• Fitting Position: Left
• Lambda andur: Diagnoosisond
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 600
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Käigukasti liik: Käigukast
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: for cylinder 1-3, after catalytic converter, for cylinder 4-6

• Fitting Position: Front
• Lambda Sensor: Diagnostic Probe
• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 650
• Kaal (kg): 0,095
• Name: SW 33 10 3198
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: after catalytic converter
• Lambda andur: soojendatud, Diagnoosisond
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 460
• Kaal (kg): 0,086
• Name: SW 33 10 3200
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Exhaust Manifold, after catalytic converter
• Engine Code: N52 B30 A
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Quantity: 1
• Kaablipikkus (mm): 614
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20368-12B1

• Lambda Sensor: Diagnostic Probe
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Length [mm]: 910
• Fabrication Number: ESL-BM-020
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 450
• tootekoodile: 81633E
• Kvaliteet: OE EQUIVALENT
• Name: Lambda andur
• Manufacturer: MD

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV405

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Required quantity: 2
• Fitting Position: Exhaust Manifold
• Lambda andur: Lineaarne lambda andur
• Pistikkontaktide arv: 5
• Kaablipikkus (mm): 570
• OE-numbri jaoks: 7 569 930
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: for cylinder 1-3
• Lambda andur: Titaanandur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 650
• Piirangutega toode/piirangu info: soojuskaitsega
• Pistikkontaktide arv: 4
• Installatsiooni pool: pärast katalüsaatorit
• Name: Lambda andur
• Manufacturer: MEY

• Fitting Position: for cylinder 1-3, after catalytic converter
• Construction Year to: 07.2007
• Lambda Sensor: Diagnostic Probe
• Pikkus (mm): 550
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77005
• Manufacturer: FAE

• Construction Year to: 10.2005
• Fitting Position: Right Front, before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 312
• Lambda andur: Lineaarne lambda andur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20555-12B1

• Fitting Position: for cylinder 4-6
• Lambda andur: Titaanandur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 460
• Piirangutega toode/piirangu info: soojuskaitsega
• Pistikkontaktide arv: 4
• Installatsiooni pool: pärast katalüsaatorit
• Name: Lambda andur
• Manufacturer: MEY

• Fabrication Number: EGT-BM-019
• Voltage [V]: 12
• Number of pins: 2

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Quantity: 1
• Kaablipikkus (mm): 1
• Lambda andur: Lineaarne lambda andur, soojendatud
• Manufacturer: DLP

Name: SONDA LAMBDA BMW 125I, 130I, 135I, 323I TOURING 04-16

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N52 B30 A
• Fitting Position: Left Front, after catalytic converter
• Required quantity: 1
• Length [mm]: 560
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: N52 B30 A
• Construction Year to: 10.2005
• Fitting Position: Left Front, before catalytic converter
• Required quantity: 1
• Length [mm]: 380
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Construction Year from: 11.2005
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Kaablipikkus (mm): 910
• Lambda andur: Lineaarne lambda andur, soojendatud
• Name: DE ES21275-12B1
• Manufacturer: DELPHI

• Construction Year to: 10.2005
• Fitting Position: Right Front, before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe
• Required quantity: 1
• Lambda andur: Lineaarne lambda andur
• Kaablipikkus (mm): 400
• Pistikkontaktide arv: 6
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Manufacturer: HELLA
• Name: HE 6PA009166801

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 5
• Kaablipikkus (mm): 406
• Kaal (kg): 0,097
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 31.10.2005
• Lambda andur: Lineaarne lambda andur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 400
• Pistikkontaktide arv: 6
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: before catalytic converter, for cylinder 1-3, for cylinder 4-6

• Construction Year to: 10.2005
• Fitting Position: Left Front, before catalytic converter
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 352
• Lambda andur: Lineaarne lambda andur, soojendatud
• Manufacturer: DELPHI

• Engine Code: N52 B30 A
• Construction Year to: 10.2005
• Fitting Position: Right Front, before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Required quantity: 1
• Length [mm]: 340
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Production date from: 01.11.2005
• Fitting Position: for cylinder 4-6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda andur: Lineaarne lambda andur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 900
• Piirangutega toode/piirangu info: soojuskaitsega
• Pistikkontaktide arv: 6
• Installatsiooni pool: katalüsaatori ees
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 502
• Soovituslik vahetusintervall (km): 250 000
• Manufacturer: BOSCH

• Engine Code: N52 B30 A
• Construction Year from: 11.2005
• Fitting Position: Left Front, before catalytic converter
• Required quantity: 1
• Length [mm]: 1,400
• Cable Length [mm]: 1,500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Regulating Probe
• Construction Year from: 12.2005
• Construction Year to: 07.2007
• Fitting Position: for cylinder 4-6, before catalytic converter
• Pikkus (mm): 900
• Pistikkontaktide arv: 6
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 572
• Soovituslik vahetusintervall (km): 250 000
• Manufacturer: BOSCH

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Required quantity: 2
• Fitting Position: Exhaust Manifold
• Lambda andur: Lineaarne lambda andur
• Pistikkontaktide arv: 5
• Kaablipikkus (mm): 1 290
• tootekoodile: 81668E
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Ülekandeliinide arv: 5
• pikkus üle kõige (mm): 910
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 11.2005
• Installatsiooni pool: katalüsaatori ees
• Pistikkontaktide arv: 6
• Kaablipikkus (mm): 500
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Kaal (kg): 0,156
• Manufacturer: VALEO

Lambda andur: Titaanandur, Lineaarne lambda andur, Keere eelmääritud, soojendatud

• Construction Year from: 12.2005
• Required quantity: 2
• Fitting Position: Exhaust Manifold
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 1 405
• Keermemõõt: M18 x 1,5
• Ühendushulk: 5
• Pistikukatte kuju: D-kuju
• Pikkus (mm): 1 250
• Pistikkontaktide arv: 5
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 5
• Väljalaskesüsteem: pärast katalüsaatorit
• Kaal (kg): 0,188
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: for cylinder 4-6, after catalytic converter
• Construction Year to: 07.2007
• Lambda Sensor: Diagnostic Probe
• Pikkus (mm): 500
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77005
• Manufacturer: FAE

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Ülekandeliinide arv: 5
• pikkus üle kõige (mm): 470
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS