• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Construction Year to: 06.1994
• Length [mm]: 230
• Number of wear indicators [per axle]: 1
• Net weight [kg]: 0.02
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: NK

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.07

• Fitting Position: Rear Axle
• Construction Year from: 07.1994
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.05

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.04

• Construction Year from: 07.1994
• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2387A
• Additional information: D42387A AUT
• Lisainfo: D42387A AUT

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 237
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0107A

• Brake System: ATE
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 265
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Thread Size: M8 x 1,25
• Length [mm]: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Fitting Position: Front Axle both sides, Rear Axle both sides
• Quantity Unit: Set
• Quantity: 2
• Quality/ Grade: 8,8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 230
• Brake Type: Disc Brake
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: both sides
• Brake Type: Disc Brake
• Length [mm]: 230
• Supplementary Article/Info 2: with protection hose
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk
• Additional information: M8x1.25 16,0mm Hex-6 2tk

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Length [mm]: 235
• Brake Type: Disc Brake
• Manufacturer: LPR

• Fitting Position: Front Axle, Rear Axle
• Construction Year to: 05.1994
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 220
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Rear Axle, Front Axle
• Length [mm]: 225
• Number of connectors: 2
• Brake Type: Disc Brake
• Weight [kg]: 0.025
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

Fitting Position: Front Axle

• Brake System: ATE
• Fitting Position: Front Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2558A

• Fitting Position: Rear Axle
• Brake System: ATE
• Construction Year to: 06.1994
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Length [mm]: 15.6
• Thread Size: M8X1,25
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Hexagon Socket
• Available as universal article as well, see article no.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: ERT

• Fitting Position: Rear Axle
• Brake System: ATE
• Construction Year from: 07.1994
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 230
• Brake Type: Disc Brake
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.04
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• Fitting Position: Rear Axle
• Brake System: ATE
• Construction Year to: 06.1994
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0136
• Quality class: PJ

Additional information: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 220
• Packaging length [cm]: 18.5
• Packaging width [cm]: 12.5
• Packaging height [cm]: 1
• Weight [kg]: 0.008
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Length [mm]: 15.7
• Thread Size: M8X1,25
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Hexagon Socket
• Available as universal article as well, see article no.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake System: ATE
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0135
• Quality class: PJ

Additional information: "Tootja: DELPHI
7 (E32), 09.86-09.94
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
7 (E32), 09.86-09.94
(kvaliteediklass: PJ)"

Fitting Position: Rear Axle

• Fitting Position: Front Axle, Rear Axle
• Construction Year to: 06.1994
• Brake Type: Disc Brake
• Length [mm]: 230
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Construction Year to: 06.1994
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Rear Axle
• Brake System: ATE
• Construction Year from: 07.1994
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0295
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Construction Year to: 06.1994
• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 220
• Packaging length [cm]: 20
• Packaging width [cm]: 12
• Packaging height [cm]: 1
• Weight [kg]: 0.008
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TEX

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 220
• Number of wear indicators [per axle]: 1
• Name: BR A 00 516
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Construction Year from: 07.1994
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Construction Year to: 05.1994
• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 235
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• Net weight [kg]: 0.25
• Name: Plekk,piduriketas
• Manufacturer: NK

• for brake disc diameter [mm]: 315, 345
• for brake disc thickness [mm]: 28, 32
• Block Separation:
• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 330
• Inner Diameter [mm]: 105

• for brake disc diameter [mm]: 315, 345
• for brake disc thickness [mm]: 28, 32
• Block Separation:
• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 330
• Inner Diameter [mm]: 105

• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 105
• Outer Diameter [mm]: 332
• paired article number: 131-07-159
• Colour: black
• Material: Aluminium
• Surface: Cathodic Painting
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 105
• Outer Diameter [mm]: 332
• paired article number: 131-07-160
• Colour: black
• Material: Aluminium
• Surface: Cathodic Painting
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 770
• Braking/Drive Dynamics: for vehicles with ABS
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Material: Aluminium
• Surface: Painted, Cathodic Painting
• paired article number: 57127
• Diameter 1/ Diameter 2 [mm]: 105 / 330
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• Material: Aluminium
• Surface: Painted, Cathodic Painting
• paired article number: 57126
• Diameter 1/ Diameter 2 [mm]: 105 / 330
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 260
• Supplementary Article/Supplementary Info: Axle Kit