear - Height [mm]: 60
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 68
- Required quantity: 1
- reinforced version:
- Replace in pairs only:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- Required quantity: 2
-
Fitting Position: Rear Axle,
Rear -
Supplementary Article/Info 2: with grease cap,
with mounting manual - Manufacturer: TEDGUM
-
Fitting Position: Rear Axle,
Left, Rear -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 1
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Number of Parts [parts]: 4
-
Material: PU
(Polyurethane) - Name: TG TED68259
- Manufacturer: TEDGUM