• Fitting Position: both sides, Front, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Fabrication Number: EPDC-BM-011
• Manufacturer: NTY

• not for facelift:
• Fitting Position: both sides, Front, Rear, outer, inner
• Fabrication Number: EPDC-BM-000
• Manufacturer: NTY
• Name: NTY EPDC-BM-000

• Fitting Position: both sides, Front, Rear
• Number of pins: 3
• Socket colour: black
• Connector Shape: angled
• Fabrication Number: EPDC-BM-007
• Manufacturer: NTY

• Fitting Position: both sides, Front, inner, Rear, outer
• Number of pins: 3
• Shape: angled
• Connector Shape: round
• Sensor Type: Ultrasonic Sensor
• Socket colour: black
• Fabrication Number: EPDC-BM-003
• Manufacturer: NTY
• Name: NTY EPDC-BM-003

• Sensor Type: Ultrasonic Sensor
• Fitting Position: both sides, Front, Rear, inner
• Fabrication Number: EPDC-CH-002
• Manufacturer: NTY

• Fitting Position: Front, both sides, Rear
• Quantity: 8
• not for facelift:
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: both sides, Rear
• not for facelift:
• Voltage [V]: 12
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV006
• Manufacturer: ESEN SKV

• Fitting Position: both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Shape: angled
• Surface: primed
• Number of connectors: 3
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: both sides, Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 46
• Length from [mm]: 46
• Width [mm]: 45
• Height [mm]: 27
• Colour: black
• Shape: angled
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: both sides, Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 46
• Length from [mm]: 46.2
• Width [mm]: 44.61
• Height [mm]: 26.92
• Colour: black
• Shape: angled
• Number of connectors: 3
• Quality class: PJ
• Name: Parking sensor

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Quantity: 8
• Fitting Position: both sides, Front, Rear
• not for facelift:
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Number of pins: 3
• Length [mm]: 46
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Engine Code: N52 B30 A
• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Chemical Properties: Paintable
• for OE number: 6620 2 180 147
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Quantity: 8
• Fitting Position: both sides, Front, Rear
• not for facelift:
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Manufacturer: ZZVF

• Fitting Position: both sides, Front, Rear
• for facelift:
• Quantity: 8
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.35
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Engine Code: N52 B30 A
• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Chemical Properties: Paintable
• for OE number: 6620 2 180 147
• Name: SENSOR, PARKIMISABI
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer Restriction: BMW
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, sensor- parkimisabi
• Manufacturer: HBE

• for facelift:
• Required quantity: 8
• Fitting Position: Front, Rear
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Required quantity: 8
• Fitting Position: both sides, Front, Rear
• not for facelift:
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270361
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 8
• Fitting Position: both sides, Front, Rear
• not for facelift:
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: Ivory White
• Shape: angled
• Shaft form: round
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 8
• Fitting Position: both sides, Front, Rear
• not for facelift:
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of connectors: 3
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0002
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 8
• Fitting Position: both sides, Rear, Front
• not for facelift:
• Length [mm]: 46
• Width [mm]: 45
• Height [mm]: 27
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Housing Colour: beige
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0001
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Supplementary Article/Info 2: for retrofitted equipment
• Chemical Properties: Over-paintable
• Connector Shape: angled
• Manufacturer: METZGER

• Quantity: 8
• Fitting Position: both sides, Front, Rear
• not for facelift:
• Length [mm]: 46.17
• Width [mm]: 44.61
• Height [mm]: 26.92
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632200
• Additional information: VAL632200

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: Plugged
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Manufacturer: VALEO

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.22
• Name: PARKIMISABI
• Manufacturer: VAL

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 8
• Fitting Position: Front and Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Trailer Hitch: without parking distance control deactivation
• Mounting Time from (in hours): 3
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 2.08
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632202
• Additional information: VAL632202

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake