• Fitting Position: Valve Unit
• Inner Diameter [mm]: 21.3
• Outer Diameter [mm]: 24.86
• Thickness [mm]: 1.78
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Name: Rongastihend
• Manufacturer: ELR

• Fitting Position: Valve Unit
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 41
• Thickness [mm]: 3.52
• Material: ACM (Polyacrylate)
• Shape: O-Ring
• Name: Rongastihend
• Manufacturer: ELR

• Name: Tihend, klapikaan
• Manufacturer: DRM

• Name: Tihend, seadeelement (ekstsentrikvoll)
• Manufacturer: DRM

• Colour: black
• Material: Plastic, Rubber
• Fitting Position: Rear
• Weight [kg]: 0.043
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: METZGER

• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.1
• Fitting Position: Rear
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Electric-hydraulic
• Supplementary Article/Supplementary Info: Incl. Strainer
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Fabrication Number: EFR-BM-000
• Manufacturer: NTY
• Name: NTY EFR-BM-000

• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MAX

• Article number of recommended accessories: TC0909FK
• Manufacturer: BGA

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Warranty: 3 years warranty
• Weight [kg]: 0.27
• Manufacturer: SKV GERMANY
• Name: CE 39SKV013

• Engine Code: N42 B20 A
• Fitting Position: Centre
• Quantity: 2
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MVE

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Supplementary Info: with seal
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 110
• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.243
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 110
• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.243
• Name: SW 20 10 3361
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N42 B20 A
• Construction Year to: 02.2004
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: FAI

• Fitting Position: Intake Side, Exhaust Side
• Operating Mode: Electric-hydraulic
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N42 B20 A, N46 B20 A, N46 B20 C
• Block Separation:
• Supplementary Article/Supplementary Info: Incl. Strainer
• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Weight [kg]: 0.242
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Valve type: for inlet valves, for exhaust valves
• Number of connectors: 2
• Manufacturer: ERA

• Number of pins: 9
• Name: Andur, ekstsentrikvoll (varieeruv klapisurve)
• Manufacturer: MAX

• Valve type: Solenoid Valve
• Number of pins: 2
• Supplementary Article/Supplementary Info: Incl. Strainer
• Version: Neue Ausführung
• Manufacturer: METZGER

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 9
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• paired article number: 54-1489
• Inner Diameter [mm]: 13
• Fitting Position: Exhaust Side
• Supplementary Article/Info 2: with screw
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• paired article number: 54-1490
• Inner Diameter [mm]: 13
• Fitting Position: Intake Side
• Supplementary Article/Info 2: with screw
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Valve type: Solenoid Valve
• Operating Mode: electromagnetic
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: VDO

• Engine Code: N46 B20 C, N42 B20 A, N46 B20 A
• Block Separation:
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: PIE

• Fabrication Number: ERZ-BM-000
• Manufacturer: NTY
• Name: NTY ERZ-BM-000

• Fabrication Number: RKZ-BM-007
• Manufacturer: NTY

• Fabrication Number: RKZ-BM-006
• Manufacturer: NTY

• Fitting Position: Intake Side
• Supplementary Article/Info 2: with screw
• Number of Teeth: 38
• Height [mm]: 43
• Manufacturer: KAMOKA

• Fitting Position: Exhaust Side
• Supplementary Article/Info 2: with screw
• Number of Teeth: 38
• Height [mm]: 43
• Manufacturer: KAMOKA

• Colour: chrome/black
• Number of pins: 9
• Fabrication Number: ECP-BM-013

• Weight [kg]: 1.13
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 96SKV086

• Fitting Position: Intake Side
• Number of Teeth: 38
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Intake Side
• Number of Teeth: 38
• Engine Timing: Timing Chain
• paired article number: 503 460
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of Teeth: 38
• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Operating Mode: Hydraulic
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Engine Timing: Timing Chain
• paired article number: 503 459
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• paired article number: 47571
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 47572
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Intake Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 20 94 7572
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Intake Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Observe service information:
• Name: SW 20 94 7571
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 20 94 7571
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Weight [kg]: 0.94
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• Engine Code: N46 B20 A, N46 B20, N42 B20
• Supplementary Article/Supplementary Info: with seal
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Manufacturer: VDO

Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• Fitting Position: Intake Side
• Number of bolts/screws: 1
• Number of Teeth: 38
• Manufacturer: SKF

• Engine Code: N42 B20 A
• Fitting Position: Exhaust Side
• Name: Nukkvolliseadistaja
• Manufacturer: MVE

• Engine Code: N42 B20 A
• Fitting Position: Inlet
• Name: Nukkvolliseadistaja
• Manufacturer: MVE

• Fitting Position: Intake Side
• Number of Teeth: 38
• paired article number: 58384
• Supplementary Article/Info 2: with screw
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• paired article number: 58385
• Supplementary Article/Info 2: with screw
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N42 B20
• Colour: chrome/black
• Number of pins: 9
• Manufacturer: VDO

• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.932
• Manufacturer: VEMO GERMANY

Supplementary Article/Info 2: Control Unit/Software must be trained/updated, with flanged nut General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.