• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Fitting Depth [mm]: 28
• Cable Length [mm]: 415
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Fitting Position: Intake Side
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 295
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Regulating Probe
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: after catalytic converter
• Number of circuits: 4
• Switch Point [°C]: 98
• Cable Length [mm]: 1,000
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Housing Diameter [mm]: 13
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 40
• Mounting Type: Pressed
• for OE number: 13 62 1 739 510, NNK000020
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Length [mm]: 79
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Supplementary Article/Info 2: without cable
• Fitting Position: Right, Exhaust Side, Intake Side
• Fabrication Number: ECP-BM-000
• Manufacturer: NTY

• Manufacturer: DELPHI
• Name: DE TS10485

• Sensor Type: Active sensor
• for OE number: 12 14 1 435 351
• Manufacturer: KAMOKA

• Number of pins: 2
• Socket colour: black
• Connector Shape: rectangular
• Mounting Type: Plugged
• Fastening Type: Pin Fixing
• Housing Diameter [mm]: 12.95
• for OE number: 13 62 1 433 077
• Manufacturer: MEAT&DORIA

• Fitting Position: Exhaust Side
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M54 B30 (306S3)
• Cooling Hose: from connecting pipe to engine cooler
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring, without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Engine Code: M54 B30 (306S3)
• Number of pins: 3
• Connector Shape: oval
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Fitting Position: Intake Side
• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 78.5
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 9
• Fabrication Number: ECP-BM-015
• Manufacturer: NTY

• Mounting Type: Plugged
• Voltage [V]: 12
• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309541
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV232
• Manufacturer: ESEN SKV

• Engine Code: M54 B30 (306S3)
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Voltage [V]: 12
• Length [mm]: 425
• Number of pins: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV231
• Manufacturer: ESEN SKV

• Length [mm]: 535
• Fitting Position: Intake Side
• Observe service information:
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Sensor Type: Active sensor
• for OE number: 13 62 7 787 192
• Manufacturer: KAMOKA

• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Length [mm]: 28.2
• Number of connectors: 3
• Fitting Position: Exhaust Side, Intake Side
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Length [mm]: 28.2
• Number of connectors: 3
• Fitting Position: Exhaust Side, Intake Side
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 3799

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 13 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Engine Code: M54 B30 (306S3)
• Fitting Position: Engine Block
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Number of pins: 3
• Cable Length [mm]: 510
• Fitting Position: Intake Side
• Manufacturer: MEAT&DORIA

• Length [mm]: 320
• Fabrication Number: ESL-BM-008
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Length [mm]: 370
• Fabrication Number: ESL-BM-003
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 990
• Fabrication Number: ESL-BM-002
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 490
• Number of pins: 3
• Fitting Depth [mm]: 28
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Length [mm]: 495
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10814

• Engine Code: M54B30
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Mounting Type: Plugged
• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: green, black
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109131
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Exhaust Side
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Installation Information: For vehicles of the E46 series with M52 engine (320i, 323i and 328i) whose production date is before 26.06.1998, If this sensor is replaced, the control unit is new program. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Fitting Position: Intake Side
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 3 E46 2,2 00-
• Manufacturer: BRM

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: M54B30
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Required quantity: 1
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121701
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: with housing
• Fabrication Number: EPP-BM-010
• Manufacturer: NTY

• Length [mm]: 210
• Number of pins: 3
• Fitting Depth [mm]: 14
• Resistor M[ohm]: 13.5
• Manufacturer: ERA

• Length [mm]: 535
• Number of connectors: 3
• Fitting Position: Intake Side
• Cable Length [mm]: 475
• Weight [kg]: 0.057
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ESS-BM-003
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Length [mm]: 535
• Number of connectors: 3
• Fitting Position: Intake Side
• Cable Length [mm]: 475
• Weight [kg]: 0.057
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 4162

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Required quantity: 1
• Voltage [V]: 12
• Length [mm]: 405
• Fitting Position: Intake Side
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Number of mounting bores: 1
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121641
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.2006
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 09.2006
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: M54 B30 (306S3)
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 290
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Cable Length [mm]: 500
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Fitting Position: Intake Side
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Number of pins: 3
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Engine Code: M54 B30 (306S3)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Number of pins: 3
• Suction pipe connector diameter [mm]: 90
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 300
• Cable Length [mm]: 300
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M54 B30 (306S3), M54306S3
• Cable Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Engine Code: M54 B30 (306S3)
• Name: EP 1.953.471
• Manufacturer: EPS

• Length [mm]: 990
• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 990
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: M54 B30 (306S3)
• Voltage [V]: 12
• Length [mm]: 430
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV080
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 990
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV665
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Construction Year to: 09.2006
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

Fitting Position: before catalytic converter, after catalytic converter

• Number of pins: 3
• Name: Ohumassimootja
• Manufacturer: MAX

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 3
• Weight [kg]: 0.23
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV123
• Manufacturer: ESEN SKV

• Cable Length [mm]: 200
• Number of pins: 4
• Manufacturer: DELPHI
• Name: DE AS10241

• Engine Code: M54 B30 (306S3)
• Length [mm]: 225
• Cable Length [mm]: 315
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 350
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, before catalytic converter

• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 980
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, after catalytic converter

• Number of connectors: 3
• Manufacturer: MEAT&DORIA

• Construction Year to: 09.2006
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 320
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Housing Type: with housing
• Number of pins: 3
• Housing material: Plastic
• Connector Shape: rectangular
• Recommended additional repairs: Air Filter
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 09.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS