• Fitting Position: Intake Side
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Height [mm]: 34.7
• Outer Diameter [mm]: 12
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: N52 B25 A
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Diameter [mm]: 12
• Height [mm]: 34.7
• Fitting Position: Exhaust Side, Intake Side
• Name: KLAPITAPP
• Manufacturer: FRE
• Lisainfo: PI 06-0019
• Additional information: PI 06-0019

• Thickness [mm]: 34.63
• Outer Diameter [mm]: 12
• Operating Mode: Hydraulic
• Fitting Position: Exhaust Side
• Weight [kg]: 0.02
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Side
• Required quantity: 12
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Height [mm]: 35
• Diameter [mm]: 12
• SVHC: No SVHC present!
• Name: KLAPITAPP
• Manufacturer: INA

• Engine Code: N52 B25 A
• Fitting Position: Exhaust Side, Intake Side
• Diameter [mm]: 12
• Height [mm]: 31.6
• Height 1 [mm]: 25
• Height 2 [mm]: 34.5
• Operating Mode: Hydraulic
• Quantity: 1
• Ball Diameter [mm]: 8.4
• Name: KLAPITAPP
• Manufacturer: FAI

• Engine Code: N52 B25 A
• Fitting Position: Exhaust Side
• Required quantity: 12
• Name: Nookur, mootorijuhtimine
• Manufacturer: MVE

• Engine Code: N52 B25 A
• Quantity per packing unit: 8
• Fitting Position: Exhaust Side, Intake Side
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: FRE
• Lisainfo: RA06-950
• Additional information: RA06-950

• Fitting Position: Intake Side
• Required quantity: 12
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Height [mm]: 33
• Diameter [mm]: 12
• SVHC: No SVHC present!
• Name: KLAPITAPP
• Manufacturer: INA

• Engine Code: N52 B25 A
• Operating Mode: Hydraulic
• Outer Diameter [mm]: 12
• Length [mm]: 34.5
• Fitting Position: Exhaust Side, Intake Side
• Name: Klapitapp
• Manufacturer: KS

• Valve type: for inlet valves
• Parameter: 1
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 2
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Required quantity: 12
• Valve type: for exhaust valves
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 3
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve type: for inlet valves
• Parameter: 5
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Engine Code: N52 B25 A
• Manufacturer: AE

• Valve type: for inlet valves
• Thickness [mm]: 33.4
• Outer Diameter [mm]: 12
• Operating Mode: Hydraulic
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.016
• for OE number: 11 33 7 548 690
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N52 B25 A
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: KS
• Quantity per packing unit: 4

• Fitting Position: Exhaust Side
• Weight [kg]: 0.037
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Side
• Weight [kg]: 0.037
• Name: SW 20 93 1268
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Fabrication Number: EFR-BM-001
• Manufacturer: NTY
• Name: NTY EFR-BM-001

• Engine Code: N52 B25 A
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MAX

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Fitting Position: Intake Side, Exhaust Side
• Connector Shape: rectangular
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 11 36 7 516 293
• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Manufacturer: KAMOKA

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 39SKV012

• Klapitüüp: Juhtklapp
• Rakendustüüp: elektriline-hüdrauliline
• Pinge [V]: 12
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 2
• Article number of recommended accessories: TC0940K
• Manufacturer: BGA

• Construction Year to: 08.2008
• Required quantity: 2
• Fitting Position: Cylinder Head
• Number of pins: 2
• Pin Shape: Flat
• Plug Type: Male
• Material: Metal
• Length [mm]: 119
• Width [mm]: 32
• Height [mm]: 32
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: GAT

• Version: 91542
• for OE number: 11367516293
• Manufacturer: MEAT&DORIA

• Engine Code: N52B25A
• Manufacturer: MAGNETI MARELLI

• Kaal (g): 173
• Garantii: 3 aastat garantii
• OE-numbri jaoks: 11 36 7 585 425
• Pikkus (mm): 139
• Laius (mm): 67
• Kõrgus (mm): 64
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• for OE number: 11 36 7 585 425
• Manufacturer: TRUCKTEC

• Engine Code: N52 B25 A
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: FAI

• Length [mm]: 118
• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.17
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Side, Intake Side
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Rakendustüüp: elektriline-hüdrauliline
• Klapitüüp: Sisselaskeklapi jaoks, väljalaskeklapile
• Pistikkontaktide arv: 2
• Manufacturer: HEPU

• Length [mm]: 118
• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.17
• Name: SW 20 10 3360
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ERZ-BM-001
• Manufacturer: NTY
• Name: NTY ERZ-BM-001

• Engine Code: N52 B25 A
• Connector Shape: rectangular
• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 1.21
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV089

• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Fabrication Number: RKZ-BM-001
• Number of Teeth: 38
• Manufacturer: NTY
• Name: NTY RKZ-BM-001

• Fitting Position: Exhaust Side
• Operating Mode: Hydraulic
• Fabrication Number: RKZ-BM-000
• Number of Teeth: 38
• Manufacturer: NTY
• Name: NTY RKZ-BM-000

• Operating Mode: Electric
• Number of pins: 2
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Valve type: Solenoid Valve
• Operating Mode: electromagnetic
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: VDO

• Engine Code: N52 B25 A
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: PIE

• Number of Teeth: 38
• Operating Mode: Hydraulic
• Fitting Position: Intake Side
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Klapitüüp: Juhtklapp
• Rakendustüüp: elektriline-hüdrauliline
• Pinge [V]: 12
• Versioon: Neue Version
• Manufacturer: METZGER

• Operating Mode: Hydraulic
• Fitting Position: Intake Side
• Number of Teeth: 38
• Engine Timing: Timing Chain
• paired article number: 503 867
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Exhaust Side
• Operating Mode: Hydraulic
• Number of Teeth: 38
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01503

• Fitting Position: Intake Side
• Number of Teeth: 38
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Number of Teeth: 38
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• OE-numbri jaoks: 11 37 7 548 388
• Garantii: 3 aastat garantii
• Pikkus (mm): 160
• Laius (mm): 115
• Kaal (g): 1 270
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: N52 B25 A
• Fitting Position: Intake Side
• Hammastehulk: 38
• Name: Nukkvolliseadistaja
• Manufacturer: MVE

• Engine Code: N52 B25 A
• Supplementary Article/Supplementary Info: without gasket/seal
• Article number of recommended accessories: VDO A2C59516958, BMW11 12 7 552 280
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Manufacturer: VDO

Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• Engine Code: N52 B25 A
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: PIERBURG

• Hammastehulk: 38
• Installatsiooni pool: Väljalaskepool
• paaris tootenumbrid: at22232
• Laius (mm): 100
• Kõrgus (mm): 95
• Pikkus (mm): 110
• Kaal (g): 711
• Garantii: 3 aastat garantii
• OE-numbri jaoks: 11 36 7 522 290
• Rakendustüüp: hüdrauliline
• Veoülekande liik: Kett
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Hammastehulk: 38
• Installatsiooni pool: Sisselaskepool
• paaris tootenumbrid: at22233
• Laius (mm): 100
• Kõrgus (mm): 95
• Pikkus (mm): 110
• Kaal (g): 705
• Garantii: 3 aastat garantii
• OE-numbri jaoks: 11 31 7 545 959
• Rakendustüüp: hüdrauliline
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.